[Fri Dec  2 20:29:46 2011] Detection parameters:
  Position = (395.9, 286.1) = 14 45 24.07 -62 20 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.6 +/- 22.7
  Background counts = 112.8
  Rate = 0.002 +/- 0.0003

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 7.13'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 9.99"
[Sat Dec  3 05:48:16 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.959
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 53 for pass 0, mean size = 9.99"
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src53.ximg exists
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sat Dec  3 12:28:29 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src53 appears to have run properly
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sat Dec  3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Sat Dec  3 16:57:42 2011] Spatial fit model total counts = 4830.470000, observed total counts = 4830.000000
[Sat Dec  3 16:57:42 2011] Offset between fit and detection position for source 82 = 5.447214 pixels
[Sat Dec  3 16:57:42 2011] Warning, changing simple spatial fit ID from 53 to 25
[Sat Dec  3 16:57:42 2011] 4770.532000 total counts/ 4615.320000 bgd. counts: snr = 2.284675
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 5.447214 pixels
  Position = (395.5, 291.5) = 14 45 24.37 -62 19 52.8
  Extent = 12.5 (7.7-15.9)", rotation angle = 0
  Source counts = 155.2 +/- 69.1
  Background counts = 4615.3
  Rate = 0.001 +/- 0.0006
[Sat Dec  3 16:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:42 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:42 2011] Source does appear to be extended
[Sat Dec  3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 01:59:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 12.46"
[Sun Dec  4 01:59:11 2011] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.883
[Sun Dec  4 01:59:11 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 12.46"
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src50.ximg exists
[Sun Dec  4 08:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src50.csv
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src50_1.ximg exists
[Sun Dec  4 08:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src50.csv
[Sun Dec  4 08:08:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sun Dec  4 08:08:37 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Sun Dec  4 15:56:46 2011] Spatial fit model total counts = 4832.950000, observed total counts = 4830.000000
[Sun Dec  4 15:56:46 2011] Offset between fit and detection position for source 82 = 0.449425 pixels
[Sun Dec  4 15:56:46 2011] Warning, changing simple spatial fit ID from 50 to 25
[Sun Dec  4 15:56:46 2011] 4592.942000 total counts/ 4475.640000 bgd. counts: snr = 1.753387
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 0.449425 pixels
  Position = (395.5, 291.1) = 14 45 24.37 -62 19 54.8
  Extent = 11.1 (6.6-18.8)", rotation angle = 0
  Source counts = 117.3 +/- 67.8
  Background counts = 4475.6
  Rate = 0.001 +/- 0.0006
[Sun Dec  4 15:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:46 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:46 2011] Source does appear to be extended
[Sun Dec  4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 15:56:46 2011] Source is confused with source 18
[Sun Dec  4 15:56:46 2011] Source is confused with source 42
[Sun Dec  4 21:25:44 2011] XMMSAS src. selection expression = ellipse(34359.364000, 25273.620000, 668.130019, 668.130019, 0.000000, X, Y)
[Sun Dec  4 21:25:44 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src82_src.reg
[Sun Dec  4 21:25:44 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (357, 253) - (434, 329)
[Sun Dec  4 21:25:44 2011] XMMSAS bgd. selection expression = annulus(34359.364000, 25273.620000, 1113.550032, 2227.100064, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(37530.152000, 28998.736000, 1866.528054, 1866.528054, 0.000000, X, Y) && !ellipse(35132.624400, 22257.633600, 1203.840035, 1203.840035, 0.000000, X, Y) && !ellipse(35523.608400, 27003.546660, 1106.536032, 1106.536032, 0.000000, X, Y) && !ellipse(35903.496000, 25263.228000, 2393.760069, 2393.760069, 0.000000, X, Y) && !ellipse(37621.397000, 28145.252000, 1497.832043, 1497.832043, 0.000000, X, Y) && !ellipse(37078.278000, 27286.844000, 1804.584052, 1804.584052, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35996.758000, 25675.718000, 1727.880050, 1727.880050, 0.000000, X, Y) && !ellipse(34950.646000, 23169.196000, 1127.728032, 1127.728032, 0.000000, X, Y) && !ellipse(35959.298000, 24324.054000, 1760.144051, 659.051219, 90.000000, X, Y) && !ellipse(35852.228000, 27463.254000, 1741.040050, 1489.704043, 121.065100, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(36013.321600, 22922.442200, 700.493620, 700.493620, 0.000000, X, Y) && !ellipse(36665.592926, 26921.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35026.478000, 25228.349800, 1993.592057, 1993.592057, 0.000000, X, Y) && !ellipse(32435.581665, 25995.800140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36680.556671, 23786.600708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37296.648254, 24740.576630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33796.552338, 26814.196991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36615.322000, 23451.418780, 2023.032058, 1617.592047, 359.900384, X, Y) && !ellipse(37226.093506, 22587.801880, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 21:25:44 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src82.gif
[Sun Dec  4 22:15:01 2011] Mean detx,y = (-3294.29, 7036.55) 
[Sun Dec  4 22:15:02 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 22:15:18 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 22:15:18 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Sun Dec  4 22:15:18 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Mon Dec  5 06:51:26 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:26 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Mon Dec  5 06:51:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:27 2011] Using photon index=1.80, rate=0.00103, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src82.arf
[Mon Dec  5 06:51:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:27 2011] Updating source flux to 1.4e-14
[Mon Dec  5 06:51:32 2011] Flag c found in src. 82 procflags, skipping spectral fitting