[Sun Mar 25 02:46:03 2012] Detection parameters:
  Position = (304.2, 321.0) = 12 53 5.84 -9 12 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33699.8 +/- 223.9
  Background counts = 497.0
  Rate = 0.3 +/- 0.002

[Sun Mar 25 02:46:13 2012] Off-axis axis estimate = 1.69'
[Sun Mar 25 02:57:19 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 02:57:19 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Mar 25 02:57:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Sun Mar 25 02:57:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun Mar 25 07:04:36 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 25 07:04:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 07:04:36 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 25 07:04:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 07:04:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 07:04:37 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 25 07:04:37 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 25 07:04:37 2012] Fit fullrun_pn_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 25 11:14:52 2012] Spatial fit model total counts = 64600.500000, observed total counts = 64713.000000
[Sun Mar 25 11:14:52 2012] Offset between fit and detection position for source 2 = 0.005472 pixels
[Sun Mar 25 11:14:52 2012] 64522.700000 total counts/ 25600.000000 bgd. counts: snr = 243.266875
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.005472 pixels
  Position = (304.2, 321.0) = 12 53 5.84 -9 12 13.7
  Extent = 14.5 (14.5-29.1)", rotation angle = 0
  Source counts = 38922.7 +/- 254.0
  Background counts = 25600.0
  Rate = 0.4 +/- 0.003
[Sun Mar 25 11:14:52 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:14:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:14:52 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 11:14:52 2012] Source does appear to be extended
[Sun Mar 25 11:14:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 11:15:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:15:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 11:15:46 2012] Initial guess for spatial extent in simple fitting = 14.54"
[Sun Mar 25 11:15:46 2012] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.083
[Sun Mar 25 11:15:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.54"
[Sun Mar 25 15:48:44 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 25 15:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 15:48:44 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 25 15:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 15:48:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 15:48:44 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 25 15:48:45 2012] fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 25 15:48:45 2012] Fit fullrun_pn_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 25 20:24:04 2012] Warning, spatial fit 1 centroid is now closest to src. 25
[Sun Mar 25 20:24:05 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:05 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 20:24:05 2012] Source does appear to be extended
[Sun Mar 25 20:24:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:24:57 2012] Counts = 38922.700000, rescaling region sizes by 3.000000
[Sun Mar 25 20:24:57 2012] XMMSAS src. selection expression = ellipse(26419.207180, 27874.976400, 2617.704075, 2617.704075, 0.000000, X, Y)
[Sun Mar 25 20:24:57 2012] Writing source region out to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src2_src.reg
[Sun Mar 25 20:24:57 2012] Extracting stamp from image fullrun_pn_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (154, 171) - (455, 471)
[Sun Mar 25 20:24:57 2012] XMMSAS bgd. selection expression = annulus(26419.207180, 27874.976400, 13088.520377, 26177.040753, X, Y) && !ellipse(26761.130920, 20796.002258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27442.476400, 26683.084000, 356.552810, 356.552810, 0.000000, X, Y) && !ellipse(33560.410000, 40155.858000, 359.602410, 359.602410, 0.000000, X, Y) && !ellipse(28966.615967, 44064.535645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24155.237603, 43678.842425, 693.134987, 285.746957, 354.328699, X, Y) && !ellipse(27359.139400, 43193.268400, 741.236821, 407.832012, 349.327900, X, Y) && !ellipse(16299.446563, 40988.007800, 371.417611, 371.417611, 0.000000, X, Y) && !ellipse(24331.160492, 12017.198334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34263.986176, 39628.767578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13543.595917, 39314.629822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11425.169281, 37810.492004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11585.648544, 37168.046600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26771.735400, 36888.883200, 419.574412, 419.574412, 0.000000, X, Y) && !ellipse(8802.407883, 36256.946747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18176.902145, 12319.488022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16444.892456, 34077.077423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35196.474000, 32977.736000, 433.272812, 317.784009, 59.638000, X, Y) && !ellipse(24931.675018, 12308.040863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35587.064270, 30711.108276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26605.981628, 29447.009003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33667.767487, 29422.070312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28025.084167, 29141.399200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20009.545600, 29062.224400, 410.842412, 410.842412, 0.000000, X, Y) && !ellipse(25984.803009, 29111.246033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14901.397812, 27390.333038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11875.689000, 26891.464200, 1349.832039, 844.714077, 72.254900, X, Y) && !ellipse(23782.166809, 26909.456787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26890.946000, 26176.610000, 308.506409, 308.506409, 0.000000, X, Y) && !ellipse(31062.044000, 23929.756600, 338.176810, 338.176810, 0.000000, X, Y) && !ellipse(36423.969330, 23778.181610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15293.553200, 22689.315200, 372.888811, 372.888811, 0.000000, X, Y) && !ellipse(31921.546753, 22366.470673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31448.720551, 21959.765320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20533.899094, 20590.116684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25485.997345, 19848.114319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30203.984200, 19276.576000, 446.350413, 446.350413, 0.000000, X, Y) && !ellipse(14225.850830, 14574.989838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23837.234772, 12722.382080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24335.429779, 11398.824753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35834.773193, 40386.818268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19503.628250, 40107.923370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22406.840393, 37514.379242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28338.659058, 35917.575592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31240.489258, 35912.292084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27341.838928, 35237.197784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17913.161000, 34978.337800, 631.008818, 368.275211, 312.094400, X, Y) && !ellipse(33399.649353, 34335.034760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27028.654327, 32714.054413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26578.997380, 32432.714800, 465.942413, 465.942413, 0.000000, X, Y) && !ellipse(20022.987823, 32321.789764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36297.589935, 31782.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26182.005310, 30150.469635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20057.299700, 29680.214600, 392.764811, 392.764811, 0.000000, X, Y) && !ellipse(24930.666107, 28918.015656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28687.136963, 28230.708221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34036.951965, 27206.108521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29298.110000, 26615.340000, 1217.480035, 1217.480035, 0.000000, X, Y) && !ellipse(41424.499298, 26690.438110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.347717, 25275.506622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23545.027557, 25264.347534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25982.986969, 24934.988495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24958.557190, 24824.459625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34517.578644, 24166.426544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.054565, 21150.112808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17837.857559, 20530.694473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25990.468842, 14530.625626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30026.676239, 13898.947693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26580.238464, 45370.687927, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 20:24:57 2012] Writing fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src2.gif
[Sun Mar 25 20:33:20 2012] Mean detx,y = (202.64, 67.16) 
[Sun Mar 25 20:33:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 20:52:15 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 20:52:16 2012] Setting source spectrum file to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 25 20:52:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Mar 26 22:49:30 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:30 2012] Error reading totcts from fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 26 22:49:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:37 2012] Using photon index=1.80, rate=0.404, arf fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src2.arf
[Mon Mar 26 22:49:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:37 2012] Updating source flux to 9e-13
[Mon Mar 26 23:07:42 2012] Reading fit data from xmm0504780501/analysis//spectral/fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src2_pl.csv
[Mon Mar 26 23:07:42 2012] Spectral fit parameter nH value = 1.08206e+22
[Mon Mar 26 23:07:42 2012] Spectral fit parameter PhoIndex value = 8.44142
[Mon Mar 26 23:07:42 2012] Failed to get F(0.3-8.0) from xmm0504780501/analysis//spectral/fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 23:07:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 23:07:42 2012] Using Nh = 1.1e+22, photon index=8.44, rate=0.404, arf fullrun_pn_xmm0504780501_pi300-10000_pass1_cl_src2.arf
[Mon Mar 26 23:07:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 23:07:42 2012] Updating source flux to 5.4e-13