[Wed Aug 15 10:21:36 2012] Detection parameters:
  Position = (325.0, 312.1) = 12 52 59.60 -9 12 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.1 +/- 16.3
  Background counts = 64.3
  Rate = 0.002 +/- 0.0004

[Wed Aug 15 10:21:37 2012] Off-axis axis estimate = 2.17'
[Wed Aug 15 11:37:53 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 11:37:53 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Aug 15 11:37:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Wed Aug 15 11:37:53 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.51"
[Wed Aug 15 12:17:26 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src15.ximg exists
[Wed Aug 15 12:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src15.csv
[Wed Aug 15 12:17:26 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Aug 15 12:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src15.csv
[Wed Aug 15 12:17:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 12:17:26 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Aug 15 12:17:26 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Aug 15 12:17:26 2012] Fit fullrun_mos1_xmm0504780601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Aug 15 13:12:33 2012] Source 12 is offset by 6.929167 and 3.408112 pixels which is larger than
2 X fitted extent = 3.978681 x 3.978681, not incorporating fit results
[Wed Aug 15 13:12:33 2012] Source 12 is offset by 3.864110 and -3.646279 pixels which is larger than
2 X fitted extent = 1.990051 x 1.990051, not incorporating fit results
[Wed Aug 15 13:12:33 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:12:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:12:33 2012] Assessing source extent using major
[Wed Aug 15 13:12:33 2012] Source does appear to be extended
[Wed Aug 15 13:12:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 14:40:14 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 14:40:14 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Aug 15 14:40:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Wed Aug 15 14:40:14 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.51"
[Wed Aug 15 15:09:57 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src13.ximg exists
[Wed Aug 15 15:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src13.csv
[Wed Aug 15 15:09:57 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Aug 15 15:09:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src13.csv
[Wed Aug 15 15:09:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:09:58 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Aug 15 15:09:58 2012] fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Aug 15 15:09:58 2012] Fit fullrun_mos1_xmm0504780601_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Aug 15 16:07:09 2012] Source 12 is offset by 6.928593 and -5.545222 pixels which is larger than
2 X fitted extent = 0.929798 x 0.929798, not incorporating fit results
[Wed Aug 15 16:07:09 2012] Source 12 is offset by 3.885696 and -3.656946 pixels which is larger than
2 X fitted extent = 2.084349 x 2.084349, not incorporating fit results
[Wed Aug 15 16:07:09 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 16:07:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 16:07:09 2012] Assessing source extent using major
[Wed Aug 15 16:07:09 2012] Source does appear to be extended
[Wed Aug 15 16:07:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 10:27:09 2012] XMMSAS src. selection expression = ellipse(28228.427551, 27100.281708, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 10:27:09 2012] Writing source region out to fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src12_src.reg
[Thu Aug 16 10:27:09 2012] Extracting stamp from image fullrun_mos1_xmm0504780601_pi300-10000_cl_sm2.00.img.gz, (288, 275) - (363, 350)
[Thu Aug 16 10:27:09 2012] XMMSAS bgd. selection expression = annulus(28228.427551, 27100.281708, 1087.500000, 2175.000000, X, Y) && !ellipse(26434.857800, 27909.949400, 1155.537209, 1155.537209, 0.000000, X, Y) && !ellipse(27380.746000, 26736.254000, 285.595208, 285.595208, 0.000000, X, Y) && !ellipse(26846.673309, 26143.966705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.226288, 29200.986023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28460.960327, 27889.228973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28183.266000, 25303.278000, 1148.440033, 1148.440033, 0.000000, X, Y)
[Thu Aug 16 10:27:09 2012] Writing fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src12.gif
[Thu Aug 16 10:38:28 2012] Mean detx,y = (-1138.81, 1129.22) 
[Thu Aug 16 10:38:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 10:38:44 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 10:38:45 2012] Setting source spectrum file to fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Aug 16 10:38:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Aug 16 11:22:13 2012] Not generating rmf since there are only 77 counts
[Thu Aug 16 11:22:13 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:53:26 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:53:26 2012] Error reading totcts from fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Aug 16 11:53:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:53:26 2012] Using photon index=1.80, rate=0.00211, arf fullrun_mos1_xmm0504780601_pi300-10000_pass1_cl_src12.arf
[Thu Aug 16 11:53:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:53:26 2012] Updating source flux to 2.1e-14
[Thu Aug 16 11:53:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting