[Fri Dec  2 20:29:46 2011] Detection parameters:
  Position = (434.2, 283.0) = 14 45 0.19 -62 20 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.0 +/- 22.6
  Background counts = 112.4
  Rate = 0.001 +/- 0.0002

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 9.90'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 11.38"
[Sat Dec  3 05:48:16 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.927
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 11.38"
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src76.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src76.csv
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src76_1.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src76.csv
[Sat Dec  3 12:28:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Sat Dec  3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Sat Dec  3 16:57:42 2011] Spatial fit model total counts = 2563.620000, observed total counts = 2554.000000
[Sat Dec  3 16:57:42 2011] Offset between fit and detection position for source 83 = 8.901981 pixels
[Sat Dec  3 16:57:42 2011] Warning, changing simple spatial fit ID from 76 to 44
[Sat Dec  3 16:57:42 2011] 2471.764574 total counts/ 2471.480000 bgd. counts: snr = 0.005724
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 8.901981 pixels
  Position = (439.3, 275.7) = 14 44 56.96 -62 21 0.6
  Extent = 22.4 (2.8-42.0)", rotation angle = 0
  Source counts = 0.3 +/- 49.7
  Background counts = 2471.5
  Rate = 2e-06 +/- 0.0004
  Deleting source due to low Poisson probability