[Wed Aug 15 10:21:36 2012] Detection parameters:
  Position = (309.1, 301.1) = 12 53 4.26 -9 13 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 409.2 +/- 28.4
  Background counts = 64.6
  Rate = 0.01 +/- 0.0008

[Wed Aug 15 10:21:36 2012] Off-axis axis estimate = 0.80'
[Wed Aug 15 11:37:53 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 11:37:53 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Wed Aug 15 11:37:53 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.934
[Wed Aug 15 11:37:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.83"
[Wed Aug 15 12:17:25 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 15 12:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 12:17:25 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 15 12:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 12:17:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 12:17:26 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 15 12:17:26 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 15 12:17:26 2012] Fit fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug 15 13:12:33 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Wed Aug 15 13:12:33 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:12:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:12:33 2012] Assessing source extent using major
[Wed Aug 15 13:12:33 2012] Source does appear to be extended
[Wed Aug 15 13:12:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 14:40:14 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 14:40:14 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Wed Aug 15 14:40:14 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.934
[Wed Aug 15 14:40:14 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.83"
[Wed Aug 15 15:09:57 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 15 15:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 15:09:57 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 15 15:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 15:09:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:09:58 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 15 15:09:58 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 15 15:09:58 2012] Fit fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 15 16:07:09 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Wed Aug 15 16:07:09 2012] Source 3 is offset by -7.222606 and 3.636077 pixels which is larger than
2 X fitted extent = 6.787265 x 2.417195, not incorporating fit results
[Wed Aug 15 16:07:09 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 16:07:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 16:07:09 2012] Assessing source extent using major
[Wed Aug 15 16:07:09 2012] Source does appear to be extended
[Wed Aug 15 16:07:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 10:27:09 2012] XMMSAS src. selection expression = ellipse(26846.673309, 26143.966705, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 10:27:09 2012] Writing source region out to fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src3_src.reg
[Thu Aug 16 10:27:09 2012] Extracting stamp from image fullrun_mos1_xmm0504780601_pi300-10000_cl_sm2.00.img.gz, (272, 264) - (347, 339)
[Thu Aug 16 10:27:09 2012] XMMSAS bgd. selection expression = annulus(26846.673309, 26143.966705, 1087.500000, 2175.000000, X, Y) && !ellipse(26434.857800, 27909.949400, 1155.537209, 1155.537209, 0.000000, X, Y) && !ellipse(27380.746000, 26736.254000, 285.595208, 285.595208, 0.000000, X, Y) && !ellipse(24297.426000, 29516.942000, 1247.896036, 1247.896036, 0.000000, X, Y) && !ellipse(28228.427551, 27100.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28460.960327, 27889.228973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28183.266000, 25303.278000, 1148.440033, 1148.440033, 0.000000, X, Y)
[Thu Aug 16 10:27:09 2012] Writing fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src3.gif
[Thu Aug 16 10:34:11 2012] Mean detx,y = (-1481.61, -420.88) 
[Thu Aug 16 10:34:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 10:34:24 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 10:34:24 2012] Setting source spectrum file to fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 10:34:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Aug 16 11:11:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 11:11:54 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:53:25 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:53:25 2012] Error reading totcts from fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 11:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:53:26 2012] Using photon index=1.80, rate=0.0114, arf fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src3.arf
[Thu Aug 16 11:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:53:26 2012] Updating source flux to 1.2e-13
[Thu Aug 16 11:53:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting