[Fri Dec  2 20:29:45 2011] Detection parameters:
  Position = (478.1, 396.0) = 14 44 33.23 -62 12 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.4 +/- 19.1
  Background counts = 99.6
  Rate = 0.0009 +/- 0.0002

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 14.82'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 13.84"
[Sat Dec  3 05:48:16 2011] source mask rpix=3.2, npix_max = 54, mask sum = 57, frac = 1.051
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 85 for pass 0, mean size = 13.84"
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src85.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src85.csv
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src85_1.ximg exists
[Sat Dec  3 12:28:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src85.csv
[Sat Dec  3 12:28:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sat Dec  3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Sat Dec  3 16:57:42 2011] Warning, spatial fit 85 centroid is now closest to src. 47
[Sat Dec  3 16:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:42 2011] Assessing source extent using major
[Sat Dec  3 16:57:42 2011] Source does appear to be extended
[Sat Dec  3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:42 2011] Source is confused with source 46
[Sun Dec  4 01:59:11 2011] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 13.84"
[Sun Dec  4 01:59:11 2011] source mask rpix=3.2, npix_max = 54, mask sum = 57, frac = 1.051
[Sun Dec  4 01:59:11 2011] Giving source the simple spatial ID 76 for pass 1, mean size = 13.84"
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src76.ximg exists
[Sun Dec  4 08:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src76.csv
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src76_1.ximg exists
[Sun Dec  4 08:08:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src76.csv
[Sun Dec  4 08:08:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Sun Dec  4 08:08:37 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Sun Dec  4 08:08:37 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Sun Dec  4 15:56:46 2011] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 14.368279 pixels away
[Sun Dec  4 15:56:46 2011] Spatial fit model total counts = 1539.130000, observed total counts = 1541.000000
[Sun Dec  4 15:56:46 2011] Offset between fit and detection position for source 52 = 2.256578 pixels
[Sun Dec  4 15:56:46 2011] 1202.234000 total counts/ 1002.000000 bgd. counts: snr = 6.325633
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 2.256578 pixels
  Position = (475.9, 396.3) = 14 44 34.63 -62 12 15.0
  Extent = 14.3 (8.7-21.9)", rotation angle = 0
  Source counts = 200.2 +/- 34.7
  Background counts = 1002.0
  Rate = 0.002 +/- 0.0003
[Sun Dec  4 15:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:46 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:46 2011] Source does appear to be extended
[Sun Dec  4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 21:25:44 2011] XMMSAS src. selection expression = ellipse(41352.880000, 34430.441740, 855.774025, 855.774025, 0.000000, X, Y)
[Sun Dec  4 21:25:44 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src52_src.reg
[Sun Dec  4 21:25:44 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (427, 347) - (525, 445)
[Sun Dec  4 21:25:44 2011] XMMSAS bgd. selection expression = annulus(41352.880000, 34430.441740, 1426.290041, 2852.580082, X, Y) && !ellipse(38601.258347, 30837.836385, 1723.424050, 869.478952, 93.100524, X, Y) && !ellipse(38745.298000, 31781.772000, 1944.032056, 1073.568031, 108.757400, X, Y) && !ellipse(40129.312000, 31325.222000, 1481.880043, 1481.880043, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(39129.722961, 32467.707520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41905.958000, 31494.748000, 609.011218, 609.011218, 0.000000, X, Y) && !ellipse(41032.553253, 32229.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41238.208000, 32535.914000, 1932.456056, 1932.456056, 0.000000, X, Y) && !ellipse(41015.383179, 30918.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37148.940000, 30005.900000, 1809.456052, 842.536024, 47.797400, X, Y) && !ellipse(41787.218000, 33103.676000, 2154.472062, 2154.472062, 0.000000, X, Y) && !ellipse(37748.223602, 31688.084717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42387.459839, 31876.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42308.955933, 31138.934387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41511.748871, 33435.128510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41033.000000, 36358.898000, 2252.752065, 2252.752065, 0.000000, X, Y)
[Sun Dec  4 21:25:44 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src52.gif
[Sun Dec  4 22:24:14 2011] Mean detx,y = (4732.20, 15070.58) 
[Sun Dec  4 22:24:15 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 22:24:29 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 22:24:29 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun Dec  4 22:24:29 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Mon Dec  5 06:51:26 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:26 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Mon Dec  5 06:51:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:27 2011] Using photon index=1.80, rate=0.00176, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src52.arf
[Mon Dec  5 06:51:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:27 2011] Updating source flux to 3.8e-14
[Mon Dec  5 06:51:32 2011] Flag c found in src. 52 procflags, skipping spectral fitting