[Fri Dec  2 20:29:47 2011] Detection parameters:
  Position = (421.5, 224.0) = 14 45 7.90 -62 24 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.4 +/- 28.6
  Background counts = 254.6
  Rate = 0.001 +/- 0.0002

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 10.43'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 11.64"
[Sat Dec  3 05:48:16 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.041
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 73 for pass 0, mean size = 11.64"
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src73.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src73.csv
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src73_1.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src73.csv
[Sat Dec  3 12:28:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Sat Dec  3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Sat Dec  3 16:57:42 2011] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 10.372311 pixels away
[Sat Dec  3 16:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:42 2011] Assessing source extent using major
[Sat Dec  3 16:57:42 2011] Source does appear to be extended
[Sat Dec  3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:42 2011] Source is confused with source 6
[Sun Dec  4 01:59:11 2011] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 11.64"
[Sun Dec  4 01:59:11 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.041
[Sun Dec  4 01:59:11 2011] Giving source the simple spatial ID 67 for pass 1, mean size = 11.64"
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src67.ximg exists
[Sun Dec  4 08:08:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src67.csv
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src67_1.ximg exists
[Sun Dec  4 08:08:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src67.csv
[Sun Dec  4 08:08:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sun Dec  4 08:08:37 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Sun Dec  4 15:56:46 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 13.212881 pixels away
[Sun Dec  4 15:56:46 2011] Source 91 is offset by 4.390549 and -4.971957 pixels which is larger than
2 X fitted extent = 4.572768 x 4.572768, not incorporating fit results
[Sun Dec  4 15:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:46 2011] Assessing source extent using major
[Sun Dec  4 15:56:46 2011] Source does appear to be extended
[Sun Dec  4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 21:25:44 2011] XMMSAS src. selection expression = ellipse(36623.887726, 19443.515732, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 21:25:44 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src91_src.reg
[Sun Dec  4 21:25:44 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (384, 187) - (459, 262)
[Sun Dec  4 21:25:44 2011] XMMSAS bgd. selection expression = annulus(36623.887726, 19443.515732, 1087.500000, 2175.000000, X, Y) && !ellipse(34929.275880, 21478.851800, 916.352026, 916.352026, 0.000000, X, Y) && !ellipse(35132.624400, 22257.633600, 1203.840035, 1203.840035, 0.000000, X, Y) && !ellipse(35121.362000, 21102.330000, 1671.160048, 1671.160048, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(36097.445862, 20476.210617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36404.741608, 17521.224075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36225.402200, 18542.424200, 1558.872045, 1558.872045, 0.000000, X, Y) && !ellipse(36908.178000, 17327.038600, 1982.976057, 987.416028, 7.422000, X, Y) && !ellipse(36195.138000, 16143.649600, 1620.016047, 1620.016047, 0.000000, X, Y) && !ellipse(36615.322000, 23451.418780, 2023.032058, 1617.592047, 359.900384, X, Y) && !ellipse(33926.069977, 22139.534698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37886.338226, 16573.795456, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 21:25:44 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src91.gif
[Sun Dec  4 22:19:24 2011] Mean detx,y = (-9300.45, 8124.95) 
[Sun Dec  4 22:19:25 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 22:19:37 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 22:19:37 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Sun Dec  4 22:19:37 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Mon Dec  5 00:57:25 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec  5 00:57:25 2011] rmf not generated due to insufficient counts
[Mon Dec  5 06:51:26 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:26 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Mon Dec  5 06:51:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:27 2011] Using photon index=1.80, rate=0.00126, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src91.arf
[Mon Dec  5 06:51:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:27 2011] Updating source flux to 2.3e-14
[Mon Dec  5 06:51:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting