[Wed Aug 15 10:22:13 2012] Detection parameters:
  Position = (313.6, 323.2) = 12 53 2.95 -9 12 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 526.4 +/- 31.9
  Background counts = 64.0
  Rate = 0.02 +/- 0.0009

[Wed Aug 15 10:22:14 2012] Off-axis axis estimate = 2.11'
[Wed Aug 15 12:17:26 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 12:17:26 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Aug 15 12:17:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.659
[Wed Aug 15 12:17:26 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.48"
[Wed Aug 15 13:12:16 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 15 13:12:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 13:12:16 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 15 13:12:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 13:12:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:12:17 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 15 13:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 15 13:12:17 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 15 13:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 15 13:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:12:38 2012] Warning, spatial fit 3 centroid is now closest to src. 6
[Wed Aug 15 13:12:38 2012] Spatial fit model total counts = 2226.650000, observed total counts = 2068.000000
[Wed Aug 15 13:12:38 2012] Offset between fit and detection position for source 4 = 9.503506 pixels
[Wed Aug 15 13:12:38 2012] Warning, changing simple spatial fit ID from 3 to 5
[Wed Aug 15 13:12:38 2012] 2194.085000 total counts/ 1914.340000 bgd. counts: snr = 6.393708
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 9.503506 pixels
  Position = (306.8, 316.6) = 12 53 4.96 -9 12 33.3
  Extent = 19.4" x 16.7", rotation angle = 0
  Source counts = 279.7 +/- 46.8
  Background counts = 1914.3
  Rate = 0.008 +/- 0.001
[Wed Aug 15 13:12:38 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:12:38 2012] Assessing source extent using major
[Wed Aug 15 13:12:38 2012] Source does appear to be extended
[Wed Aug 15 13:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.16
[Wed Aug 15 13:12:38 2012] Source is confused with source 2
[Wed Aug 15 15:09:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 15:09:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 15:09:58 2012] Initial guess for spatial extent in simple fitting = 18.06"
[Wed Aug 15 15:09:58 2012] source mask rpix=4.2, npix_max = 86, mask sum = 79, frac = 0.913
[Wed Aug 15 15:09:58 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 18.06"
[Wed Aug 15 16:06:57 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 15 16:06:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780601_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 16:06:57 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 15 16:06:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780601_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 16:06:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 16:06:58 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 15 16:06:58 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 15 16:06:58 2012] Fit fullrun_mos2_xmm0504780601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 15 16:07:13 2012] Spatial fit model total counts = 11767.900000, observed total counts = 11191.000000
[Wed Aug 15 16:07:13 2012] Offset between fit and detection position for source 4 = 5.383866 pixels
[Wed Aug 15 16:07:13 2012] 11497.980000 total counts/ 6085.610000 bgd. counts: snr = 69.380180
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 5.383866 pixels
  Position = (303.9, 321.2) = 12 53 5.79 -9 12 13.4
  Extent = 15.8 (14.9-16.8)", rotation angle = 0
  Source counts = 5412.4 +/- 107.2
  Background counts = 6085.6
  Rate = 0.2 +/- 0.003
[Wed Aug 15 16:07:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 16:07:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 16:07:13 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 16:07:13 2012] Source does appear to be extended
[Wed Aug 15 16:07:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 11:22:44 2012] Counts = 5412.370000, rescaling region sizes by 2.000000
[Thu Aug 16 11:22:44 2012] XMMSAS src. selection expression = ellipse(26393.910000, 27897.582000, 1891.356054, 1891.356054, 0.000000, X, Y)
[Thu Aug 16 11:22:44 2012] Writing source region out to fullrun_mos2_xmm0504780601_pi300-10000_pass1_cl_src4_src.reg
[Thu Aug 16 11:22:44 2012] Extracting stamp from image fullrun_mos2_xmm0504780601_pi300-10000_cl_sm2.00.img.gz, (195, 213) - (413, 430)
[Thu Aug 16 11:22:44 2012] XMMSAS bgd. selection expression = annulus(26393.910000, 27897.582000, 6304.520181, 12609.040363, X, Y) && !ellipse(26402.199800, 27908.998400, 1503.944043, 1252.640036, 351.780285, X, Y) && !ellipse(31971.933899, 22513.952240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.394653, 26659.671631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30209.395355, 19352.100418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26850.015860, 26141.292600, 311.772809, 264.336808, 89.154429, X, Y) && !ellipse(32848.202423, 20559.573227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33577.565521, 40204.980621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27541.228973, 27303.046295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.071281, 33036.465400, 414.014412, 414.014412, 0.000000, X, Y) && !ellipse(14933.119580, 27265.506600, 439.972013, 439.972013, 0.000000, X, Y) && !ellipse(28029.464966, 29181.474213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.975311, 27558.221161, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 11:22:44 2012] Writing fullrun_mos2_xmm0504780601_pi300-10000_pass1_cl_src4.gif
[Thu Aug 16 11:29:08 2012] Mean detx,y = (28.26, -72.06) 
[Thu Aug 16 11:29:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 11:35:30 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 11:35:30 2012] Setting source spectrum file to fullrun_mos2_xmm0504780601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Aug 16 11:35:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Aug 16 11:53:26 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:53:26 2012] Error reading totcts from fullrun_mos2_xmm0504780601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Aug 16 11:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:53:26 2012] Using photon index=1.80, rate=0.151, arf fullrun_mos2_xmm0504780601_pi300-10000_pass1_cl_src4.arf
[Thu Aug 16 11:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:53:26 2012] Updating source flux to 1.4e-12
[Thu Aug 16 11:54:15 2012] Flag c found in src. 4 procflags, skipping spectral fitting