[Sun Mar 25 02:46:10 2012] Detection parameters:
  Position = (330.3, 325.0) = 12 52 58.18 -9 11 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 403.0 +/- 41.3
  Background counts = 493.8
  Rate = 0.004 +/- 0.0004

[Sun Mar 25 02:46:13 2012] Off-axis axis estimate = 3.01'
[Sun Mar 25 02:57:19 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 02:57:19 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Sun Mar 25 02:57:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.926
[Sun Mar 25 02:57:19 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 7.93"
[Sun Mar 25 07:04:37 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src51.ximg exists
[Sun Mar 25 07:04:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src51.csv
[Sun Mar 25 07:04:37 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src51_1.ximg exists
[Sun Mar 25 07:04:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src51.csv
[Sun Mar 25 07:04:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 07:04:38 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sun Mar 25 07:04:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src51.csv
[Sun Mar 25 07:04:38 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sun Mar 25 07:04:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src51.csv
[Sun Mar 25 07:04:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:52 2012] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 12.850237 pixels away
[Sun Mar 25 11:14:52 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:14:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:14:52 2012] Assessing source extent using major
[Sun Mar 25 11:14:52 2012] Source does appear to be extended
[Sun Mar 25 11:14:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 11:15:46 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:15:46 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Sun Mar 25 11:15:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.926
[Sun Mar 25 11:15:46 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 7.93"
[Sun Mar 25 15:48:44 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src51.ximg exists
[Sun Mar 25 15:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src51.csv
[Sun Mar 25 15:48:44 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Mar 25 15:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src51.csv
[Sun Mar 25 15:48:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 15:48:45 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Mar 25 15:48:45 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Mar 25 15:48:45 2012] Fit fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sun Mar 25 20:24:04 2012] Source 57 is offset by 6.769643 and 2.256577 pixels which is larger than
2 X fitted extent = 2.712612 x 2.712612, not incorporating fit results
[Sun Mar 25 20:24:04 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 14.485359 pixels away
[Sun Mar 25 20:24:05 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:05 2012] Assessing source extent using major
[Sun Mar 25 20:24:05 2012] Source does appear to be extended
[Sun Mar 25 20:24:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:24:59 2012] XMMSAS src. selection expression = ellipse(28687.136963, 28230.708221, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 20:24:59 2012] Writing source region out to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src57_src.reg
[Sun Mar 25 20:24:59 2012] Extracting stamp from image fullrun_pn_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (293, 288) - (368, 363)
[Sun Mar 25 20:24:59 2012] XMMSAS bgd. selection expression = annulus(28687.136963, 28230.708221, 1087.500000, 2175.000000, X, Y) && !ellipse(26419.207180, 27874.976400, 3490.272100, 3490.272100, 0.000000, X, Y) && !ellipse(27442.476400, 26683.084000, 356.552810, 356.552810, 0.000000, X, Y) && !ellipse(26605.981628, 29447.009003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28025.084167, 29141.399200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25984.803009, 29111.246033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26890.946000, 26176.610000, 308.506409, 308.506409, 0.000000, X, Y) && !ellipse(26182.005310, 30150.469635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29298.110000, 26615.340000, 1217.480035, 1217.480035, 0.000000, X, Y) && !ellipse(28051.347717, 25275.506622, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 20:24:59 2012] Writing fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src57.gif
[Sun Mar 25 22:19:17 2012] Mean detx,y = (2328.21, 387.77) 
[Sun Mar 25 22:19:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 22:19:52 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 22:19:52 2012] Setting source spectrum file to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sun Mar 25 22:19:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Mon Mar 26 15:07:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 15:07:39 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:35 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:35 2012] Error reading totcts from fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Mar 26 22:49:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:40 2012] Using photon index=1.80, rate=0.00417, arf fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src57.arf
[Mon Mar 26 22:49:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:40 2012] Updating source flux to 1e-14
[Mon Mar 26 23:01:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting