[Wed Aug 15 10:22:13 2012] Detection parameters:
  Position = (324.6, 307.1) = 12 52 59.71 -9 13 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.4 +/- 16.2
  Background counts = 61.5
  Rate = 0.002 +/- 0.0004

[Wed Aug 15 10:22:14 2012] Off-axis axis estimate = 2.00'
[Wed Aug 15 12:17:26 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 12:17:26 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Wed Aug 15 12:17:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.026
[Wed Aug 15 12:17:26 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 7.43"
[Wed Aug 15 13:12:17 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_src22.ximg exists
[Wed Aug 15 13:12:17 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Aug 15 13:12:17 2012] Fit fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_src22 appears to have run properly
[Wed Aug 15 13:12:17 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Aug 15 13:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed Aug 15 13:12:17 2012] fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Aug 15 13:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed Aug 15 13:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:12:38 2012] Spatial fit model total counts = 2482.060000, observed total counts = 2206.000000
[Wed Aug 15 13:12:38 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 13:12:38 2012] Spatial fit model total counts = 1085.370000, observed total counts = 994.000000
[Wed Aug 15 13:12:38 2012] Offset between fit and detection position for source 22 = 0.427191 pixels
[Wed Aug 15 13:12:38 2012] 1063.202300 total counts/ 1052.270000 bgd. counts: snr = 0.337014
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.427191 pixels
  Position = (324.9, 306.8) = 12 52 59.63 -9 13 16.2
  Extent = 3.1" x 2.3", rotation angle = 90
  Source counts = 10.9 +/- 32.6
  Background counts = 1052.3
  Rate = 0.0003 +/- 0.0009
  Deleting source due to low Poisson probability