[Fri Dec  2 20:29:43 2011] Detection parameters:
  Position = (459.2, 360.0) = 14 44 44.86 -62 14 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 939.3 +/- 46.0
  Background counts = 187.7
  Rate = 0.02 +/- 0.0008

[Fri Dec  2 20:29:47 2011] Off-axis axis estimate = 12.48'
[Sat Dec  3 05:48:16 2011] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 05:48:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec  3 05:48:16 2011] Initial guess for spatial extent in simple fitting = 12.67"
[Sat Dec  3 05:48:16 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Sat Dec  3 05:48:16 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 12.67"
[Sat Dec  3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Dec  3 12:28:28 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Dec  3 12:28:28 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_src11 appears to have run properly
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Dec  3 12:28:29 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Dec  3 12:28:29 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Dec  3 16:57:42 2011] Spatial fit model total counts = 7766.650000, observed total counts = 7769.000000
[Sat Dec  3 16:57:42 2011] Offset between fit and detection position for source 10 = 1.948550 pixels
[Sat Dec  3 16:57:42 2011] Warning, changing simple spatial fit ID from 11 to 10
[Sat Dec  3 16:57:42 2011] 7368.260000 total counts/ 5192.680000 bgd. counts: snr = 30.191124
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.948550 pixels
  Position = (460.4, 358.4) = 14 44 44.11 -62 15 0.2
  Extent = 24.8 (24.7-49.7)", rotation angle = 0
  Source counts = 2175.6 +/- 85.8
  Background counts = 5192.7
  Rate = 0.02 +/- 0.0008
[Sat Dec  3 16:57:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 16:57:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 16:57:42 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 16:57:42 2011] Source does appear to be extended
[Sat Dec  3 16:57:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:57:42 2011] Source is confused with source 21
[Sun Dec  4 01:59:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec  4 01:59:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec  4 01:59:11 2011] Initial guess for spatial extent in simple fitting = 24.83"
[Sun Dec  4 01:59:11 2011] source mask rpix=5.7, npix_max = 154, mask sum = 169, frac = 1.097
[Sun Dec  4 01:59:11 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 24.83"
[Sun Dec  4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src11.ximg exists
[Sun Dec  4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src11.csv
[Sun Dec  4 08:08:35 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Dec  4 08:08:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src11.csv
[Sun Dec  4 08:08:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Dec  4 08:08:36 2011] fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Dec  4 08:08:36 2011] Fit fullrun_mos1_xmm0504810101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Dec  4 15:56:46 2011] Spatial fit model total counts = 13792.200000, observed total counts = 13777.000000
[Sun Dec  4 15:56:46 2011] Offset between fit and detection position for source 10 = 2.536869 pixels
[Sun Dec  4 15:56:46 2011] Warning, changing simple spatial fit ID from 11 to 10
[Sun Dec  4 15:56:46 2011] 12999.200000 total counts/ 10438.400000 bgd. counts: snr = 25.064480
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.536869 pixels
  Position = (462.6, 359.6) = 14 44 42.72 -62 14 55.0
  Extent = 24.8 (24.8-49.7)", rotation angle = 0
  Source counts = 2560.8 +/- 114.0
  Background counts = 10438.4
  Rate = 0.02 +/- 0.001
[Sun Dec  4 15:56:46 2011] Spatial fit model total counts = 23778.000000, observed total counts = 23775.000000
[Sun Dec  4 15:56:46 2011] Offset between fit and detection position for source 10 = 2.263725 pixels
[Sun Dec  4 15:56:46 2011] Warning, changing simple spatial fit ID from 10 to 34
[Sun Dec  4 15:56:46 2011] 23551.040000 total counts/ 9502.740000 bgd. counts: snr = 144.111736
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.263725 pixels
  Position = (463.7, 361.6) = 14 44 42.06 -62 14 46.3
  Extent = 53.8 (53.7-107.6)", rotation angle = 0
  Source counts = 14048.3 +/- 153.5
  Background counts = 9502.7
  Rate = 0.1 +/- 0.001
[Sun Dec  4 15:56:46 2011] Spatial fit model total counts = 5492.360000, observed total counts = 5498.000000
[Sun Dec  4 15:56:46 2011] Offset between fit and detection position for source 10 = 2.132267 pixels
[Sun Dec  4 15:56:46 2011] Warning, changing simple spatial fit ID from 34 to 37
[Sun Dec  4 15:56:46 2011] 5061.367000 total counts/ 4317.480000 bgd. counts: snr = 11.321183
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.132267 pixels
  Position = (461.8, 360.6) = 14 44 43.23 -62 14 50.7
  Extent = 18.5 (12.3-25.7)", rotation angle = 0
  Source counts = 743.9 +/- 71.1
  Background counts = 4317.5
  Rate = 0.007 +/- 0.0006
[Sun Dec  4 15:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 15:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 15:56:46 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 15:56:46 2011] Source does appear to be extended
[Sun Dec  4 15:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 21:25:41 2011] XMMSAS src. selection expression = ellipse(40129.312000, 31325.222000, 1111.410032, 1111.410032, 0.000000, X, Y)
[Sun Dec  4 21:25:41 2011] Writing source region out to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src10_src.reg
[Sun Dec  4 21:25:41 2011] Extracting stamp from image fullrun_mos1_xmm0504810101_pi300-10000_cl_sm2.00.img.gz, (398, 297) - (526, 424)
[Sun Dec  4 21:25:41 2011] XMMSAS bgd. selection expression = annulus(40129.312000, 31325.222000, 1852.350053, 3704.700107, X, Y) && !ellipse(37819.856000, 29118.706000, 2422.640070, 2422.640070, 0.000000, X, Y) && !ellipse(37530.152000, 28998.736000, 1866.528054, 1866.528054, 0.000000, X, Y) && !ellipse(38601.258347, 30837.836385, 1723.424050, 869.478952, 93.100524, X, Y) && !ellipse(35523.608400, 27003.546660, 1106.536032, 1106.536032, 0.000000, X, Y) && !ellipse(38745.298000, 31781.772000, 1944.032056, 1073.568031, 108.757400, X, Y) && !ellipse(36693.003400, 28634.271600, 858.200025, 858.200025, 0.000000, X, Y) && !ellipse(39468.138306, 30669.676544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35903.496000, 25263.228000, 2393.760069, 2393.760069, 0.000000, X, Y) && !ellipse(37621.397000, 28145.252000, 1497.832043, 1497.832043, 0.000000, X, Y) && !ellipse(37078.278000, 27286.844000, 1804.584052, 1804.584052, 0.000000, X, Y) && !ellipse(37655.402000, 28698.794000, 10827.504312, 10827.504312, 0.000000, X, Y) && !ellipse(38647.862000, 30513.548000, 11916.336343, 11916.336343, 0.000000, X, Y) && !ellipse(35852.228000, 27463.254000, 1741.040050, 1489.704043, 121.065100, X, Y) && !ellipse(35729.594000, 19433.326000, 9353.232269, 9353.232269, 0.000000, X, Y) && !ellipse(36665.592926, 26921.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39129.722961, 32467.707520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41905.958000, 31494.748000, 609.011218, 609.011218, 0.000000, X, Y) && !ellipse(41032.553253, 32229.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39225.978000, 28631.232000, 1925.128055, 1925.128055, 0.000000, X, Y) && !ellipse(41238.208000, 32535.914000, 1932.456056, 1932.456056, 0.000000, X, Y) && !ellipse(41015.383179, 30918.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37148.940000, 30005.900000, 1809.456052, 842.536024, 47.797400, X, Y) && !ellipse(41787.218000, 33103.676000, 2154.472062, 2154.472062, 0.000000, X, Y) && !ellipse(37748.223602, 31688.084717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42387.459839, 31876.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42308.955933, 31138.934387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41511.748871, 33435.128510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36226.184000, 30861.852000, 1809.456052, 1809.456052, 0.000000, X, Y) && !ellipse(41296.585297, 30245.485168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41715.503784, 30350.698669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41033.000000, 36358.898000, 2252.752065, 2252.752065, 0.000000, X, Y) && !ellipse(41352.880000, 34430.441740, 1141.032033, 1141.032033, 0.000000, X, Y)
[Sun Dec  4 21:25:41 2011] Writing fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src10.gif
[Sun Dec  4 21:40:40 2011] Mean detx,y = (1893.16, 13395.77) 
[Sun Dec  4 21:40:41 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 21:41:00 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 21:41:00 2011] Setting source spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Dec  4 21:41:00 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Dec  5 06:51:25 2011] Updating aperture counts using extracted products
[Mon Dec  5 06:51:25 2011] Error reading totcts from fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Dec  5 06:51:26 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 06:51:26 2011] Using photon index=1.80, rate=0.00652, arf fullrun_mos1_xmm0504810101_pi300-10000_pass1_cl_src10.arf
[Mon Dec  5 06:51:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 06:51:26 2011] Updating source flux to 1.1e-13
[Mon Dec  5 06:51:32 2011] Flag c found in src. 10 procflags, skipping spectral fitting