[Fri Dec 2 20:29:44 2011] Detection parameters: Position = (476.4, 375.9) = 14 44 34.18 -62 13 44.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 423.7 +/- 33.1 Background counts = 125.3 Rate = 0.004 +/- 0.0003 [Fri Dec 2 20:29:47 2011] Off-axis axis estimate = 14.07' [Sat Dec 3 05:48:16 2011] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting [Sat Dec 3 05:48:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Dec 3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 13.47" [Sat Dec 3 05:48:16 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.948 [Sat Dec 3 05:48:16 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 13.47" [Sat Dec 3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src35.ximg exists [Sat Dec 3 12:28:29 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src35.csv [Sat Dec 3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src35_1.ximg exists [Sat Dec 3 12:28:29 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src35.csv [Sat Dec 3 12:28:29 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src35_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists [Sat Dec 3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists [Sat Dec 3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly [Sat Dec 3 16:57:42 2011] Warning, spatial fit 35 centroid is now closest to src. 46 [Sat Dec 3 16:57:42 2011] Spatial fit model total counts = 2628.790000, observed total counts = 2632.000000 [Sat Dec 3 16:57:42 2011] Offset between fit and detection position for source 32 = 2.403150 pixels [Sat Dec 3 16:57:42 2011] Warning, changing simple spatial fit ID from 35 to 68 [Sat Dec 3 16:57:42 2011] 2572.040000 total counts/ 1547.480000 bgd. counts: snr = 26.045031 Spatial fit parameters: Offset between fit and detection position for source 32 = 2.403150 pixels Position = (474.0, 375.7) = 14 44 35.68 -62 13 44.8 Extent = 26.9 (26.2-27.3)", rotation angle = 0 Source counts = 1024.6 +/- 50.7 Background counts = 1547.5 Rate = 0.009 +/- 0.0004 [Sat Dec 3 16:57:42 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 16:57:42 2011] Assessing source extent using major axis lower bound [Sat Dec 3 16:57:42 2011] Source does appear to be extended [Sat Dec 3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 3 16:57:42 2011] Source is confused with source 11 [Sun Dec 4 01:59:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Dec 4 01:59:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Dec 4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 26.90" [Sun Dec 4 01:59:11 2011] source mask rpix=6.2, npix_max = 178, mask sum = 182, frac = 1.018 [Sun Dec 4 01:59:11 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 26.90" [Sun Dec 4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src34.ximg exists [Sun Dec 4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src34.csv [Sun Dec 4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src34_1.ximg exists [Sun Dec 4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src34.csv [Sun Dec 4 08:08:35 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src34_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Dec 4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists [Sun Dec 4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists [Sun Dec 4 08:08:36 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly [Sun Dec 4 15:56:46 2011] Warning, spatial fit 34 centroid is now closest to src. 10 [Sun Dec 4 15:56:46 2011] Spatial fit model total counts = 2632.450000, observed total counts = 2632.000000 [Sun Dec 4 15:56:46 2011] Offset between fit and detection position for source 32 = 1.248161 pixels [Sun Dec 4 15:56:46 2011] Warning, changing simple spatial fit ID from 34 to 64 [Sun Dec 4 15:56:46 2011] 1976.241000 total counts/ 1252.610000 bgd. counts: snr = 20.446041 Spatial fit parameters: Offset between fit and detection position for source 32 = 1.248161 pixels Position = (474.6, 374.5) = 14 44 35.36 -62 13 49.8 Extent = 24.2 (17.9-27.3)", rotation angle = 0 Source counts = 723.6 +/- 44.5 Background counts = 1252.6 Rate = 0.006 +/- 0.0004 [Sun Dec 4 15:56:46 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 15:56:46 2011] Assessing source extent using major axis lower bound [Sun Dec 4 15:56:46 2011] Source does appear to be extended [Sun Dec 4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 4 21:25:43 2011] XMMSAS src. selection expression = ellipse(41238.208000, 32535.914000, 1449.342042, 1449.342042, 0.000000, X, Y) [Sun Dec 4 21:25:43 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src32_src.reg [Sun Dec 4 21:25:43 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (391, 291) - (558, 458) [Sun Dec 4 21:25:43 2011] XMMSAS bgd. selection expression = annulus(41238.208000, 32535.914000, 2415.570070, 4831.140139, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(37530.152000, 28998.736000, 1866.528054, 1866.528054, 0.000000, X, Y) && !ellipse(38601.258347, 30837.836385, 1723.424050, 869.478952, 93.100524, X, Y) && !ellipse(35523.608400, 27003.546660, 1106.536032, 1106.536032, 0.000000, X, Y) && !ellipse(38745.298000, 31781.772000, 1944.032056, 1073.568031, 108.757400, X, Y) && !ellipse(36693.003400, 28634.271600, 858.200025, 858.200025, 0.000000, X, Y) && !ellipse(39468.138306, 30669.676544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40129.312000, 31325.222000, 1481.880043, 1481.880043, 0.000000, X, Y) && !ellipse(37621.397000, 28145.252000, 1497.832043, 1497.832043, 0.000000, X, Y) && !ellipse(37078.278000, 27286.844000, 1804.584052, 1804.584052, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35852.228000, 27463.254000, 1741.040050, 1489.704043, 121.065100, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(36665.592926, 26921.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39129.722961, 32467.707520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41905.958000, 31494.748000, 609.011218, 609.011218, 0.000000, X, Y) && !ellipse(41032.553253, 32229.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39225.978000, 28631.232000, 1925.128055, 1925.128055, 0.000000, X, Y) && !ellipse(41015.383179, 30918.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37148.940000, 30005.900000, 1809.456052, 842.536024, 47.797400, X, Y) && !ellipse(41787.218000, 33103.676000, 2154.472062, 2154.472062, 0.000000, X, Y) && !ellipse(37748.223602, 31688.084717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42387.459839, 31876.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42308.955933, 31138.934387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41511.748871, 33435.128510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36226.184000, 30861.852000, 1809.456052, 1809.456052, 0.000000, X, Y) && !ellipse(41296.585297, 30245.485168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41715.503784, 30350.698669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41033.000000, 36358.898000, 2252.752065, 2252.752065, 0.000000, X, Y) && !ellipse(41352.880000, 34430.441740, 1141.032033, 1141.032033, 0.000000, X, Y) [Sun Dec 4 21:25:43 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src32.gif [Sun Dec 4 22:06:13 2011] Mean detx,y = (2754.35, 14516.89) [Sun Dec 4 22:06:14 2011] Setting backscal keywords in source and bgd. spectrum [Sun Dec 4 22:06:27 2011] Binned source spectrum to 10 counts/bin [Sun Dec 4 22:06:27 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Sun Dec 4 22:06:27 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src32_bgd.pi.gz [Mon Dec 5 06:51:26 2011] Updating aperture counts using extracted products [Mon Dec 5 06:51:26 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Mon Dec 5 06:51:27 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 06:51:27 2011] Using photon index=1.80, rate=0.00634, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src32.arf [Mon Dec 5 06:51:27 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 06:51:27 2011] Updating source flux to 1.1e-13 [Mon Dec 5 06:51:32 2011] Flag c found in src. 32 procflags, skipping spectral fitting