[Fri Dec  2 20:31:33 2011] Detection parameters:
  Position = (355.5, 239.2) = 14 45 49.29 -62 23 40.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.0 +/- 19.2
  Background counts = 123.0
  Rate = 0.001 +/- 0.0002

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 5.96'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 9.41"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.846
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 95 for pass 0, mean size = 9.41"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src95.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src95.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src95_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src95.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:16 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Sat Dec  3 16:57:16 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Sat Dec  3 16:57:16 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Sat Dec  3 16:57:55 2011] Spatial fit model total counts = 891.679000, observed total counts = 892.000000
[Sat Dec  3 16:57:55 2011] Offset between fit and detection position for source 104 = 2.781554 pixels
[Sat Dec  3 16:57:55 2011] 836.171000 total counts/ 229.680000 bgd. counts: snr = 40.018681
Spatial fit parameters:
  Offset between fit and detection position for source 104 = 2.781554 pixels
  Position = (356.9, 241.6) = 14 45 48.43 -62 23 30.5
  Extent = 18.8 (18.8-37.6)", rotation angle = 0
  Source counts = 606.5 +/- 28.9
  Background counts = 229.7
  Rate = 0.005 +/- 0.0003
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 08:08:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 18.82"
[Sun Dec  4 08:08:37 2011] source mask rpix=4.3, npix_max = 93, mask sum = 82, frac = 0.880
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 93 for pass 1, mean size = 18.82"
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src93.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src93.csv
[Sun Dec  4 15:56:19 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src93_1.ximg exists
[Sun Dec  4 15:56:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src93.csv
[Sun Dec  4 15:56:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src93 appears to have run properly
[Sun Dec  4 15:57:00 2011] Warning, spatial fit 93 centroid is now closest to src. 106
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:15 2011] XMMSAS src. selection expression = ellipse(30997.487400, 20970.264000, 1129.158032, 1129.158032, 0.000000, X, Y)
[Mon Dec  5 01:14:15 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src104_src.reg
[Mon Dec  5 01:14:15 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (292, 177) - (422, 306)
[Mon Dec  5 01:14:15 2011] XMMSAS bgd. selection expression = annulus(30997.487400, 20970.264000, 1881.930054, 3763.860108, X, Y) && !ellipse(34202.988200, 18883.761600, 1838.952053, 1838.952053, 0.000000, X, Y) && !ellipse(33726.950745, 16651.789597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34870.818000, 21247.910000, 1696.488049, 1696.488049, 0.000000, X, Y) && !ellipse(35484.178000, 22419.350000, 1743.192050, 1743.192050, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(36179.573989, 20205.795442, 1821.176052, 609.439160, 73.004308, X, Y) && !ellipse(35212.354000, 22692.476000, 1635.512047, 1635.512047, 0.000000, X, Y) && !ellipse(35525.072600, 25127.138000, 937.672027, 937.672027, 0.000000, X, Y) && !ellipse(35546.554600, 24375.670000, 1677.360048, 1677.360048, 0.000000, X, Y) && !ellipse(35974.584000, 25569.236000, 2263.744065, 1095.872032, 126.018000, X, Y) && !ellipse(35137.860000, 23485.308000, 3354.720097, 3354.720097, 0.000000, X, Y) && !ellipse(32697.630000, 18056.844000, 893.888026, 893.888026, 0.000000, X, Y) && !ellipse(33705.490143, 17798.957397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(31627.332000, 15913.686000, 1847.808053, 1847.808053, 0.000000, X, Y) && !ellipse(32467.519012, 17618.128662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36344.280031, 17568.346769, 1792.986467, 863.572655, 86.437930, X, Y) && !ellipse(33022.934200, 19356.828040, 1261.424036, 1261.424036, 0.000000, X, Y) && !ellipse(33105.164000, 20260.354000, 1643.672047, 1643.672047, 0.000000, X, Y) && !ellipse(33618.155609, 20836.464905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33804.785600, 21342.094800, 1631.256047, 1631.256047, 0.000000, X, Y) && !ellipse(34098.216800, 22495.243800, 1617.424047, 856.816025, 332.626000, X, Y) && !ellipse(30863.997600, 22398.989800, 312.716809, 312.716809, 0.000000, X, Y) && !ellipse(31023.349780, 23730.058800, 341.989610, 341.989610, 0.000000, X, Y) && !ellipse(36666.364000, 15393.012000, 1959.248056, 1959.248056, 0.000000, X, Y) && !ellipse(34186.000000, 24579.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29618.138916, 23296.495575, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec  5 01:14:15 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src104.gif
[Mon Dec  5 02:53:33 2011] Mean detx,y = (-3138.98, -7288.37) 
[Mon Dec  5 02:53:34 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:54:02 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:54:02 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Mon Dec  5 02:54:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Mon Dec  5 06:51:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:30 2011] Using photon index=1.80, rate=0.00531, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src104.arf
[Mon Dec  5 06:51:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:30 2011] Updating source flux to 6.7e-14