[Fri Dec  2 20:31:31 2011] Detection parameters:
  Position = (469.4, 374.1) = 14 44 38.55 -62 13 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 539.0 +/- 37.6
  Background counts = 170.0
  Rate = 0.005 +/- 0.0003

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 13.56'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 13.21"
[Sat Dec  3 12:28:30 2011] source mask rpix=3.0, npix_max = 50, mask sum = 48, frac = 0.960
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 13.21"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src45.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src45.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src45.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Dec  3 16:57:55 2011] Warning, spatial fit 45 centroid is now closest to src. 30
[Sat Dec  3 16:57:55 2011] Source 42 is offset by 1.290168 and -1.790198 pixels which is larger than
2 X fitted extent = 1.545425 x 1.545425, not incorporating fit results
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:55 2011] Source is confused with source 30
[Sun Dec  4 08:08:37 2011] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 13.21"
[Sun Dec  4 08:08:37 2011] source mask rpix=3.0, npix_max = 50, mask sum = 48, frac = 0.960
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 13.21"
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src45.ximg exists
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src45_1.ximg exists
[Sun Dec  4 15:56:18 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src45 appears to have run properly
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sun Dec  4 15:56:59 2011] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 12.440504 pixels away
[Sun Dec  4 15:56:59 2011] Warning, spatial fit 45 centroid is now closest to src. 58
[Sun Dec  4 15:57:00 2011] Spatial fit model total counts = 3311.700000, observed total counts = 3312.000000
[Sun Dec  4 15:57:00 2011] Offset between fit and detection position for source 42 = 1.740164 pixels
[Sun Dec  4 15:57:00 2011] Warning, changing simple spatial fit ID from 45 to 90
[Sun Dec  4 15:57:00 2011] 3137.151000 total counts/ 2155.360000 bgd. counts: snr = 21.147505
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 1.740164 pixels
  Position = (470.2, 372.5) = 14 44 38.08 -62 13 58.8
  Extent = 26.4 (25.7-26.7)", rotation angle = 0
  Source counts = 981.8 +/- 56.0
  Background counts = 2155.4
  Rate = 0.009 +/- 0.0005
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:12 2011] XMMSAS src. selection expression = ellipse(40855.961080, 32358.820000, 1583.232046, 1583.232046, 0.000000, X, Y)
[Mon Dec  5 01:14:12 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src42_src.reg
[Mon Dec  5 01:14:12 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (379, 282) - (561, 463)
[Mon Dec  5 01:14:13 2011] XMMSAS bgd. selection expression = annulus(40855.961080, 32358.820000, 2638.720076, 5277.440152, X, Y) && !ellipse(37765.644800, 28873.756000, 1499.464043, 1499.464043, 0.000000, X, Y) && !ellipse(38216.968000, 30395.452000, 1775.184051, 1775.184051, 0.000000, X, Y) && !ellipse(37638.830000, 28417.852000, 749.748822, 749.748822, 0.000000, X, Y) && !ellipse(35379.105700, 26927.698000, 904.880026, 904.880026, 0.000000, X, Y) && !ellipse(37167.639800, 27448.350100, 1123.200032, 1123.200032, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(35386.714600, 27009.495722, 1329.064038, 724.055221, 101.824000, X, Y) && !ellipse(35974.584000, 25569.236000, 2263.744065, 1095.872032, 126.018000, X, Y) && !ellipse(38813.746000, 31777.278000, 953.056027, 953.056027, 0.000000, X, Y) && !ellipse(36664.947754, 27357.208893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35551.494843, 26226.747864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36631.928000, 26520.456000, 1689.160049, 1689.160049, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(39074.859436, 29669.986328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40294.814000, 31973.346000, 2113.008061, 2113.008061, 0.000000, X, Y) && !ellipse(41791.720000, 31490.573600, 668.841619, 668.841619, 0.000000, X, Y) && !ellipse(43035.005800, 31898.890000, 1365.656039, 1365.656039, 0.000000, X, Y) && !ellipse(40955.022000, 30750.952800, 1335.672038, 1335.672038, 0.000000, X, Y) && !ellipse(37322.784000, 30058.866000, 1816.272052, 1816.272052, 0.000000, X, Y) && !ellipse(37515.639600, 31151.260000, 1893.480054, 1893.480054, 0.000000, X, Y) && !ellipse(36619.629059, 30918.166046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42464.054779, 31856.474640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41695.344147, 33204.305573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41114.404000, 32864.360000, 2113.008061, 2113.008061, 0.000000, X, Y)
[Mon Dec  5 01:14:13 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src42.gif
[Mon Dec  5 02:21:27 2011] Mean detx,y = (-14412.96, 2456.48) 
[Mon Dec  5 02:21:28 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:21:42 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:21:43 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Dec  5 02:21:43 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.00859, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src42.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 1.7e-13
[Mon Dec  5 06:58:25 2011] Flag b found in src. 42 procflags, skipping spectral fitting
[Mon Dec  5 06:58:25 2011] Flag c found in src. 42 procflags, skipping spectral fitting