[Fri Dec  2 20:29:46 2011] Detection parameters:
  Position = (480.0, 349.4) = 14 44 31.83 -62 15 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.8 +/- 24.5
  Background counts = 163.3
  Rate = 0.001 +/- 0.0002

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 13.68'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 13.27"
[Sat Dec  3 05:48:16 2011] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.111
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 83 for pass 0, mean size = 13.27"
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src83.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src83.csv
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src83_1.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src83.csv
[Sat Dec  3 12:28:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Sat Dec  3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Sat Dec  3 16:57:42 2011] Source 71 is offset by -6.591382 and 6.689962 pixels which is larger than
2 X fitted extent = 1.504193 x 1.504193, not incorporating fit results
[Sat Dec  3 16:57:42 2011] Warning: source 83 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 71 at 10.762829 pixels away
[Sat Dec  3 16:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:42 2011] Assessing source extent using major
[Sat Dec  3 16:57:42 2011] Source does appear to be extended
[Sat Dec  3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:42 2011] Source is confused with source 54
[Sun Dec  4 01:59:11 2011] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 13.27"
[Sun Dec  4 01:59:11 2011] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.111
[Sun Dec  4 01:59:11 2011] Giving source the simple spatial ID 74 for pass 1, mean size = 13.27"
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src74.ximg exists
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src74_1.ximg exists
[Sun Dec  4 08:08:36 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src74 appears to have run properly
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Sun Dec  4 08:08:37 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Sun Dec  4 15:56:46 2011] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 71 at 12.987001 pixels away
[Sun Dec  4 15:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:46 2011] Assessing source extent using major
[Sun Dec  4 15:56:46 2011] Source does appear to be extended
[Sun Dec  4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 21:25:44 2011] XMMSAS src. selection expression = ellipse(41715.503784, 30350.698669, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 21:25:44 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src71_src.reg
[Sun Dec  4 21:25:44 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (443, 312) - (518, 387)
[Sun Dec  4 21:25:44 2011] XMMSAS bgd. selection expression = annulus(41715.503784, 30350.698669, 1087.500000, 2175.000000, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(38601.258347, 30837.836385, 1723.424050, 869.478952, 93.100524, X, Y) && !ellipse(38745.298000, 31781.772000, 1944.032056, 1073.568031, 108.757400, X, Y) && !ellipse(39468.138306, 30669.676544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40129.312000, 31325.222000, 1481.880043, 1481.880043, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(39129.722961, 32467.707520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41905.958000, 31494.748000, 609.011218, 609.011218, 0.000000, X, Y) && !ellipse(41032.553253, 32229.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39225.978000, 28631.232000, 1925.128055, 1925.128055, 0.000000, X, Y) && !ellipse(41238.208000, 32535.914000, 1932.456056, 1932.456056, 0.000000, X, Y) && !ellipse(41015.383179, 30918.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41787.218000, 33103.676000, 2154.472062, 2154.472062, 0.000000, X, Y) && !ellipse(42387.459839, 31876.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42308.955933, 31138.934387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41296.585297, 30245.485168, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 21:25:44 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src71.gif
[Sun Dec  4 22:21:35 2011] Mean detx,y = (784.21, 14820.58) 
[Sun Dec  4 22:21:35 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 22:21:51 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 22:21:52 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sun Dec  4 22:21:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Mon Dec  5 01:07:00 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec  5 01:07:00 2011] rmf not generated due to insufficient counts
[Mon Dec  5 06:51:26 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:26 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Mon Dec  5 06:51:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:27 2011] Using photon index=1.80, rate=0.000985, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src71.arf
[Mon Dec  5 06:51:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:27 2011] Updating source flux to 2.1e-14
[Mon Dec  5 06:51:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting