[Fri Dec  2 20:29:45 2011] Detection parameters:
  Position = (373.4, 257.8) = 14 45 38.08 -62 22 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.7 +/- 20.3
  Background counts = 125.5
  Rate = 0.003 +/- 0.0003

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 6.18'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 9.52"
[Sat Dec  3 05:48:16 2011] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.726
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 9.52"
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src45.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src45.csv
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src45.csv
[Sat Dec  3 12:28:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Dec  3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Dec  3 16:57:42 2011] Spatial fit model total counts = 986.999000, observed total counts = 987.000000
[Sat Dec  3 16:57:42 2011] Offset between fit and detection position for source 58 = 0.440422 pixels
[Sat Dec  3 16:57:42 2011] 978.616000 total counts/ 875.832000 bgd. counts: snr = 3.473083
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.440422 pixels
  Position = (373.6, 258.2) = 14 45 37.97 -62 22 18.1
  Extent = 3.5 (2.9-4.2)", rotation angle = 0
  Source counts = 102.8 +/- 31.3
  Background counts = 875.8
  Rate = 0.0009 +/- 0.0003
[Sat Dec  3 16:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:42 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:42 2011] Source does appear to be extended
[Sat Dec  3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 01:59:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 3.52"
[Sun Dec  4 01:59:11 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.876
[Sun Dec  4 01:59:11 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 3.52"
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src42.ximg exists
[Sun Dec  4 08:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src42.csv
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src42_1.ximg exists
[Sun Dec  4 08:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src42.csv
[Sun Dec  4 08:08:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sun Dec  4 08:08:37 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Sun Dec  4 15:56:46 2011] Spatial fit model total counts = 988.000000, observed total counts = 988.000000
[Sun Dec  4 15:56:46 2011] Offset between fit and detection position for source 58 = 0.004817 pixels
[Sun Dec  4 15:56:46 2011] 978.136000 total counts/ 876.082000 bgd. counts: snr = 3.447924
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.004817 pixels
  Position = (373.6, 258.2) = 14 45 37.97 -62 22 18.1
  Extent = 3.5 (2.9-4.2)", rotation angle = 0
  Source counts = 102.1 +/- 31.3
  Background counts = 876.1
  Rate = 0.0009 +/- 0.0003
[Sun Dec  4 15:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:46 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:46 2011] Source does appear to be extended
[Sun Dec  4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 21:25:43 2011] XMMSAS src. selection expression = ellipse(32455.663600, 22413.706000, 209.335206, 209.335206, 0.000000, X, Y)
[Sun Dec  4 21:25:43 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src58_src.reg
[Sun Dec  4 21:25:43 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (362, 246) - (386, 270)
[Sun Dec  4 21:25:43 2011] XMMSAS bgd. selection expression = annulus(32455.663600, 22413.706000, 348.892010, 697.784020, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(33926.069977, 22139.534698, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 21:25:43 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src58.gif
[Sun Dec  4 22:08:51 2011] Mean detx,y = (-5819.70, 4593.25) 
[Sun Dec  4 22:08:51 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 22:09:03 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 22:09:03 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sun Dec  4 22:09:03 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Mon Dec  5 06:51:26 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:26 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon Dec  5 06:51:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:27 2011] Using photon index=1.80, rate=0.000895, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src58.arf
[Mon Dec  5 06:51:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:27 2011] Updating source flux to 1.7e-14