[Fri Dec  2 20:31:31 2011] Detection parameters:
  Position = (371.9, 146.1) = 14 45 38.83 -62 30 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1254.1 +/- 49.3
  Background counts = 142.1
  Rate = 0.01 +/- 0.0004

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 12.26'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.9, npix_max = 45, mask sum = 34, frac = 0.741
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 12.56"
[Sat Dec  3 16:57:13 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src25.ximg exists
[Sat Dec  3 16:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src25.csv
[Sat Dec  3 16:57:13 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Dec  3 16:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src25.csv
[Sat Dec  3 16:57:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Dec  3 16:57:55 2011] Spatial fit model total counts = 6291.960000, observed total counts = 6552.000000
[Sat Dec  3 16:57:55 2011] Offset between fit and detection position for source 26 = 4.569757 pixels
[Sat Dec  3 16:57:55 2011] Warning, changing simple spatial fit ID from 25 to 19
[Sat Dec  3 16:57:55 2011] 4812.250000 total counts/ 3178.650000 bgd. counts: snr = 28.975062
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 4.569757 pixels
  Position = (374.1, 150.1) = 14 45 37.44 -62 30 8.3
  Extent = 23.3" x 10.1", rotation angle = 283
  Source counts = 1633.6 +/- 69.4
  Background counts = 3178.7
  Rate = 0.01 +/- 0.0006
[Sat Dec  3 16:57:55 2011] Spatial fit model total counts = 5863.000000, observed total counts = 5881.000000
[Sat Dec  3 16:57:55 2011] Offset between fit and detection position for source 26 = 1.888261 pixels
[Sat Dec  3 16:57:55 2011] Warning, changing simple spatial fit ID from 19 to 25
[Sat Dec  3 16:57:55 2011] 5527.790000 total counts/ 1250.160000 bgd. counts: snr = 120.981905
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.888261 pixels
  Position = (373.9, 152.0) = 14 45 37.59 -62 30 0.1
  Extent = 24.9 (24.4-25.1)", rotation angle = 0
  Source counts = 4277.6 +/- 74.3
  Background counts = 1250.2
  Rate = 0.04 +/- 0.0007
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:55 2011] Source is confused with source 4
[Sun Dec  4 08:08:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 24.88"
[Sun Dec  4 08:08:37 2011] source mask rpix=5.7, npix_max = 154, mask sum = 144, frac = 0.931
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 24.88"
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src25.ximg exists
[Sun Dec  4 15:56:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src25.csv
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Dec  4 15:56:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src25.csv
[Sun Dec  4 15:56:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Dec  4 15:56:19 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Dec  4 15:56:59 2011] Warning, spatial fit 25 centroid is now closest to src. 119
[Sun Dec  4 15:56:59 2011] Spatial fit model total counts = 10651.400000, observed total counts = 10775.000000
[Sun Dec  4 15:56:59 2011] Offset between fit and detection position for source 26 = 4.579586 pixels
[Sun Dec  4 15:56:59 2011] Warning, changing simple spatial fit ID from 25 to 34
[Sun Dec  4 15:56:59 2011] 7816.880000 total counts/ 6019.170000 bgd. counts: snr = 23.171350
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 4.579586 pixels
  Position = (372.5, 147.6) = 14 45 38.47 -62 30 19.1
  Extent = 15.9 (15.2-16.7)", rotation angle = 0
  Source counts = 1797.7 +/- 88.4
  Background counts = 6019.2
  Rate = 0.02 +/- 0.0008
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:11 2011] Counts = 1797.710000, rescaling region sizes by 2.000000
[Mon Dec  5 01:14:11 2011] XMMSAS src. selection expression = ellipse(32357.170000, 12793.798000, 1905.828055, 1905.828055, 0.000000, X, Y)
[Mon Dec  5 01:14:11 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src26_src.reg
[Mon Dec  5 01:14:11 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (263, 38) - (482, 257)
[Mon Dec  5 01:14:11 2011] XMMSAS bgd. selection expression = annulus(32357.170000, 12793.798000, 6352.760183, 12705.520366, X, Y) && !ellipse(34202.988200, 18883.761600, 1838.952053, 1838.952053, 0.000000, X, Y) && !ellipse(33726.950745, 16651.789597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36203.628448, 19956.939987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34870.818000, 21247.910000, 1696.488049, 1696.488049, 0.000000, X, Y) && !ellipse(32812.780800, 14990.376000, 1864.744054, 1864.744054, 0.000000, X, Y) && !ellipse(35484.178000, 22419.350000, 1743.192050, 1743.192050, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(36179.573989, 20205.795442, 1821.176052, 609.439160, 73.004308, X, Y) && !ellipse(35212.354000, 22692.476000, 1635.512047, 1635.512047, 0.000000, X, Y) && !ellipse(35525.072600, 25127.138000, 937.672027, 937.672027, 0.000000, X, Y) && !ellipse(32564.370600, 14110.254000, 469.161613, 469.161613, 0.000000, X, Y) && !ellipse(32599.148000, 13423.480000, 855.456025, 855.456025, 0.000000, X, Y) && !ellipse(33010.966339, 15519.751480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35546.554600, 24375.670000, 1677.360048, 1677.360048, 0.000000, X, Y) && !ellipse(35974.584000, 25569.236000, 2263.744065, 1095.872032, 126.018000, X, Y) && !ellipse(35137.860000, 23485.308000, 3354.720097, 3354.720097, 0.000000, X, Y) && !ellipse(35551.494843, 26226.747864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32697.630000, 18056.844000, 893.888026, 893.888026, 0.000000, X, Y) && !ellipse(31882.045227, 11169.751480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33705.490143, 17798.957397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32487.471558, 16223.038208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36631.928000, 26520.456000, 1689.160049, 1689.160049, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(31848.334000, 11492.212000, 1818.504052, 1818.504052, 0.000000, X, Y) && !ellipse(31627.332000, 15913.686000, 1847.808053, 1847.808053, 0.000000, X, Y) && !ellipse(32159.098600, 12242.426000, 2010.056058, 1301.016037, 117.579000, X, Y) && !ellipse(34688.642000, 12865.886000, 2091.968060, 2091.968060, 0.000000, X, Y) && !ellipse(32467.519012, 17618.128662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36344.280031, 17568.346769, 1792.986467, 863.572655, 86.437930, X, Y) && !ellipse(33022.934200, 19356.828040, 1261.424036, 1261.424036, 0.000000, X, Y) && !ellipse(24110.560220, 19841.561800, 546.085616, 546.085616, 0.000000, X, Y) && !ellipse(32448.585999, 26031.839508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33105.164000, 20260.354000, 1643.672047, 1643.672047, 0.000000, X, Y) && !ellipse(36860.520000, 24041.950000, 1721.208050, 1721.208050, 0.000000, X, Y) && !ellipse(33618.155609, 20836.464905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33804.785600, 21342.094800, 1631.256047, 1631.256047, 0.000000, X, Y) && !ellipse(34098.216800, 22495.243800, 1617.424047, 856.816025, 332.626000, X, Y) && !ellipse(28704.997345, 14821.632767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36652.619600, 15462.603000, 1637.280047, 1036.648030, 244.400000, X, Y) && !ellipse(37441.568000, 17140.208000, 2041.208059, 2041.208059, 0.000000, X, Y) && !ellipse(30863.997600, 22398.989800, 312.716809, 312.716809, 0.000000, X, Y) && !ellipse(33087.577209, 12675.129196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34114.722000, 12738.739888, 2001.176058, 2001.176058, 0.000000, X, Y) && !ellipse(31023.349780, 23730.058800, 341.989610, 341.989610, 0.000000, X, Y) && !ellipse(24011.221497, 16187.341339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29169.203660, 25565.474800, 417.106412, 417.106412, 0.000000, X, Y) && !ellipse(30927.209800, 13080.938440, 594.123217, 594.123217, 0.000000, X, Y) && !ellipse(31086.812440, 13897.953400, 709.510420, 709.510420, 0.000000, X, Y) && !ellipse(39916.708200, 24776.618200, 376.192011, 376.192011, 0.000000, X, Y) && !ellipse(36666.364000, 15393.012000, 1959.248056, 1959.248056, 0.000000, X, Y) && !ellipse(37952.761749, 16651.189560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37600.080933, 25555.585663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28782.383000, 10636.547020, 530.669927, 530.669927, 0.000000, X, Y) && !ellipse(30925.673200, 12866.792000, 1072.272031, 1072.272031, 0.000000, X, Y) && !ellipse(37447.818000, 14330.730000, 2095.168060, 2095.168060, 0.000000, X, Y) && !ellipse(35312.589996, 13026.498428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.000000, 24579.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31326.780365, 14475.181976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30997.487400, 20970.264000, 1505.544043, 1505.544043, 0.000000, X, Y) && !ellipse(37018.751648, 13973.495605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35676.222809, 17252.269608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31041.181519, 12025.705048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23963.730988, 22203.767822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29618.138916, 23296.495575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43546.804932, 24564.471191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33909.791992, 11388.532532, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec  5 01:14:11 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src26.gif
[Mon Dec  5 01:57:29 2011] Mean detx,y = (-3370.77, -15333.43) 
[Mon Dec  5 01:57:30 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 01:59:11 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 01:59:11 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Dec  5 01:59:11 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.0157, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src26.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 3.2e-13
[Mon Dec  5 06:58:25 2011] Flag c found in src. 26 procflags, skipping spectral fitting