[Fri Dec 2 20:29:43 2011] Detection parameters: Position = (443.0, 350.0) = 14 44 54.94 -62 15 38.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1607.7 +/- 54.4 Background counts = 184.7 Rate = 0.02 +/- 0.0008 [Fri Dec 2 20:29:47 2011] Off-axis axis estimate = 11.12' [Sat Dec 3 05:48:16 2011] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting [Sat Dec 3 05:48:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Dec 3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 11.99" [Sat Dec 3 05:48:16 2011] source mask rpix=2.8, npix_max = 42, mask sum = 32, frac = 0.754 [Sat Dec 3 05:48:16 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 11.99" [Sat Dec 3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src3.ximg exists [Sat Dec 3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src3.csv [Sat Dec 3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src3_1.ximg exists [Sat Dec 3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src3.csv [Sat Dec 3 12:28:28 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Sat Dec 3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Sat Dec 3 12:28:29 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Sat Dec 3 16:57:42 2011] Warning, spatial fit 3 centroid is now closest to src. 2 [Sat Dec 3 16:57:42 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.682184 pixels away [Sat Dec 3 16:57:42 2011] Spatial fit model total counts = 6921.080000, observed total counts = 6912.000000 [Sat Dec 3 16:57:42 2011] Offset between fit and detection position for source 8 = 1.668903 pixels [Sat Dec 3 16:57:42 2011] Warning, changing simple spatial fit ID from 3 to 16 [Sat Dec 3 16:57:42 2011] 6745.071000 total counts/ 6429.690000 bgd. counts: snr = 3.933150 Spatial fit parameters: Offset between fit and detection position for source 8 = 1.668903 pixels Position = (442.7, 351.7) = 14 44 55.10 -62 15 30.2 Extent = 8.6 (6.8-11.2)", rotation angle = 0 Source counts = 315.4 +/- 82.1 Background counts = 6429.7 Rate = 0.003 +/- 0.0007 [Sat Dec 3 16:57:42 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 16:57:42 2011] Assessing source extent using major axis lower bound [Sat Dec 3 16:57:42 2011] Source does appear to be extended [Sat Dec 3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 3 16:57:42 2011] Source is confused with source 2 [Sun Dec 4 01:59:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Dec 4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 8.57" [Sun Dec 4 01:59:11 2011] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.942 [Sun Dec 4 01:59:11 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 8.57" [Sun Dec 4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src3.ximg exists [Sun Dec 4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src3_1.ximg exists [Sun Dec 4 08:08:35 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src3 appears to have run properly [Sun Dec 4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Sun Dec 4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Sun Dec 4 08:08:36 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Sun Dec 4 15:56:46 2011] Spatial fit model total counts = 7632.960000, observed total counts = 7627.000000 [Sun Dec 4 15:56:46 2011] Offset between fit and detection position for source 8 = 3.695424 pixels [Sun Dec 4 15:56:46 2011] 7277.130000 total counts/ 5925.420000 bgd. counts: snr = 17.559978 Spatial fit parameters: Offset between fit and detection position for source 8 = 3.695424 pixels Position = (444.3, 355.0) = 14 44 54.15 -62 15 15.5 Extent = 21.5" x 10.9", rotation angle = 93 Source counts = 1351.7 +/- 85.3 Background counts = 5925.4 Rate = 0.01 +/- 0.0007 [Sun Dec 4 15:56:46 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 15:56:46 2011] Assessing source extent using major [Sun Dec 4 15:56:46 2011] Source does appear to be extended [Sun Dec 4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.98 [Sun Dec 4 15:56:46 2011] Source is asymmetric [Sun Dec 4 21:25:41 2011] Counts = 1351.710000, rescaling region sizes by 2.000000 [Sun Dec 4 21:25:41 2011] XMMSAS src. selection expression = ellipse(38601.258347, 30837.836385, 2585.136074, 1304.218429, 93.100524, X, Y) [Sun Dec 4 21:25:41 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src8_src.reg [Sun Dec 4 21:25:41 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (296, 206) - (593, 504) [Sun Dec 4 21:25:41 2011] XMMSAS bgd. selection expression = annulus(38601.258347, 30837.836385, 8617.120248, 17234.240496, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(37530.152000, 28998.736000, 1866.528054, 1866.528054, 0.000000, X, Y) && !ellipse(34929.275880, 21478.851800, 916.352026, 916.352026, 0.000000, X, Y) && !ellipse(35132.624400, 22257.633600, 1203.840035, 1203.840035, 0.000000, X, Y) && !ellipse(35121.362000, 21102.330000, 1671.160048, 1671.160048, 0.000000, X, Y) && !ellipse(35523.608400, 27003.546660, 1106.536032, 1106.536032, 0.000000, X, Y) && !ellipse(38745.298000, 31781.772000, 1944.032056, 1073.568031, 108.757400, X, Y) && !ellipse(36693.003400, 28634.271600, 858.200025, 858.200025, 0.000000, X, Y) && !ellipse(39468.138306, 30669.676544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40129.312000, 31325.222000, 1481.880043, 1481.880043, 0.000000, X, Y) && !ellipse(35903.496000, 25263.228000, 2393.760069, 2393.760069, 0.000000, X, Y) && !ellipse(37621.397000, 28145.252000, 1497.832043, 1497.832043, 0.000000, X, Y) && !ellipse(37078.278000, 27286.844000, 1804.584052, 1804.584052, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35996.758000, 25675.718000, 1727.880050, 1727.880050, 0.000000, X, Y) && !ellipse(34950.646000, 23169.196000, 1127.728032, 1127.728032, 0.000000, X, Y) && !ellipse(35959.298000, 24324.054000, 1760.144051, 659.051219, 90.000000, X, Y) && !ellipse(35852.228000, 27463.254000, 1741.040050, 1489.704043, 121.065100, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(36013.321600, 22922.442200, 700.493620, 700.493620, 0.000000, X, Y) && !ellipse(36665.592926, 26921.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39129.722961, 32467.707520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35026.478000, 25228.349800, 1993.592057, 1993.592057, 0.000000, X, Y) && !ellipse(36097.445862, 20476.210617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41905.958000, 31494.748000, 609.011218, 609.011218, 0.000000, X, Y) && !ellipse(41032.553253, 32229.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36404.741608, 17521.224075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36225.402200, 18542.424200, 1558.872045, 1558.872045, 0.000000, X, Y) && !ellipse(32435.581665, 25995.800140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39225.978000, 28631.232000, 1925.128055, 1925.128055, 0.000000, X, Y) && !ellipse(41238.208000, 32535.914000, 1932.456056, 1932.456056, 0.000000, X, Y) && !ellipse(21038.795600, 26885.237400, 469.860814, 469.860814, 0.000000, X, Y) && !ellipse(36908.178000, 17327.038600, 1982.976057, 987.416028, 7.422000, X, Y) && !ellipse(41015.383179, 30918.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36680.556671, 23786.600708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28411.545760, 25900.130200, 286.355208, 286.355208, 0.000000, X, Y) && !ellipse(37148.940000, 30005.900000, 1809.456052, 842.536024, 47.797400, X, Y) && !ellipse(37296.648254, 24740.576630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32455.663600, 22413.706000, 279.113608, 279.113608, 0.000000, X, Y) && !ellipse(33796.552338, 26814.196991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36195.138000, 16143.649600, 1620.016047, 1620.016047, 0.000000, X, Y) && !ellipse(37642.808319, 25452.254578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41787.218000, 33103.676000, 2154.472062, 2154.472062, 0.000000, X, Y) && !ellipse(36615.322000, 23451.418780, 2023.032058, 1617.592047, 359.900384, X, Y) && !ellipse(37748.223602, 31688.084717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42387.459839, 31876.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33926.069977, 22139.534698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34359.364000, 25273.620000, 890.840026, 890.840026, 0.000000, X, Y) && !ellipse(22781.773600, 34160.811600, 456.157613, 456.157613, 0.000000, X, Y) && !ellipse(29197.717360, 25536.687000, 517.540015, 517.540015, 0.000000, X, Y) && !ellipse(31025.073460, 23714.502000, 276.064008, 276.064008, 0.000000, X, Y) && !ellipse(23303.773600, 27113.811600, 456.157613, 456.157613, 0.000000, X, Y) && !ellipse(39925.819800, 24761.933000, 333.776810, 333.776810, 0.000000, X, Y) && !ellipse(37886.338226, 16573.795456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27110.369600, 27531.676200, 278.466408, 278.466408, 0.000000, X, Y) && !ellipse(37509.661255, 23358.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37226.093506, 22587.801880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42308.955933, 31138.934387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41511.748871, 33435.128510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36226.184000, 30861.852000, 1809.456052, 1809.456052, 0.000000, X, Y) && !ellipse(36623.887726, 19443.515732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26491.957000, 32166.252400, 1327.560038, 627.700018, 336.136215, X, Y) && !ellipse(41296.585297, 30245.485168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30927.588745, 25164.444092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24141.868000, 29620.468200, 1293.760037, 1293.760037, 0.000000, X, Y) && !ellipse(41785.269989, 22408.393585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41715.503784, 30350.698669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41033.000000, 36358.898000, 2252.752065, 2252.752065, 0.000000, X, Y) && !ellipse(41352.880000, 34430.441740, 1141.032033, 1141.032033, 0.000000, X, Y) [Sun Dec 4 21:25:41 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src8.gif [Sun Dec 4 21:32:32 2011] Mean detx,y = (1268.54, 11851.95) [Sun Dec 4 21:32:33 2011] Setting backscal keywords in source and bgd. spectrum [Sun Dec 4 21:33:49 2011] Binned source spectrum to 10 counts/bin [Sun Dec 4 21:33:49 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Sun Dec 4 21:33:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src8_bgd.pi.gz [Mon Dec 5 06:51:25 2011] Updating aperture counts using extracted products [Mon Dec 5 06:51:25 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Mon Dec 5 06:51:26 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 06:51:26 2011] Using photon index=1.80, rate=0.0119, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src8.arf [Mon Dec 5 06:51:26 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 06:51:26 2011] Updating source flux to 1.9e-13 [Mon Dec 5 06:51:32 2011] Flag c found in src. 8 procflags, skipping spectral fitting