[Fri Dec 2 20:29:45 2011] Detection parameters: Position = (429.3, 284.9) = 14 45 3.26 -62 20 22.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 181.1 +/- 23.6 Background counts = 129.9 Rate = 0.003 +/- 0.0004 [Fri Dec 2 20:29:47 2011] Off-axis axis estimate = 9.53' [Sat Dec 3 05:48:16 2011] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting [Sat Dec 3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 11.20" [Sat Dec 3 05:48:16 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953 [Sat Dec 3 05:48:16 2011] Giving source the simple spatial ID 44 for pass 0, mean size = 11.20" [Sat Dec 3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src44.ximg exists [Sat Dec 3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src44.csv [Sat Dec 3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src44_1.ximg exists [Sat Dec 3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src44.csv [Sat Dec 3 12:28:29 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src44_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists [Sat Dec 3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists [Sat Dec 3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly [Sat Dec 3 16:57:42 2011] Warning, spatial fit 44 centroid is now closest to src. 83 [Sat Dec 3 16:57:42 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 16:57:42 2011] Assessing source extent using major [Sat Dec 3 16:57:42 2011] Source does appear to be extended [Sat Dec 3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 4 01:59:11 2011] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting [Sun Dec 4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 11.20" [Sun Dec 4 01:59:11 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953 [Sun Dec 4 01:59:11 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 11.20" [Sun Dec 4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src41.ximg exists [Sun Dec 4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src41_1.ximg exists [Sun Dec 4 08:08:36 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src41 appears to have run properly [Sun Dec 4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists [Sun Dec 4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists [Sun Dec 4 08:08:37 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly [Sun Dec 4 15:56:46 2011] Source 56 is offset by -5.836089 and 2.409777 pixels which is larger than 2 X fitted extent = 1.583370 x 1.583370, not incorporating fit results [Sun Dec 4 15:56:46 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 15:56:46 2011] Assessing source extent using major [Sun Dec 4 15:56:46 2011] Source does appear to be extended [Sun Dec 4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 4 15:56:46 2011] Source is confused with source 18 [Sun Dec 4 15:56:46 2011] Source is confused with source 86 [Sun Dec 4 21:25:43 2011] XMMSAS src. selection expression = ellipse(37296.648254, 24740.576630, 652.500000, 652.500000, 0.000000, X, Y) [Sun Dec 4 21:25:43 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src56_src.reg [Sun Dec 4 21:25:43 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (392, 247) - (467, 322) [Sun Dec 4 21:25:43 2011] XMMSAS bgd. selection expression = annulus(37296.648254, 24740.576630, 1087.500000, 2175.000000, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(35132.624400, 22257.633600, 1203.840035, 1203.840035, 0.000000, X, Y) && !ellipse(35121.362000, 21102.330000, 1671.160048, 1671.160048, 0.000000, X, Y) && !ellipse(35523.608400, 27003.546660, 1106.536032, 1106.536032, 0.000000, X, Y) && !ellipse(35903.496000, 25263.228000, 2393.760069, 2393.760069, 0.000000, X, Y) && !ellipse(37621.397000, 28145.252000, 1497.832043, 1497.832043, 0.000000, X, Y) && !ellipse(37078.278000, 27286.844000, 1804.584052, 1804.584052, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35996.758000, 25675.718000, 1727.880050, 1727.880050, 0.000000, X, Y) && !ellipse(34950.646000, 23169.196000, 1127.728032, 1127.728032, 0.000000, X, Y) && !ellipse(35959.298000, 24324.054000, 1760.144051, 659.051219, 90.000000, X, Y) && !ellipse(35852.228000, 27463.254000, 1741.040050, 1489.704043, 121.065100, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(36013.321600, 22922.442200, 700.493620, 700.493620, 0.000000, X, Y) && !ellipse(36665.592926, 26921.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35026.478000, 25228.349800, 1993.592057, 1993.592057, 0.000000, X, Y) && !ellipse(39225.978000, 28631.232000, 1925.128055, 1925.128055, 0.000000, X, Y) && !ellipse(36680.556671, 23786.600708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37642.808319, 25452.254578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36615.322000, 23451.418780, 2023.032058, 1617.592047, 359.900384, X, Y) && !ellipse(34359.364000, 25273.620000, 890.840026, 890.840026, 0.000000, X, Y) && !ellipse(37509.661255, 23358.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37226.093506, 22587.801880, 870.000000, 870.000000, 0.000000, X, Y) [Sun Dec 4 21:25:43 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src56.gif [Sun Dec 4 22:08:31 2011] Mean detx,y = (-4194.48, 9672.82) [Sun Dec 4 22:08:32 2011] Setting backscal keywords in source and bgd. spectrum [Sun Dec 4 22:08:46 2011] Binned source spectrum to 10 counts/bin [Sun Dec 4 22:08:46 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src56_src_b10.pi.gz [Sun Dec 4 22:08:46 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src56_bgd.pi.gz [Mon Dec 5 00:20:28 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Dec 5 00:20:28 2011] rmf not generated due to insufficient counts [Mon Dec 5 06:51:26 2011] Updating aperture counts using extracted products [Mon Dec 5 06:51:26 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src56_src_b10.pi.gz [Mon Dec 5 06:51:27 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 06:51:27 2011] Using photon index=1.80, rate=0.00269, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src56.arf [Mon Dec 5 06:51:27 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 06:51:27 2011] Updating source flux to 4.1e-14 [Mon Dec 5 06:51:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting