[Fri Dec  2 20:31:34 2011] Detection parameters:
  Position = (356.4, 151.0) = 14 45 48.55 -62 30 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.4 +/- 28.0
  Background counts = 128.5
  Rate = 0.002 +/- 0.0002

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 11.48'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 12.17"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 72 for pass 0, mean size = 12.17"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src72.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src72.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src72_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src72.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Sat Dec  3 16:57:16 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Sat Dec  3 16:57:55 2011] Spatial fit model total counts = 2444.720000, observed total counts = 2439.000000
[Sat Dec  3 16:57:55 2011] Offset between fit and detection position for source 118 = 0.464761 pixels
[Sat Dec  3 16:57:55 2011] 2470.214000 total counts/ 2336.160000 bgd. counts: snr = 2.773502
Spatial fit parameters:
  Offset between fit and detection position for source 118 = 0.464761 pixels
  Position = (356.0, 150.8) = 14 45 48.81 -62 30 5.4
  Extent = 7.5 (5.7-11.1)", rotation angle = 0
  Source counts = 134.1 +/- 49.7
  Background counts = 2336.2
  Rate = 0.001 +/- 0.0004
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:55 2011] Source is confused with source 27
[Sun Dec  4 08:08:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 7.47"
[Sun Dec  4 08:08:37 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 70 for pass 1, mean size = 7.47"
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src70.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src70.csv
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src70_1.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src70.csv
[Sun Dec  4 15:56:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Sun Dec  4 15:56:59 2011] Spatial fit model total counts = 2044.380000, observed total counts = 2040.000000
[Sun Dec  4 15:56:59 2011] Offset between fit and detection position for source 118 = 0.110960 pixels
[Sun Dec  4 15:56:59 2011] 2107.864000 total counts/ 1970.190000 bgd. counts: snr = 3.101686
Spatial fit parameters:
  Offset between fit and detection position for source 118 = 0.110960 pixels
  Position = (356.0, 150.9) = 14 45 48.80 -62 30 4.9
  Extent = 7.4 (5.8-11.1)", rotation angle = 0
  Source counts = 137.7 +/- 45.9
  Background counts = 1970.2
  Rate = 0.001 +/- 0.0004
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:14 2011] XMMSAS src. selection expression = ellipse(30927.209800, 13080.938440, 445.592413, 445.592413, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src118_src.reg
[Mon Dec  5 01:14:14 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (330, 125) - (382, 177)
[Mon Dec  5 01:14:14 2011] XMMSAS bgd. selection expression = annulus(30927.209800, 13080.938440, 742.654021, 1485.308043, X, Y) && !ellipse(32812.780800, 14990.376000, 1864.744054, 1864.744054, 0.000000, X, Y) && !ellipse(32564.370600, 14110.254000, 469.161613, 469.161613, 0.000000, X, Y) && !ellipse(32599.148000, 13423.480000, 855.456025, 855.456025, 0.000000, X, Y) && !ellipse(32357.170000, 12793.798000, 1270.552037, 1270.552037, 0.000000, X, Y) && !ellipse(31882.045227, 11169.751480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31848.334000, 11492.212000, 1818.504052, 1818.504052, 0.000000, X, Y) && !ellipse(31627.332000, 15913.686000, 1847.808053, 1847.808053, 0.000000, X, Y) && !ellipse(32159.098600, 12242.426000, 2010.056058, 1301.016037, 117.579000, X, Y) && !ellipse(28704.997345, 14821.632767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33087.577209, 12675.129196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34114.722000, 12738.739888, 2001.176058, 2001.176058, 0.000000, X, Y) && !ellipse(31086.812440, 13897.953400, 709.510420, 709.510420, 0.000000, X, Y) && !ellipse(30925.673200, 12866.792000, 1072.272031, 1072.272031, 0.000000, X, Y) && !ellipse(31326.780365, 14475.181976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31041.181519, 12025.705048, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec  5 01:14:14 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src118.gif
[Mon Dec  5 02:40:30 2011] Mean detx,y = (-2021.20, -15062.40) 
[Mon Dec  5 02:40:31 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:40:36 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:40:36 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src118_src_b10.pi.gz
[Mon Dec  5 02:40:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src118_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src118_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.0012, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src118.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:30 2011] Updating source flux to 3.1e-14
[Mon Dec  5 06:58:25 2011] Flag c found in src. 118 procflags, skipping spectral fitting