[Fri Dec  2 20:31:32 2011] Detection parameters:
  Position = (387.8, 490.7) = 14 45 29.63 -62 5 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.0 +/- 24.1
  Background counts = 74.7
  Rate = 0.002 +/- 0.0002

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 15.37'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 14.11"
[Sat Dec  3 12:28:30 2011] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.998
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 74 for pass 0, mean size = 14.11"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src74.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src74.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src74_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src74.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:16 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Sat Dec  3 16:57:16 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Sat Dec  3 16:57:16 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Sat Dec  3 16:57:55 2011] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 16.876048 pixels away
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 08:08:37 2011] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 14.11"
[Sun Dec  4 08:08:37 2011] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.998
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 72 for pass 1, mean size = 14.11"
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src72.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src72.csv
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src72_1.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src72.csv
[Sun Dec  4 15:56:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Sun Dec  4 15:56:59 2011] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 17.159236 pixels away
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:14 2011] XMMSAS src. selection expression = ellipse(33687.881989, 42642.528503, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src53_src.reg
[Mon Dec  5 01:14:14 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (350, 453) - (425, 528)
[Mon Dec  5 01:14:14 2011] XMMSAS bgd. selection expression = annulus(33687.881989, 42642.528503, 1087.500000, 2175.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src53.gif
[Mon Dec  5 02:40:59 2011] Mean detx,y = (-8780.70, 13811.65) 
[Mon Dec  5 02:41:00 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:41:15 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:41:15 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon Dec  5 02:41:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Mon Dec  5 06:14:42 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec  5 06:14:42 2011] rmf not generated due to insufficient counts
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon Dec  5 06:51:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:30 2011] Using photon index=1.80, rate=0.00226, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src53.arf
[Mon Dec  5 06:51:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:30 2011] Updating source flux to 6.8e-14
[Mon Dec  5 06:58:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting