[Fri Dec  2 20:31:33 2011] Detection parameters:
  Position = (379.0, 220.0) = 14 45 34.54 -62 25 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 409.1 +/- 34.1
  Background counts = 189.0
  Rate = 0.005 +/- 0.0005

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 8.15'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 10.50"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.060
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 40 for pass 0, mean size = 10.50"
[Sat Dec  3 16:57:13 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src40.ximg exists
[Sat Dec  3 16:57:13 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src40_1.ximg exists
[Sat Dec  3 16:57:13 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src40 appears to have run properly
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Sat Dec  3 16:57:55 2011] Spatial fit model total counts = 3782.880000, observed total counts = 3775.000000
[Sat Dec  3 16:57:55 2011] Offset between fit and detection position for source 108 = 2.298990 pixels
[Sat Dec  3 16:57:55 2011] 3847.983000 total counts/ 3621.390000 bgd. counts: snr = 3.765380
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 2.298990 pixels
  Position = (378.4, 222.2) = 14 45 34.92 -62 24 54.4
  Extent = 9.1 (6.9-12.4)", rotation angle = 0
  Source counts = 226.6 +/- 62.0
  Background counts = 3621.4
  Rate = 0.002 +/- 0.0005
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:55 2011] Source is confused with source 106
[Sun Dec  4 08:08:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 9.13"
[Sun Dec  4 08:08:37 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.926
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 40 for pass 1, mean size = 9.13"
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src40.ximg exists
[Sun Dec  4 15:56:18 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src40.csv
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src40_1.ximg exists
[Sun Dec  4 15:56:18 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src40.csv
[Sun Dec  4 15:56:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Sun Dec  4 15:56:59 2011] Spatial fit model total counts = 3173.880000, observed total counts = 3179.000000
[Sun Dec  4 15:56:59 2011] Offset between fit and detection position for source 108 = 1.930900 pixels
[Sun Dec  4 15:56:59 2011] 2599.100000 total counts/ 1764.030000 bgd. counts: snr = 19.882450
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 1.930900 pixels
  Position = (380.1, 223.0) = 14 45 33.82 -62 24 50.8
  Extent = 15.8 (12.1-18.3)", rotation angle = 0
  Source counts = 835.1 +/- 51.0
  Background counts = 1764.0
  Rate = 0.007 +/- 0.0004
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:12 2011] XMMSAS src. selection expression = ellipse(33022.934200, 19356.828040, 946.068027, 946.068027, 0.000000, X, Y)
[Mon Dec  5 01:14:12 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src108_src.reg
[Mon Dec  5 01:14:12 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (326, 169) - (435, 277)
[Mon Dec  5 01:14:12 2011] XMMSAS bgd. selection expression = annulus(33022.934200, 19356.828040, 1576.780045, 3153.560091, X, Y) && !ellipse(34202.988200, 18883.761600, 1838.952053, 1838.952053, 0.000000, X, Y) && !ellipse(33726.950745, 16651.789597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36203.628448, 19956.939987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34870.818000, 21247.910000, 1696.488049, 1696.488049, 0.000000, X, Y) && !ellipse(32812.780800, 14990.376000, 1864.744054, 1864.744054, 0.000000, X, Y) && !ellipse(35484.178000, 22419.350000, 1743.192050, 1743.192050, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(36179.573989, 20205.795442, 1821.176052, 609.439160, 73.004308, X, Y) && !ellipse(35212.354000, 22692.476000, 1635.512047, 1635.512047, 0.000000, X, Y) && !ellipse(33010.966339, 15519.751480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35137.860000, 23485.308000, 3354.720097, 3354.720097, 0.000000, X, Y) && !ellipse(32697.630000, 18056.844000, 893.888026, 893.888026, 0.000000, X, Y) && !ellipse(33705.490143, 17798.957397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32487.471558, 16223.038208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(31627.332000, 15913.686000, 1847.808053, 1847.808053, 0.000000, X, Y) && !ellipse(32467.519012, 17618.128662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36344.280031, 17568.346769, 1792.986467, 863.572655, 86.437930, X, Y) && !ellipse(33105.164000, 20260.354000, 1643.672047, 1643.672047, 0.000000, X, Y) && !ellipse(36860.520000, 24041.950000, 1721.208050, 1721.208050, 0.000000, X, Y) && !ellipse(33618.155609, 20836.464905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33804.785600, 21342.094800, 1631.256047, 1631.256047, 0.000000, X, Y) && !ellipse(34098.216800, 22495.243800, 1617.424047, 856.816025, 332.626000, X, Y) && !ellipse(36652.619600, 15462.603000, 1637.280047, 1036.648030, 244.400000, X, Y) && !ellipse(37441.568000, 17140.208000, 2041.208059, 2041.208059, 0.000000, X, Y) && !ellipse(30863.997600, 22398.989800, 312.716809, 312.716809, 0.000000, X, Y) && !ellipse(36666.364000, 15393.012000, 1959.248056, 1959.248056, 0.000000, X, Y) && !ellipse(37447.818000, 14330.730000, 2095.168060, 2095.168060, 0.000000, X, Y) && !ellipse(30997.487400, 20970.264000, 1505.544043, 1505.544043, 0.000000, X, Y) && !ellipse(35676.222809, 17252.269608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29618.138916, 23296.495575, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec  5 01:14:12 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src108.gif
[Mon Dec  5 02:19:51 2011] Mean detx,y = (-5088.06, -9265.65) 
[Mon Dec  5 02:19:52 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:20:04 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:20:05 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Mon Dec  5 02:20:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src108_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.00731, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src108.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 1.1e-13
[Mon Dec  5 06:58:25 2011] Flag c found in src. 108 procflags, skipping spectral fitting