[Fri Dec  2 20:29:44 2011] Detection parameters:
  Position = (422.0, 310.0) = 14 45 7.87 -62 18 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 808.7 +/- 41.9
  Background counts = 134.8
  Rate = 0.01 +/- 0.0006

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 9.00'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 10.93"
[Sat Dec  3 05:48:16 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 10.93"
[Sat Dec  3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src23.ximg exists
[Sat Dec  3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src23.csv
[Sat Dec  3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Dec  3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src23.csv
[Sat Dec  3 12:28:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Dec  3 12:28:30 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Dec  3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Dec  3 16:57:42 2011] Source 26 is offset by -6.929277 and -0.931321 pixels which is larger than
2 X fitted extent = 1.241292 x 1.241292, not incorporating fit results
[Sat Dec  3 16:57:42 2011] Source 26 is offset by -4.368242 and -6.260195 pixels which is larger than
2 X fitted extent = 1.256018 x 1.256018, not incorporating fit results
[Sat Dec  3 16:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:42 2011] Assessing source extent using major
[Sat Dec  3 16:57:42 2011] Source does appear to be extended
[Sat Dec  3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:42 2011] Source is confused with source 16
[Sun Dec  4 01:59:11 2011] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Sun Dec  4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 10.93"
[Sun Dec  4 01:59:11 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Sun Dec  4 01:59:11 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 10.93"
[Sun Dec  4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src23.ximg exists
[Sun Dec  4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src23.csv
[Sun Dec  4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Dec  4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src23.csv
[Sun Dec  4 08:08:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Dec  4 08:08:36 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Dec  4 15:56:46 2011] Warning, spatial fit 23 centroid is now closest to src. 16
[Sun Dec  4 15:56:46 2011] Source 26 is offset by -5.458610 and 5.745345 pixels which is larger than
2 X fitted extent = 1.386975 x 1.386975, not incorporating fit results
[Sun Dec  4 15:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:46 2011] Assessing source extent using major
[Sun Dec  4 15:56:46 2011] Source does appear to be extended
[Sun Dec  4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 21:25:42 2011] XMMSAS src. selection expression = ellipse(36665.592926, 26921.415039, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 21:25:42 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src26_src.reg
[Sun Dec  4 21:25:42 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (385, 272) - (460, 347)
[Sun Dec  4 21:25:42 2011] XMMSAS bgd. selection expression = annulus(36665.592926, 26921.415039, 1087.500000, 2175.000000, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(37530.152000, 28998.736000, 1866.528054, 1866.528054, 0.000000, X, Y) && !ellipse(35523.608400, 27003.546660, 1106.536032, 1106.536032, 0.000000, X, Y) && !ellipse(36693.003400, 28634.271600, 858.200025, 858.200025, 0.000000, X, Y) && !ellipse(35903.496000, 25263.228000, 2393.760069, 2393.760069, 0.000000, X, Y) && !ellipse(37621.397000, 28145.252000, 1497.832043, 1497.832043, 0.000000, X, Y) && !ellipse(37078.278000, 27286.844000, 1804.584052, 1804.584052, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35996.758000, 25675.718000, 1727.880050, 1727.880050, 0.000000, X, Y) && !ellipse(35959.298000, 24324.054000, 1760.144051, 659.051219, 90.000000, X, Y) && !ellipse(35852.228000, 27463.254000, 1741.040050, 1489.704043, 121.065100, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(35026.478000, 25228.349800, 1993.592057, 1993.592057, 0.000000, X, Y) && !ellipse(39225.978000, 28631.232000, 1925.128055, 1925.128055, 0.000000, X, Y) && !ellipse(37148.940000, 30005.900000, 1809.456052, 842.536024, 47.797400, X, Y) && !ellipse(37296.648254, 24740.576630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33796.552338, 26814.196991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37642.808319, 25452.254578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36615.322000, 23451.418780, 2023.032058, 1617.592047, 359.900384, X, Y) && !ellipse(34359.364000, 25273.620000, 890.840026, 890.840026, 0.000000, X, Y) && !ellipse(36226.184000, 30861.852000, 1809.456052, 1809.456052, 0.000000, X, Y)
[Sun Dec  4 21:25:42 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src26.gif
[Sun Dec  4 21:59:30 2011] Mean detx,y = (-1936.48, 9395.56) 
[Sun Dec  4 21:59:31 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 21:59:46 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 21:59:46 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Dec  4 21:59:46 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Dec  4 23:50:49 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec  4 23:50:49 2011] rmf not generated due to insufficient counts
[Mon Dec  5 06:51:25 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:25 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Dec  5 06:51:26 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:26 2011] Using photon index=1.80, rate=0.0108, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src26.arf
[Mon Dec  5 06:51:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:26 2011] Updating source flux to 1.5e-13
[Mon Dec  5 06:51:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting