[Sun Mar 25 02:46:22 2012] Detection parameters:
  Position = (347.8, 222.4) = 12 52 53.04 -9 19 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 831.9 +/- 37.3
  Background counts = 144.7
  Rate = 0.01 +/- 0.0005

[Sun Mar 25 02:46:28 2012] Off-axis axis estimate = 6.57'
[Sun Mar 25 09:03:50 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 09:03:50 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Sun Mar 25 09:03:50 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.736
[Sun Mar 25 09:03:50 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.72"
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src5.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src5.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src5.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:15:18 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.026459 pixels away
[Sun Mar 25 11:15:18 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:18 2012] Assessing source extent using major
[Sun Mar 25 11:15:18 2012] Source does appear to be extended
[Sun Mar 25 11:15:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:28:25 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:28:25 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Sun Mar 25 18:28:25 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.736
[Sun Mar 25 18:28:25 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.72"
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Mar 25 20:23:39 2012] Fit fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src5 appears to have run properly
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Mar 25 20:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:24:29 2012] Spatial fit model total counts = 1524.740000, observed total counts = 1395.000000
[Sun Mar 25 20:24:29 2012] Offset between fit and detection position for source 9 = 0.227332 pixels
[Sun Mar 25 20:24:29 2012] 1530.155000 total counts/ 1038.520000 bgd. counts: snr = 15.255813
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.227332 pixels
  Position = (347.9, 222.2) = 12 52 53.01 -9 19 23.5
  Extent = 6.0" x 4.4", rotation angle = 348
  Source counts = 491.6 +/- 39.1
  Background counts = 1038.5
  Rate = 0.004 +/- 0.0003
[Sun Mar 25 20:24:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:29 2012] Assessing source extent using major
[Sun Mar 25 20:24:29 2012] Source does appear to be extended
[Sun Mar 25 20:24:29 2012] Computing asymmetry using major and minor axis, asym = 1.38
[Mon Mar 26 20:34:20 2012] XMMSAS src. selection expression = ellipse(30218.104641, 19279.008881, 360.108099, 261.418396, 348.008250, X, Y)
[Mon Mar 26 20:34:20 2012] Writing source region out to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src9_src.reg
[Mon Mar 26 20:34:20 2012] Extracting stamp from image fullrun_mos2_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (327, 201) - (369, 243)
[Mon Mar 26 20:34:20 2012] XMMSAS bgd. selection expression = annulus(30218.104641, 19279.008881, 600.180165, 1200.360330, X, Y)
[Mon Mar 26 20:34:20 2012] Writing fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src9.gif
[Mon Mar 26 20:57:43 2012] Mean detx,y = (-343.93, -9396.49) 
[Mon Mar 26 20:57:46 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 20:58:14 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 20:58:14 2012] Setting source spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 26 20:58:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Mar 26 22:49:46 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:46 2012] Error reading totcts from fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 26 22:49:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:49 2012] Using photon index=1.80, rate=0.00415, arf fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src9.arf
[Mon Mar 26 22:49:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:49 2012] Updating source flux to 9.1e-14