[Fri Dec  2 20:31:33 2011] Detection parameters:
  Position = (387.0, 240.1) = 14 45 29.57 -62 23 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 325.1 +/- 30.8
  Background counts = 177.5
  Rate = 0.004 +/- 0.0004

[Fri Dec  2 20:31:34 2011] Off-axis axis estimate = 7.69'
[Sat Dec  3 12:28:30 2011] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 12:28:30 2011] Initial guess for spatial extent in simple fitting = 10.27"
[Sat Dec  3 12:28:30 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.099
[Sat Dec  3 12:28:30 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 10.27"
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src51.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src51.csv
[Sat Dec  3 16:57:14 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat Dec  3 16:57:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src51.csv
[Sat Dec  3 16:57:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat Dec  3 16:57:15 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat Dec  3 16:57:15 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sat Dec  3 16:57:55 2011] Warning, spatial fit 51 centroid is now closest to src. 106
[Sat Dec  3 16:57:55 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:55 2011] Assessing source extent using major
[Sat Dec  3 16:57:55 2011] Source does appear to be extended
[Sat Dec  3 16:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:55 2011] Source is confused with source 106
[Sat Dec  3 16:57:55 2011] Source is confused with source 103
[Sun Dec  4 08:08:37 2011] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 08:08:37 2011] Initial guess for spatial extent in simple fitting = 10.27"
[Sun Dec  4 08:08:37 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.099
[Sun Dec  4 08:08:37 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 10.27"
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src50.ximg exists
[Sun Dec  4 15:56:18 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src50_1.ximg exists
[Sun Dec  4 15:56:19 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_src50 appears to have run properly
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sun Dec  4 15:56:20 2011] fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sun Dec  4 15:56:20 2011] Fit fullrun_mos2_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Sun Dec  4 15:56:59 2011] Warning, spatial fit 50 centroid is now closest to src. 97
[Sun Dec  4 15:56:59 2011] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 102 at 11.334510 pixels away
[Sun Dec  4 15:57:00 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:57:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:57:00 2011] Assessing source extent using major
[Sun Dec  4 15:57:00 2011] Source does appear to be extended
[Sun Dec  4 15:57:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec  5 01:14:13 2011] XMMSAS src. selection expression = ellipse(33618.155609, 20836.464905, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec  5 01:14:13 2011] Writing source region out to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src102_src.reg
[Mon Dec  5 01:14:13 2011] Extracting stamp from image fullrun_mos2_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (349, 203) - (424, 278)
[Mon Dec  5 01:14:13 2011] XMMSAS bgd. selection expression = annulus(33618.155609, 20836.464905, 1087.500000, 2175.000000, X, Y) && !ellipse(34202.988200, 18883.761600, 1838.952053, 1838.952053, 0.000000, X, Y) && !ellipse(36203.628448, 19956.939987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34870.818000, 21247.910000, 1696.488049, 1696.488049, 0.000000, X, Y) && !ellipse(35484.178000, 22419.350000, 1743.192050, 1743.192050, 0.000000, X, Y) && !ellipse(37947.510000, 29574.370000, 11645.232335, 11645.232335, 0.000000, X, Y) && !ellipse(36179.573989, 20205.795442, 1821.176052, 609.439160, 73.004308, X, Y) && !ellipse(35212.354000, 22692.476000, 1635.512047, 1635.512047, 0.000000, X, Y) && !ellipse(35546.554600, 24375.670000, 1677.360048, 1677.360048, 0.000000, X, Y) && !ellipse(35137.860000, 23485.308000, 3354.720097, 3354.720097, 0.000000, X, Y) && !ellipse(32697.630000, 18056.844000, 893.888026, 893.888026, 0.000000, X, Y) && !ellipse(33705.490143, 17798.957397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38926.266000, 31017.820000, 12678.048365, 12678.048365, 0.000000, X, Y) && !ellipse(36344.280031, 17568.346769, 1792.986467, 863.572655, 86.437930, X, Y) && !ellipse(33022.934200, 19356.828040, 1261.424036, 1261.424036, 0.000000, X, Y) && !ellipse(33105.164000, 20260.354000, 1643.672047, 1643.672047, 0.000000, X, Y) && !ellipse(36860.520000, 24041.950000, 1721.208050, 1721.208050, 0.000000, X, Y) && !ellipse(33804.785600, 21342.094800, 1631.256047, 1631.256047, 0.000000, X, Y) && !ellipse(34098.216800, 22495.243800, 1617.424047, 856.816025, 332.626000, X, Y) && !ellipse(37441.568000, 17140.208000, 2041.208059, 2041.208059, 0.000000, X, Y) && !ellipse(30997.487400, 20970.264000, 1505.544043, 1505.544043, 0.000000, X, Y)
[Mon Dec  5 01:14:13 2011] Writing fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src102.gif
[Mon Dec  5 02:26:41 2011] Mean detx,y = (-5782.62, -7762.21) 
[Mon Dec  5 02:26:42 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec  5 02:26:56 2011] Binned source spectrum to 10 counts/bin
[Mon Dec  5 02:26:57 2011] Setting source spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Mon Dec  5 02:26:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Mon Dec  5 05:18:43 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec  5 05:18:43 2011] rmf not generated due to insufficient counts
[Mon Dec  5 06:51:28 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:28 2011] Error reading totcts from fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Mon Dec  5 06:51:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:29 2011] Using photon index=1.80, rate=0.00412, arf fullrun_mos2_xmm0504810101_pi300-10000_pass1_cl_src102.arf
[Mon Dec  5 06:51:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:29 2011] Updating source flux to 6.3e-14
[Mon Dec  5 06:58:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting