[Fri Dec  2 20:29:44 2011] Detection parameters:
  Position = (409.9, 277.0) = 14 45 15.33 -62 20 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 951.9 +/- 43.0
  Background counts = 105.5
  Rate = 0.01 +/- 0.0006

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 8.23'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 10.54"
[Sat Dec  3 05:48:16 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.053
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 10.54"
[Sat Dec  3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src19.ximg exists
[Sat Dec  3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src19.csv
[Sat Dec  3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Dec  3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src19.csv
[Sat Dec  3 12:28:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Dec  3 12:28:30 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Dec  3 16:57:42 2011] Warning, spatial fit 19 centroid is now closest to src. 86
[Sat Dec  3 16:57:42 2011] Spatial fit model total counts = 3225.800000, observed total counts = 3213.000000
[Sat Dec  3 16:57:42 2011] Offset between fit and detection position for source 22 = 5.892486 pixels
[Sat Dec  3 16:57:42 2011] Warning, changing simple spatial fit ID from 19 to 37
[Sat Dec  3 16:57:42 2011] 3118.245000 total counts/ 2747.600000 bgd. counts: snr = 7.071009
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 5.892486 pixels
  Position = (411.0, 282.8) = 14 45 14.66 -62 20 30.3
  Extent = 15.0 (10.1-18.3)", rotation angle = 0
  Source counts = 370.6 +/- 55.8
  Background counts = 2747.6
  Rate = 0.003 +/- 0.0005
[Sat Dec  3 16:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:42 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:42 2011] Source does appear to be extended
[Sat Dec  3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:42 2011] Source is confused with source 42
[Sun Dec  4 01:59:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 14.96"
[Sun Dec  4 01:59:11 2011] source mask rpix=3.4, npix_max = 62, mask sum = 61, frac = 0.983
[Sun Dec  4 01:59:11 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 14.96"
[Sun Dec  4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src19.ximg exists
[Sun Dec  4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src19.csv
[Sun Dec  4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Dec  4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src19.csv
[Sun Dec  4 08:08:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Dec  4 08:08:36 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Dec  4 15:56:46 2011] Warning, spatial fit 19 centroid is now closest to src. 18
[Sun Dec  4 15:56:46 2011] Spatial fit model total counts = 2855.860000, observed total counts = 2849.000000
[Sun Dec  4 15:56:46 2011] Offset between fit and detection position for source 22 = 3.932235 pixels
[Sun Dec  4 15:56:46 2011] Warning, changing simple spatial fit ID from 19 to 38
[Sun Dec  4 15:56:46 2011] 2557.507000 total counts/ 2371.620000 bgd. counts: snr = 3.817038
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.932235 pixels
  Position = (413.9, 280.1) = 14 45 12.85 -62 20 41.9
  Extent = 22.0 (10.4-44.0)" x 8.2 (3.7-16.2)", rotation angle = 90
  Source counts = 185.9 +/- 50.6
  Background counts = 2371.6
  Rate = 0.002 +/- 0.0004
[Sun Dec  4 15:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:46 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:46 2011] Source does appear to be extended
[Sun Dec  4 15:56:46 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.64
[Sun Dec  4 21:25:42 2011] XMMSAS src. selection expression = ellipse(35959.298000, 24324.054000, 1320.108038, 494.288414, 90.000000, X, Y)
[Sun Dec  4 21:25:42 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src22_src.reg
[Sun Dec  4 21:25:42 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (338, 204) - (490, 356)
[Sun Dec  4 21:25:42 2011] XMMSAS bgd. selection expression = annulus(35959.298000, 24324.054000, 2200.180063, 4400.360127, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(37530.152000, 28998.736000, 1866.528054, 1866.528054, 0.000000, X, Y) && !ellipse(34929.275880, 21478.851800, 916.352026, 916.352026, 0.000000, X, Y) && !ellipse(35132.624400, 22257.633600, 1203.840035, 1203.840035, 0.000000, X, Y) && !ellipse(35121.362000, 21102.330000, 1671.160048, 1671.160048, 0.000000, X, Y) && !ellipse(35523.608400, 27003.546660, 1106.536032, 1106.536032, 0.000000, X, Y) && !ellipse(36693.003400, 28634.271600, 858.200025, 858.200025, 0.000000, X, Y) && !ellipse(35903.496000, 25263.228000, 2393.760069, 2393.760069, 0.000000, X, Y) && !ellipse(37621.397000, 28145.252000, 1497.832043, 1497.832043, 0.000000, X, Y) && !ellipse(37078.278000, 27286.844000, 1804.584052, 1804.584052, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35996.758000, 25675.718000, 1727.880050, 1727.880050, 0.000000, X, Y) && !ellipse(34950.646000, 23169.196000, 1127.728032, 1127.728032, 0.000000, X, Y) && !ellipse(35852.228000, 27463.254000, 1741.040050, 1489.704043, 121.065100, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(36013.321600, 22922.442200, 700.493620, 700.493620, 0.000000, X, Y) && !ellipse(36665.592926, 26921.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35026.478000, 25228.349800, 1993.592057, 1993.592057, 0.000000, X, Y) && !ellipse(36097.445862, 20476.210617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36225.402200, 18542.424200, 1558.872045, 1558.872045, 0.000000, X, Y) && !ellipse(32435.581665, 25995.800140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39225.978000, 28631.232000, 1925.128055, 1925.128055, 0.000000, X, Y) && !ellipse(36680.556671, 23786.600708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37148.940000, 30005.900000, 1809.456052, 842.536024, 47.797400, X, Y) && !ellipse(37296.648254, 24740.576630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32455.663600, 22413.706000, 279.113608, 279.113608, 0.000000, X, Y) && !ellipse(33796.552338, 26814.196991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37642.808319, 25452.254578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36615.322000, 23451.418780, 2023.032058, 1617.592047, 359.900384, X, Y) && !ellipse(33926.069977, 22139.534698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34359.364000, 25273.620000, 890.840026, 890.840026, 0.000000, X, Y) && !ellipse(39925.819800, 24761.933000, 333.776810, 333.776810, 0.000000, X, Y) && !ellipse(37509.661255, 23358.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37226.093506, 22587.801880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36623.887726, 19443.515732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30927.588745, 25164.444092, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 21:25:42 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src22.gif
[Sun Dec  4 21:54:40 2011] Mean detx,y = (-4336.23, 8267.97) 
[Sun Dec  4 21:54:41 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 21:54:58 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 21:54:58 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Dec  4 21:54:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Dec  5 06:51:25 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:25 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Dec  5 06:51:26 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:26 2011] Using photon index=1.80, rate=0.00163, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src22.arf
[Mon Dec  5 06:51:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:26 2011] Updating source flux to 2.5e-14
[Mon Dec  5 06:51:32 2011] Flag c found in src. 22 procflags, skipping spectral fitting