[Fri Dec  2 20:31:34 2011] Detection parameters:
  Position = (360.6, 166.9) = 14 45 45.94 -62 28 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.0 +/- 25.5
  Background counts = 153.9
  Rate = 0.001 +/- 0.0002

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 10.55'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 11.70"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.032
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 93 for pass 0, mean size = 11.70"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src93.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src93.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src93_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src93.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:16 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Sat Dec  3 16:57:16 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Sat Dec  3 16:57:16 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Sat Dec  3 16:57:55 2011] Source 115 is offset by -1.145290 and -7.242920 pixels which is larger than
2 X fitted extent = 2.568469 x 2.568469, not incorporating fit results
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:55 2011] Source is confused with source 116
[Sun Dec  4 08:08:37 2011] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 11.70"
[Sun Dec  4 08:08:37 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.032
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 91 for pass 1, mean size = 11.70"
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src91.ximg exists
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src91_1.ximg exists
[Sun Dec  4 15:56:19 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src91 appears to have run properly
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src91 appears to have run properly
[Sun Dec  4 15:56:59 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 115 at 13.910939 pixels away
[Sun Dec  4 15:57:00 2011] Source 115 is offset by 2.480418 and 5.749126 pixels which is larger than
2 X fitted extent = 3.476589 x 3.476589, not incorporating fit results
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:15 2011] XMMSAS src. selection expression = ellipse(31326.780365, 14475.181976, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec  5 01:14:15 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src115_src.reg
[Mon Dec  5 01:14:15 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (323, 129) - (398, 204)
[Mon Dec  5 01:14:15 2011] XMMSAS bgd. selection expression = annulus(31326.780365, 14475.181976, 1087.500000, 2175.000000, X, Y) && !ellipse(33726.950745, 16651.789597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32812.780800, 14990.376000, 1864.744054, 1864.744054, 0.000000, X, Y) && !ellipse(32564.370600, 14110.254000, 469.161613, 469.161613, 0.000000, X, Y) && !ellipse(32599.148000, 13423.480000, 855.456025, 855.456025, 0.000000, X, Y) && !ellipse(33010.966339, 15519.751480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.170000, 12793.798000, 1270.552037, 1270.552037, 0.000000, X, Y) && !ellipse(32487.471558, 16223.038208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31848.334000, 11492.212000, 1818.504052, 1818.504052, 0.000000, X, Y) && !ellipse(31627.332000, 15913.686000, 1847.808053, 1847.808053, 0.000000, X, Y) && !ellipse(32159.098600, 12242.426000, 2010.056058, 1301.016037, 117.579000, X, Y) && !ellipse(34688.642000, 12865.886000, 2091.968060, 2091.968060, 0.000000, X, Y) && !ellipse(28704.997345, 14821.632767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33087.577209, 12675.129196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34114.722000, 12738.739888, 2001.176058, 2001.176058, 0.000000, X, Y) && !ellipse(30927.209800, 13080.938440, 594.123217, 594.123217, 0.000000, X, Y) && !ellipse(31086.812440, 13897.953400, 709.510420, 709.510420, 0.000000, X, Y) && !ellipse(30925.673200, 12866.792000, 1072.272031, 1072.272031, 0.000000, X, Y) && !ellipse(31041.181519, 12025.705048, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec  5 01:14:15 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src115.gif
[Mon Dec  5 02:53:07 2011] Mean detx,y = (-2644.07, -13753.79) 
[Mon Dec  5 02:53:08 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:53:14 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:53:14 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src115_src_b10.pi.gz
[Mon Dec  5 02:53:14 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src115_bgd.pi.gz
[Mon Dec  5 06:42:56 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec  5 06:42:56 2011] rmf not generated due to insufficient counts
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src115_src_b10.pi.gz
[Mon Dec  5 06:51:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:30 2011] Using photon index=1.80, rate=0.00148, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src115.arf
[Mon Dec  5 06:51:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:30 2011] Updating source flux to 3.2e-14
[Mon Dec  5 06:58:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting