[Fri Dec  2 20:31:34 2011] Detection parameters:
  Position = (331.0, 122.6) = 14 46 4.50 -62 32 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.1 +/- 20.4
  Background counts = 63.5
  Rate = 0.002 +/- 0.0002

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 12.97'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 12.91"
[Sat Dec  3 12:28:30 2011] source mask rpix=3.0, npix_max = 48, mask sum = 33, frac = 0.686
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 83 for pass 0, mean size = 12.91"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src83.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src83.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src83_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src83.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:16 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Sat Dec  3 16:57:16 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Sat Dec  3 16:57:16 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Sat Dec  3 16:57:55 2011] Warning: source 83 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 124 at 15.689009 pixels away
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 08:08:37 2011] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 12.91"
[Sun Dec  4 08:08:37 2011] source mask rpix=3.0, npix_max = 48, mask sum = 33, frac = 0.686
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 81 for pass 1, mean size = 12.91"
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src81.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src81.csv
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src81_1.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src81.csv
[Sun Dec  4 15:56:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly
[Sun Dec  4 15:56:59 2011] Spatial fit model total counts = 582.630000, observed total counts = 646.000000
[Sun Dec  4 15:56:59 2011] Offset between fit and detection position for source 124 = 0.450777 pixels
[Sun Dec  4 15:56:59 2011] 613.942000 total counts/ 428.839000 bgd. counts: snr = 8.938534
Spatial fit parameters:
  Offset between fit and detection position for source 124 = 0.450777 pixels
  Position = (331.4, 122.8) = 14 46 4.26 -62 32 7.3
  Extent = 6.6 (5.8-7.6)", rotation angle = 0
  Source counts = 185.1 +/- 24.8
  Background counts = 428.8
  Rate = 0.002 +/- 0.0002
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:14 2011] XMMSAS src. selection expression = ellipse(28782.383000, 10636.547020, 398.002445, 398.002445, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src124_src.reg
[Mon Dec  5 01:14:14 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (309, 100) - (354, 146)
[Mon Dec  5 01:14:14 2011] XMMSAS bgd. selection expression = annulus(28782.383000, 10636.547020, 663.337409, 1326.674818, X, Y) && !ellipse(31848.334000, 11492.212000, 1818.504052, 1818.504052, 0.000000, X, Y) && !ellipse(30925.673200, 12866.792000, 1072.272031, 1072.272031, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src124.gif
[Mon Dec  5 02:44:55 2011] Mean detx,y = (478.25, -17124.12) 
[Mon Dec  5 02:44:56 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:45:05 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:45:05 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src124_src_b10.pi.gz
[Mon Dec  5 02:45:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src124_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src124_src_b10.pi.gz
[Mon Dec  5 06:51:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:30 2011] Using photon index=1.80, rate=0.00162, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src124.arf
[Mon Dec  5 06:51:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:30 2011] Updating source flux to 6.3e-14