[Sun Mar 25 02:46:09 2012] Detection parameters:
  Position = (314.8, 405.6) = 12 53 2.72 -9 6 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.3 +/- 27.8
  Background counts = 321.3
  Rate = 0.003 +/- 0.0004

[Sun Mar 25 02:46:13 2012] Off-axis axis estimate = 7.86'
[Sun Mar 25 02:57:19 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 02:57:19 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Sun Mar 25 02:57:19 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Sun Mar 25 02:57:19 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 10.36"
[Sun Mar 25 07:04:37 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src41.ximg exists
[Sun Mar 25 07:04:37 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Mar 25 07:04:37 2012] Fit fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src41 appears to have run properly
[Sun Mar 25 07:04:38 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Mar 25 07:04:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Mar 25 07:04:38 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Mar 25 07:04:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Mar 25 07:04:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:52 2012] Source 46 is offset by -1.360748 and 1.431584 pixels which is larger than
2 X fitted extent = 1.233839 x 1.233839, not incorporating fit results
[Sun Mar 25 11:14:52 2012] Warning, spatial fit 41 centroid is now closest to src. 44
[Sun Mar 25 11:14:52 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:14:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:14:52 2012] Assessing source extent using major
[Sun Mar 25 11:14:52 2012] Source does appear to be extended
[Sun Mar 25 11:14:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 11:15:46 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:15:46 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Sun Mar 25 11:15:46 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Sun Mar 25 11:15:46 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 10.36"
[Sun Mar 25 15:48:44 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src41.ximg exists
[Sun Mar 25 15:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src41.csv
[Sun Mar 25 15:48:44 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src41_1.ximg exists
[Sun Mar 25 15:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src41.csv
[Sun Mar 25 15:48:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 15:48:45 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sun Mar 25 15:48:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun Mar 25 15:48:45 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sun Mar 25 15:48:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun Mar 25 15:48:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:24:04 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 18.463240 pixels away
[Sun Mar 25 20:24:04 2012] Source 46 is offset by -1.359667 and 1.431699 pixels which is larger than
2 X fitted extent = 1.233784 x 1.233784, not incorporating fit results
[Sun Mar 25 20:24:04 2012] Spatial fit model total counts = 2142.040000, observed total counts = 1696.000000
[Sun Mar 25 20:24:04 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 20:24:05 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:05 2012] Assessing source extent using major
[Sun Mar 25 20:24:05 2012] Source does appear to be extended
[Sun Mar 25 20:24:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:24:59 2012] XMMSAS src. selection expression = ellipse(27341.838928, 35237.197784, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 20:24:59 2012] Writing source region out to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src46_src.reg
[Sun Mar 25 20:24:59 2012] Extracting stamp from image fullrun_pn_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (277, 368) - (352, 443)
[Sun Mar 25 20:24:59 2012] XMMSAS bgd. selection expression = annulus(27341.838928, 35237.197784, 1087.500000, 2175.000000, X, Y) && !ellipse(26771.735400, 36888.883200, 419.574412, 419.574412, 0.000000, X, Y) && !ellipse(28338.659058, 35917.575592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27028.654327, 32714.054413, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 20:24:59 2012] Writing fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src46.gif
[Sun Mar 25 22:05:25 2012] Mean detx,y = (3845.43, -6597.41) 
[Sun Mar 25 22:05:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 22:06:09 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 22:06:09 2012] Setting source spectrum file to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sun Mar 25 22:06:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Mon Mar 26 14:51:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 14:51:17 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:34 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:34 2012] Error reading totcts from fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon Mar 26 22:49:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:39 2012] Using photon index=1.80, rate=0.00273, arf fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src46.arf
[Mon Mar 26 22:49:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:39 2012] Updating source flux to 1.1e-14
[Mon Mar 26 23:01:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting