[Fri Dec  2 20:31:30 2011] Detection parameters:
  Position = (405.0, 258.6) = 14 45 18.35 -62 22 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1219.4 +/- 47.0
  Background counts = 167.4
  Rate = 0.02 +/- 0.0007

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 8.25'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 10.55"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.4, npix_max = 34, mask sum = 32, frac = 0.935
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 10.55"
[Sat Dec  3 16:57:13 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Dec  3 16:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src11.csv
[Sat Dec  3 16:57:13 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Dec  3 16:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src11.csv
[Sat Dec  3 16:57:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Dec  3 16:57:55 2011] Spatial fit model total counts = 6974.290000, observed total counts = 6945.000000
[Sat Dec  3 16:57:55 2011] Offset between fit and detection position for source 17 = 3.558053 pixels
[Sat Dec  3 16:57:55 2011] Warning, changing simple spatial fit ID from 11 to 7
[Sat Dec  3 16:57:55 2011] 6710.957000 total counts/ 6420.410000 bgd. counts: snr = 3.626060
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 3.558053 pixels
  Position = (401.5, 257.9) = 14 45 20.53 -62 22 18.9
  Extent = 17.2" x 3.2", rotation angle = 0
  Source counts = 290.5 +/- 81.9
  Background counts = 6420.4
  Rate = 0.003 +/- 0.0007
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 5.35
[Sat Dec  3 16:57:55 2011] Source is asymmetric
[Sat Dec  3 16:57:55 2011] Source is confused with source 19
[Sun Dec  4 08:08:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 10.22"
[Sun Dec  4 08:08:37 2011] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.739
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 10.22"
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src11.ximg exists
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Dec  4 15:56:18 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src11 appears to have run properly
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Dec  4 15:56:19 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Dec  4 15:56:59 2011] Warning, spatial fit 11 centroid is now closest to src. 16
[Sun Dec  4 15:56:59 2011] Spatial fit model total counts = 12070.800000, observed total counts = 12077.000000
[Sun Dec  4 15:56:59 2011] Offset between fit and detection position for source 17 = 6.935310 pixels
[Sun Dec  4 15:56:59 2011] Warning, changing simple spatial fit ID from 11 to 49
[Sun Dec  4 15:56:59 2011] 10074.627000 total counts/ 9637.180000 bgd. counts: snr = 4.456054
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 6.935310 pixels
  Position = (408.4, 258.3) = 14 45 16.20 -62 22 17.2
  Extent = 21.8 (14.4-25.8)", rotation angle = 0
  Source counts = 437.4 +/- 100.4
  Background counts = 9637.2
  Rate = 0.004 +/- 0.0009
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:10 2011] XMMSAS src. selection expression = ellipse(35484.178000, 22419.350000, 1307.394038, 1307.394038, 0.000000, X, Y)
[Mon Dec  5 01:14:10 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src17_src.reg
[Mon Dec  5 01:14:10 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (333, 183) - (484, 333)
[Mon Dec  5 01:14:10 2011] XMMSAS bgd. selection expression = annulus(35484.178000, 22419.350000, 2178.990063, 4357.980125, X, Y) && !ellipse(34202.988200, 18883.761600, 1838.952053, 1838.952053, 0.000000, X, Y) && !ellipse(36203.628448, 19956.939987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34870.818000, 21247.910000, 1696.488049, 1696.488049, 0.000000, X, Y) && !ellipse(35379.105700, 26927.698000, 904.880026, 904.880026, 0.000000, X, Y) && !ellipse(37167.639800, 27448.350100, 1123.200032, 1123.200032, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(36179.573989, 20205.795442, 1821.176052, 609.439160, 73.004308, X, Y) && !ellipse(35386.714600, 27009.495722, 1329.064038, 724.055221, 101.824000, X, Y) && !ellipse(35212.354000, 22692.476000, 1635.512047, 1635.512047, 0.000000, X, Y) && !ellipse(35525.072600, 25127.138000, 937.672027, 937.672027, 0.000000, X, Y) && !ellipse(35546.554600, 24375.670000, 1677.360048, 1677.360048, 0.000000, X, Y) && !ellipse(35974.584000, 25569.236000, 2263.744065, 1095.872032, 126.018000, X, Y) && !ellipse(35137.860000, 23485.308000, 3354.720097, 3354.720097, 0.000000, X, Y) && !ellipse(36664.947754, 27357.208893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35551.494843, 26226.747864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32697.630000, 18056.844000, 893.888026, 893.888026, 0.000000, X, Y) && !ellipse(33705.490143, 17798.957397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36631.928000, 26520.456000, 1689.160049, 1689.160049, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(32467.519012, 17618.128662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36344.280031, 17568.346769, 1792.986467, 863.572655, 86.437930, X, Y) && !ellipse(33022.934200, 19356.828040, 1261.424036, 1261.424036, 0.000000, X, Y) && !ellipse(32448.585999, 26031.839508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33797.832062, 26902.128906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33105.164000, 20260.354000, 1643.672047, 1643.672047, 0.000000, X, Y) && !ellipse(36860.520000, 24041.950000, 1721.208050, 1721.208050, 0.000000, X, Y) && !ellipse(33618.155609, 20836.464905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33804.785600, 21342.094800, 1631.256047, 1631.256047, 0.000000, X, Y) && !ellipse(34098.216800, 22495.243800, 1617.424047, 856.816025, 332.626000, X, Y) && !ellipse(37441.568000, 17140.208000, 2041.208059, 2041.208059, 0.000000, X, Y) && !ellipse(30863.997600, 22398.989800, 312.716809, 312.716809, 0.000000, X, Y) && !ellipse(31023.349780, 23730.058800, 341.989610, 341.989610, 0.000000, X, Y) && !ellipse(39916.708200, 24776.618200, 376.192011, 376.192011, 0.000000, X, Y) && !ellipse(37600.080933, 25555.585663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.000000, 24579.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30997.487400, 20970.264000, 1505.544043, 1505.544043, 0.000000, X, Y) && !ellipse(35676.222809, 17252.269608, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec  5 01:14:10 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src17.gif
[Mon Dec  5 01:30:44 2011] Mean detx,y = (-7684.15, -6443.87) 
[Mon Dec  5 01:30:45 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 01:31:13 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 01:31:13 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Dec  5 01:31:13 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Dec  5 06:51:27 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:27 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.00383, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src17.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 7.2e-14
[Mon Dec  5 06:58:25 2011] Flag c found in src. 17 procflags, skipping spectral fitting