[Sun Mar 25 02:46:06 2012] Detection parameters:
  Position = (299.2, 335.2) = 12 53 7.30 -9 11 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1186.1 +/- 50.8
  Background counts = 483.6
  Rate = 0.02 +/- 0.0007

[Sun Mar 25 02:46:13 2012] Off-axis axis estimate = 2.66'
[Sun Mar 25 02:57:19 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 02:57:19 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Sun Mar 25 02:57:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.815
[Sun Mar 25 02:57:19 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.76"
[Sun Mar 25 07:04:37 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src24.ximg exists
[Sun Mar 25 07:04:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src24.csv
[Sun Mar 25 07:04:37 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Mar 25 07:04:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src24.csv
[Sun Mar 25 07:04:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 07:04:38 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Mar 25 07:04:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Mar 25 07:04:38 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Mar 25 07:04:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Mar 25 07:04:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:52 2012] Spatial fit model total counts = 8073.980000, observed total counts = 4974.000000
[Sun Mar 25 11:14:52 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 11:14:52 2012] Spatial fit model total counts = 12226.000000, observed total counts = 8184.000000
[Sun Mar 25 11:14:52 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 11:14:52 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:14:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:14:52 2012] Assessing source extent using major
[Sun Mar 25 11:14:52 2012] Source does appear to be extended
[Sun Mar 25 11:14:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 11:15:46 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:15:46 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Sun Mar 25 11:15:46 2012] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.815
[Sun Mar 25 11:15:46 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.76"
[Sun Mar 25 15:48:44 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src24.ximg exists
[Sun Mar 25 15:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src24.csv
[Sun Mar 25 15:48:44 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Mar 25 15:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src24.csv
[Sun Mar 25 15:48:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 15:48:45 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Mar 25 15:48:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Mar 25 15:48:45 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Mar 25 15:48:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Mar 25 15:48:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:24:04 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 14.924710 pixels away
[Sun Mar 25 20:24:04 2012] Warning, spatial fit 24 centroid is now closest to src. 54
[Sun Mar 25 20:24:04 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.781073 pixels away
[Sun Mar 25 20:24:05 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:05 2012] Assessing source extent using major
[Sun Mar 25 20:24:05 2012] Source does appear to be extended
[Sun Mar 25 20:24:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:24:58 2012] Counts = 1186.056763, rescaling region sizes by 2.000000
[Sun Mar 25 20:24:58 2012] XMMSAS src. selection expression = ellipse(25984.803009, 29111.246033, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Mar 25 20:24:58 2012] Writing source region out to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src25_src.reg
[Sun Mar 25 20:24:58 2012] Extracting stamp from image fullrun_pn_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (224, 260) - (374, 410)
[Sun Mar 25 20:24:58 2012] XMMSAS bgd. selection expression = annulus(25984.803009, 29111.246033, 4350.000000, 8700.000000, X, Y) && !ellipse(26761.130920, 20796.002258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.207180, 27874.976400, 3490.272100, 3490.272100, 0.000000, X, Y) && !ellipse(27442.476400, 26683.084000, 356.552810, 356.552810, 0.000000, X, Y) && !ellipse(26771.735400, 36888.883200, 419.574412, 419.574412, 0.000000, X, Y) && !ellipse(16444.892456, 34077.077423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26605.981628, 29447.009003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33667.767487, 29422.070312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28025.084167, 29141.399200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20009.545600, 29062.224400, 410.842412, 410.842412, 0.000000, X, Y) && !ellipse(23782.166809, 26909.456787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26890.946000, 26176.610000, 308.506409, 308.506409, 0.000000, X, Y) && !ellipse(31062.044000, 23929.756600, 338.176810, 338.176810, 0.000000, X, Y) && !ellipse(31921.546753, 22366.470673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31448.720551, 21959.765320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20533.899094, 20590.116684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25485.997345, 19848.114319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22406.840393, 37514.379242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28338.659058, 35917.575592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31240.489258, 35912.292084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27341.838928, 35237.197784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17913.161000, 34978.337800, 631.008818, 368.275211, 312.094400, X, Y) && !ellipse(33399.649353, 34335.034760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27028.654327, 32714.054413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26578.997380, 32432.714800, 465.942413, 465.942413, 0.000000, X, Y) && !ellipse(20022.987823, 32321.789764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26182.005310, 30150.469635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20057.299700, 29680.214600, 392.764811, 392.764811, 0.000000, X, Y) && !ellipse(24930.666107, 28918.015656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28687.136963, 28230.708221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34036.951965, 27206.108521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29298.110000, 26615.340000, 1217.480035, 1217.480035, 0.000000, X, Y) && !ellipse(28051.347717, 25275.506622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23545.027557, 25264.347534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25982.986969, 24934.988495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24958.557190, 24824.459625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34517.578644, 24166.426544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.054565, 21150.112808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17837.857559, 20530.694473, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 20:24:58 2012] Writing fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src25.gif
[Sun Mar 25 21:27:10 2012] Mean detx,y = (173.91, -746.20) 
[Sun Mar 25 21:27:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 21:32:07 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 21:32:08 2012] Setting source spectrum file to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Mar 25 21:32:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon Mar 26 13:22:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 13:22:31 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:33 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:33 2012] Error reading totcts from fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Mar 26 22:49:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:38 2012] Using photon index=1.80, rate=0.0163, arf fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src25.arf
[Mon Mar 26 22:49:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:38 2012] Updating source flux to 4.4e-14
[Mon Mar 26 23:01:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting