[Fri Dec 2 20:29:44 2011] Detection parameters: Position = (454.2, 353.1) = 14 44 47.93 -62 15 24.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 981.1 +/- 47.1 Background counts = 195.7 Rate = 0.02 +/- 0.0008 [Fri Dec 2 20:29:47 2011] Off-axis axis estimate = 11.97' [Sat Dec 3 05:48:16 2011] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting [Sat Dec 3 05:48:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Dec 3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 12.41" [Sat Dec 3 05:48:16 2011] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.934 [Sat Dec 3 05:48:16 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 12.41" [Sat Dec 3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src10.ximg exists [Sat Dec 3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src10.csv [Sat Dec 3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src10_1.ximg exists [Sat Dec 3 12:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src10.csv [Sat Dec 3 12:28:28 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Sat Dec 3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Sat Dec 3 12:28:29 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly [Sat Dec 3 16:57:42 2011] Source 12 is offset by -2.597951 and -1.105327 pixels which is larger than 2 X fitted extent = 1.414023 x 1.414023, not incorporating fit results [Sat Dec 3 16:57:42 2011] Warning, spatial fit 10 centroid is now closest to src. 10 [Sat Dec 3 16:57:42 2011] Source 12 is offset by 8.698424 and 4.518535 pixels which is larger than 2 X fitted extent = 8.452552 x 8.452552, not incorporating fit results [Sat Dec 3 16:57:42 2011] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 10.317339 pixels away [Sat Dec 3 16:57:42 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 16:57:42 2011] Assessing source extent using major [Sat Dec 3 16:57:42 2011] Source does appear to be extended [Sat Dec 3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 3 16:57:42 2011] Source is confused with source 10 [Sun Dec 4 01:59:11 2011] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting [Sun Dec 4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 12.41" [Sun Dec 4 01:59:11 2011] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.934 [Sun Dec 4 01:59:11 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 12.41" [Sun Dec 4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src10.ximg exists [Sun Dec 4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src10.csv [Sun Dec 4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src10_1.ximg exists [Sun Dec 4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src10.csv [Sun Dec 4 08:08:35 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Dec 4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Sun Dec 4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Sun Dec 4 08:08:36 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly [Sun Dec 4 15:56:46 2011] Warning, spatial fit 10 centroid is now closest to src. 10 [Sun Dec 4 15:56:46 2011] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.000837 pixels away [Sun Dec 4 15:56:46 2011] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 20.889766 pixels away [Sun Dec 4 15:56:46 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 15:56:46 2011] Assessing source extent using major [Sun Dec 4 15:56:46 2011] Source does appear to be extended [Sun Dec 4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 4 21:25:41 2011] XMMSAS src. selection expression = ellipse(39468.138306, 30669.676544, 652.500000, 652.500000, 0.000000, X, Y) [Sun Dec 4 21:25:41 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src12_src.reg [Sun Dec 4 21:25:41 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (417, 316) - (492, 391) [Sun Dec 4 21:25:41 2011] XMMSAS bgd. selection expression = annulus(39468.138306, 30669.676544, 1087.500000, 2175.000000, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(37530.152000, 28998.736000, 1866.528054, 1866.528054, 0.000000, X, Y) && !ellipse(38601.258347, 30837.836385, 1723.424050, 869.478952, 93.100524, X, Y) && !ellipse(38745.298000, 31781.772000, 1944.032056, 1073.568031, 108.757400, X, Y) && !ellipse(36693.003400, 28634.271600, 858.200025, 858.200025, 0.000000, X, Y) && !ellipse(40129.312000, 31325.222000, 1481.880043, 1481.880043, 0.000000, X, Y) && !ellipse(37621.397000, 28145.252000, 1497.832043, 1497.832043, 0.000000, X, Y) && !ellipse(37078.278000, 27286.844000, 1804.584052, 1804.584052, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35852.228000, 27463.254000, 1741.040050, 1489.704043, 121.065100, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(39129.722961, 32467.707520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41905.958000, 31494.748000, 609.011218, 609.011218, 0.000000, X, Y) && !ellipse(41032.553253, 32229.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39225.978000, 28631.232000, 1925.128055, 1925.128055, 0.000000, X, Y) && !ellipse(41238.208000, 32535.914000, 1932.456056, 1932.456056, 0.000000, X, Y) && !ellipse(41015.383179, 30918.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37148.940000, 30005.900000, 1809.456052, 842.536024, 47.797400, X, Y) && !ellipse(41787.218000, 33103.676000, 2154.472062, 2154.472062, 0.000000, X, Y) && !ellipse(37748.223602, 31688.084717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42387.459839, 31876.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42308.955933, 31138.934387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41511.748871, 33435.128510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36226.184000, 30861.852000, 1809.456052, 1809.456052, 0.000000, X, Y) && !ellipse(41296.585297, 30245.485168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41715.503784, 30350.698669, 870.000000, 870.000000, 0.000000, X, Y) [Sun Dec 4 21:25:41 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src12.gif [Sun Dec 4 21:40:22 2011] Mean detx,y = (1358.09, 12683.33) [Sun Dec 4 21:40:22 2011] Setting backscal keywords in source and bgd. spectrum [Sun Dec 4 21:40:35 2011] Binned source spectrum to 10 counts/bin [Sun Dec 4 21:40:35 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src12_src_b10.pi.gz [Sun Dec 4 21:40:35 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src12_bgd.pi.gz [Sun Dec 4 22:55:51 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Dec 4 22:55:51 2011] rmf not generated due to insufficient counts [Mon Dec 5 06:51:25 2011] Updating aperture counts using extracted products [Mon Dec 5 06:51:25 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src12_src_b10.pi.gz [Mon Dec 5 06:51:26 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 06:51:26 2011] Using photon index=1.80, rate=0.016, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src12.arf [Mon Dec 5 06:51:26 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 06:51:26 2011] Updating source flux to 2.8e-13 [Mon Dec 5 06:51:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting