[Fri Dec  2 20:31:33 2011] Detection parameters:
  Position = (277.8, 228.7) = 14 46 37.92 -62 24 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 435.9 +/- 28.1
  Background counts = 77.0
  Rate = 0.005 +/- 0.0004

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 5.28'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 9.07"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 9.07"
[Sat Dec  3 16:57:13 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src41.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src41.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src41.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sat Dec  3 16:57:55 2011] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 107 at 11.720049 pixels away
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 08:08:37 2011] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 9.07"
[Sun Dec  4 08:08:37 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 9.07"
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src41.ximg exists
[Sun Dec  4 15:56:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src41.csv
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sun Dec  4 15:56:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src41.csv
[Sun Dec  4 15:56:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sun Dec  4 15:56:59 2011] Spatial fit model total counts = 934.050000, observed total counts = 935.000000
[Sun Dec  4 15:56:59 2011] Offset between fit and detection position for source 107 = 0.078536 pixels
[Sun Dec  4 15:56:59 2011] 907.661000 total counts/ 524.544000 bgd. counts: snr = 16.727863
Spatial fit parameters:
  Offset between fit and detection position for source 107 = 0.078536 pixels
  Position = (277.7, 228.6) = 14 46 37.97 -62 24 27.2
  Extent = 6.8 (5.6-7.8)", rotation angle = 0
  Source counts = 383.1 +/- 30.1
  Background counts = 524.5
  Rate = 0.003 +/- 0.0003
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:12 2011] XMMSAS src. selection expression = ellipse(24110.560220, 19841.561800, 409.564212, 409.564212, 0.000000, X, Y)
[Mon Dec  5 01:14:12 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src107_src.reg
[Mon Dec  5 01:14:12 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (254, 205) - (301, 252)
[Mon Dec  5 01:14:12 2011] XMMSAS bgd. selection expression = annulus(24110.560220, 19841.561800, 682.607020, 1365.214039, X, Y)
[Mon Dec  5 01:14:12 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src107.gif
[Mon Dec  5 02:20:11 2011] Mean detx,y = (3835.02, -7407.69) 
[Mon Dec  5 02:20:12 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:20:22 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:20:22 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Mon Dec  5 02:20:22 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src107_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.00335, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src107.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 5.5e-14