[Fri Dec 2 20:31:32 2011] Detection parameters: Position = (475.4, 355.1) = 14 44 34.75 -62 15 12.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 298.0 +/- 32.3 Background counts = 219.4 Rate = 0.003 +/- 0.0003 [Fri Dec 2 20:31:34 2011] Off-axis axis estimate = 13.47' [Sat Dec 3 12:28:30 2011] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting [Sat Dec 3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 13.16" [Sat Dec 3 12:28:30 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.985 [Sat Dec 3 12:28:30 2011] Giving source the simple spatial ID 66 for pass 0, mean size = 13.16" [Sat Dec 3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src66.ximg exists [Sat Dec 3 16:57:14 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src66.csv [Sat Dec 3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src66_1.ximg exists [Sat Dec 3 16:57:14 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src66.csv [Sat Dec 3 16:57:14 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src66_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists [Sat Dec 3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists [Sat Dec 3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly [Sat Dec 3 16:57:55 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 11.728101 pixels away [Sat Dec 3 16:57:55 2011] Warning, spatial fit 66 centroid is now closest to src. 31 [Sat Dec 3 16:57:55 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 16:57:55 2011] Assessing source extent using major [Sat Dec 3 16:57:55 2011] Source does appear to be extended [Sat Dec 3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 3 16:57:55 2011] Source is confused with source 30 [Sun Dec 4 08:08:37 2011] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting [Sun Dec 4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 13.16" [Sun Dec 4 08:08:37 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.985 [Sun Dec 4 08:08:37 2011] Giving source the simple spatial ID 64 for pass 1, mean size = 13.16" [Sun Dec 4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src64.ximg exists [Sun Dec 4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src64.csv [Sun Dec 4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src64_1.ximg exists [Sun Dec 4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src64.csv [Sun Dec 4 15:56:19 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src64_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Dec 4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists [Sun Dec 4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists [Sun Dec 4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly [Sun Dec 4 15:56:59 2011] Spatial fit model total counts = 4164.800000, observed total counts = 4154.000000 [Sun Dec 4 15:56:59 2011] Offset between fit and detection position for source 51 = 4.229790 pixels [Sun Dec 4 15:56:59 2011] 3755.087000 total counts/ 2875.900000 bgd. counts: snr = 16.394356 Spatial fit parameters: Offset between fit and detection position for source 51 = 4.229790 pixels Position = (471.3, 354.0) = 14 44 37.29 -62 15 19.1 Extent = 16.7 (13.3-20.4)", rotation angle = 0 Source counts = 879.2 +/- 61.3 Background counts = 2875.9 Rate = 0.008 +/- 0.0005 [Sun Dec 4 15:57:00 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 15:57:00 2011] Assessing source extent using major axis lower bound [Sun Dec 4 15:57:00 2011] Source does appear to be extended [Sun Dec 4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Dec 5 01:14:14 2011] XMMSAS src. selection expression = ellipse(40955.022000, 30750.952800, 1001.754029, 1001.754029, 0.000000, X, Y) [Mon Dec 5 01:14:14 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src51_src.reg [Mon Dec 5 01:14:14 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (414, 296) - (529, 412) [Mon Dec 5 01:14:14 2011] XMMSAS bgd. selection expression = annulus(40955.022000, 30750.952800, 1669.590048, 3339.180096, X, Y) && !ellipse(37765.644800, 28873.756000, 1499.464043, 1499.464043, 0.000000, X, Y) && !ellipse(38216.968000, 30395.452000, 1775.184051, 1775.184051, 0.000000, X, Y) && !ellipse(37638.830000, 28417.852000, 749.748822, 749.748822, 0.000000, X, Y) && !ellipse(37167.639800, 27448.350100, 1123.200032, 1123.200032, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(35974.584000, 25569.236000, 2263.744065, 1095.872032, 126.018000, X, Y) && !ellipse(38813.746000, 31777.278000, 953.056027, 953.056027, 0.000000, X, Y) && !ellipse(36631.928000, 26520.456000, 1689.160049, 1689.160049, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(39074.859436, 29669.986328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40855.961080, 32358.820000, 2110.976061, 2110.976061, 0.000000, X, Y) && !ellipse(40294.814000, 31973.346000, 2113.008061, 2113.008061, 0.000000, X, Y) && !ellipse(41791.720000, 31490.573600, 668.841619, 668.841619, 0.000000, X, Y) && !ellipse(43035.005800, 31898.890000, 1365.656039, 1365.656039, 0.000000, X, Y) && !ellipse(37322.784000, 30058.866000, 1816.272052, 1816.272052, 0.000000, X, Y) && !ellipse(37515.639600, 31151.260000, 1893.480054, 1893.480054, 0.000000, X, Y) && !ellipse(42464.054779, 31856.474640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41695.344147, 33204.305573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41114.404000, 32864.360000, 2113.008061, 2113.008061, 0.000000, X, Y) [Mon Dec 5 01:14:14 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src51.gif [Mon Dec 5 02:38:47 2011] Mean detx,y = (-14305.38, 1189.57) [Mon Dec 5 02:38:47 2011] Setting backscal keywords in source and bgd. spectrum [Mon Dec 5 02:39:02 2011] Binned source spectrum to 10 counts/bin [Mon Dec 5 02:39:02 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src51_src_b10.pi.gz [Mon Dec 5 02:39:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src51_bgd.pi.gz [Mon Dec 5 06:51:28 2011] Updating aperture counts using extracted products [Mon Dec 5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src51_src_b10.pi.gz [Mon Dec 5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 06:51:29 2011] Using photon index=1.80, rate=0.00769, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src51.arf [Mon Dec 5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 06:51:29 2011] Updating source flux to 1.7e-13 [Mon Dec 5 06:58:25 2011] Flag c found in src. 51 procflags, skipping spectral fitting