[Fri Dec  2 20:29:44 2011] Detection parameters:
  Position = (411.0, 291.1) = 14 45 14.70 -62 19 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1186.5 +/- 46.1
  Background counts = 119.2
  Rate = 0.02 +/- 0.0006

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 8.18'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 10.52"
[Sat Dec  3 05:48:16 2011] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.028
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 10.52"
[Sat Dec  3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src12.ximg exists
[Sat Dec  3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src12.csv
[Sat Dec  3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Dec  3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src12.csv
[Sat Dec  3 12:28:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Dec  3 12:28:29 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Dec  3 16:57:42 2011] Spatial fit model total counts = 5680.600000, observed total counts = 5689.000000
[Sat Dec  3 16:57:42 2011] Offset between fit and detection position for source 18 = 3.215923 pixels
[Sat Dec  3 16:57:42 2011] 5327.720000 total counts/ 3519.670000 bgd. counts: snr = 30.476105
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.215923 pixels
  Position = (412.4, 293.9) = 14 45 13.83 -62 19 41.9
  Extent = 15.4 (13.9-18.2)", rotation angle = 0
  Source counts = 1808.0 +/- 73.0
  Background counts = 3519.7
  Rate = 0.02 +/- 0.0006
[Sat Dec  3 16:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:42 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:42 2011] Source does appear to be extended
[Sat Dec  3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:42 2011] Source is confused with source 17
[Sun Dec  4 01:59:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 15.44"
[Sun Dec  4 01:59:11 2011] source mask rpix=3.6, npix_max = 65, mask sum = 63, frac = 0.960
[Sun Dec  4 01:59:11 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 15.44"
[Sun Dec  4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src12.ximg exists
[Sun Dec  4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src12.csv
[Sun Dec  4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Dec  4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src12.csv
[Sun Dec  4 08:08:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Dec  4 08:08:36 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Dec  4 15:56:46 2011] Spatial fit model total counts = 10429.300000, observed total counts = 10418.000000
[Sun Dec  4 15:56:46 2011] Offset between fit and detection position for source 18 = 2.005396 pixels
[Sun Dec  4 15:56:46 2011] 9879.620000 total counts/ 8479.460000 bgd. counts: snr = 15.205250
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.005396 pixels
  Position = (411.6, 292.1) = 14 45 14.30 -62 19 50.0
  Extent = 14.3 (13.1-16.0)", rotation angle = 0
  Source counts = 1400.2 +/- 99.4
  Background counts = 8479.5
  Rate = 0.01 +/- 0.0009
[Sun Dec  4 15:56:46 2011] Spatial fit model total counts = 8541.590000, observed total counts = 8554.000000
[Sun Dec  4 15:56:46 2011] Offset between fit and detection position for source 18 = 1.988806 pixels
[Sun Dec  4 15:56:46 2011] Warning, changing simple spatial fit ID from 12 to 19
[Sun Dec  4 15:56:46 2011] 7573.190000 total counts/ 2437.390000 bgd. counts: snr = 104.026884
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.988806 pixels
  Position = (413.2, 290.9) = 14 45 13.28 -62 19 55.0
  Extent = 29.9 (29.9-59.8)", rotation angle = 0
  Source counts = 5135.8 +/- 87.0
  Background counts = 2437.4
  Rate = 0.05 +/- 0.0008
[Sun Dec  4 15:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:46 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:46 2011] Source does appear to be extended
[Sun Dec  4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 21:25:41 2011] Counts = 5135.800000, rescaling region sizes by 2.000000
[Sun Dec  4 21:25:41 2011] XMMSAS src. selection expression = ellipse(35903.496000, 25263.228000, 3590.640103, 3590.640103, 0.000000, X, Y)
[Sun Dec  4 21:25:41 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src18_src.reg
[Sun Dec  4 21:25:41 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (207, 85) - (595, 497)
[Sun Dec  4 21:25:41 2011] XMMSAS bgd. selection expression = annulus(35903.496000, 25263.228000, 11968.800344, 23937.600689, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(37530.152000, 28998.736000, 1866.528054, 1866.528054, 0.000000, X, Y) && !ellipse(38601.258347, 30837.836385, 1723.424050, 869.478952, 93.100524, X, Y) && !ellipse(34929.275880, 21478.851800, 916.352026, 916.352026, 0.000000, X, Y) && !ellipse(35132.624400, 22257.633600, 1203.840035, 1203.840035, 0.000000, X, Y) && !ellipse(35121.362000, 21102.330000, 1671.160048, 1671.160048, 0.000000, X, Y) && !ellipse(35523.608400, 27003.546660, 1106.536032, 1106.536032, 0.000000, X, Y) && !ellipse(38745.298000, 31781.772000, 1944.032056, 1073.568031, 108.757400, X, Y) && !ellipse(36693.003400, 28634.271600, 858.200025, 858.200025, 0.000000, X, Y) && !ellipse(39468.138306, 30669.676544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40129.312000, 31325.222000, 1481.880043, 1481.880043, 0.000000, X, Y) && !ellipse(37621.397000, 28145.252000, 1497.832043, 1497.832043, 0.000000, X, Y) && !ellipse(37078.278000, 27286.844000, 1804.584052, 1804.584052, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35996.758000, 25675.718000, 1727.880050, 1727.880050, 0.000000, X, Y) && !ellipse(34950.646000, 23169.196000, 1127.728032, 1127.728032, 0.000000, X, Y) && !ellipse(35959.298000, 24324.054000, 1760.144051, 659.051219, 90.000000, X, Y) && !ellipse(35852.228000, 27463.254000, 1741.040050, 1489.704043, 121.065100, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(36013.321600, 22922.442200, 700.493620, 700.493620, 0.000000, X, Y) && !ellipse(36665.592926, 26921.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39129.722961, 32467.707520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35026.478000, 25228.349800, 1993.592057, 1993.592057, 0.000000, X, Y) && !ellipse(36097.445862, 20476.210617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41905.958000, 31494.748000, 609.011218, 609.011218, 0.000000, X, Y) && !ellipse(41032.553253, 32229.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36404.741608, 17521.224075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17631.529922, 28294.288208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36225.402200, 18542.424200, 1558.872045, 1558.872045, 0.000000, X, Y) && !ellipse(32435.581665, 25995.800140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39225.978000, 28631.232000, 1925.128055, 1925.128055, 0.000000, X, Y) && !ellipse(41238.208000, 32535.914000, 1932.456056, 1932.456056, 0.000000, X, Y) && !ellipse(21038.795600, 26885.237400, 469.860814, 469.860814, 0.000000, X, Y) && !ellipse(36908.178000, 17327.038600, 1982.976057, 987.416028, 7.422000, X, Y) && !ellipse(41015.383179, 30918.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36680.556671, 23786.600708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28411.545760, 25900.130200, 286.355208, 286.355208, 0.000000, X, Y) && !ellipse(37148.940000, 30005.900000, 1809.456052, 842.536024, 47.797400, X, Y) && !ellipse(37296.648254, 24740.576630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32455.663600, 22413.706000, 279.113608, 279.113608, 0.000000, X, Y) && !ellipse(33796.552338, 26814.196991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36195.138000, 16143.649600, 1620.016047, 1620.016047, 0.000000, X, Y) && !ellipse(37642.808319, 25452.254578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41787.218000, 33103.676000, 2154.472062, 2154.472062, 0.000000, X, Y) && !ellipse(36615.322000, 23451.418780, 2023.032058, 1617.592047, 359.900384, X, Y) && !ellipse(37748.223602, 31688.084717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42387.459839, 31876.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33926.069977, 22139.534698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34359.364000, 25273.620000, 890.840026, 890.840026, 0.000000, X, Y) && !ellipse(22781.773600, 34160.811600, 456.157613, 456.157613, 0.000000, X, Y) && !ellipse(29197.717360, 25536.687000, 517.540015, 517.540015, 0.000000, X, Y) && !ellipse(31025.073460, 23714.502000, 276.064008, 276.064008, 0.000000, X, Y) && !ellipse(23303.773600, 27113.811600, 456.157613, 456.157613, 0.000000, X, Y) && !ellipse(39925.819800, 24761.933000, 333.776810, 333.776810, 0.000000, X, Y) && !ellipse(37886.338226, 16573.795456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27110.369600, 27531.676200, 278.466408, 278.466408, 0.000000, X, Y) && !ellipse(37509.661255, 23358.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37226.093506, 22587.801880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42308.955933, 31138.934387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11416.456802, 22409.298950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15162.603577, 35333.596588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41511.748871, 33435.128510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36226.184000, 30861.852000, 1809.456052, 1809.456052, 0.000000, X, Y) && !ellipse(36623.887726, 19443.515732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26491.957000, 32166.252400, 1327.560038, 627.700018, 336.136215, X, Y) && !ellipse(41296.585297, 30245.485168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30927.588745, 25164.444092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24141.868000, 29620.468200, 1293.760037, 1293.760037, 0.000000, X, Y) && !ellipse(14059.687149, 21974.901642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41785.269989, 22408.393585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41715.503784, 30350.698669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41033.000000, 36358.898000, 2252.752065, 2252.752065, 0.000000, X, Y) && !ellipse(41352.880000, 34430.441740, 1141.032033, 1141.032033, 0.000000, X, Y)
[Sun Dec  4 21:25:41 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src18.gif
[Sun Dec  4 21:41:12 2011] Mean detx,y = (-3310.78, 8669.51) 
[Sun Dec  4 21:41:14 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 21:45:30 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 21:45:31 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Dec  4 21:45:31 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Dec  5 06:51:25 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:25 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Dec  5 06:51:26 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:26 2011] Using photon index=1.80, rate=0.045, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src18.arf
[Mon Dec  5 06:51:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:26 2011] Updating source flux to 5.2e-13
[Mon Dec  5 06:51:32 2011] Flag c found in src. 18 procflags, skipping spectral fitting