[Sun Mar 25 02:46:22 2012] Detection parameters:
  Position = (368.2, 259.2) = 12 52 47.02 -9 16 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1145.8 +/- 42.5
  Background counts = 170.9
  Rate = 0.01 +/- 0.0005

[Sun Mar 25 02:46:28 2012] Off-axis axis estimate = 5.81'
[Sun Mar 25 09:03:50 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 09:03:50 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Sun Mar 25 09:03:50 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.786
[Sun Mar 25 09:03:50 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.33"
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src4.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src4.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src4.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:15:18 2012] Spatial fit model total counts = -693.702000, observed total counts = 1875.000000
[Sun Mar 25 11:15:18 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 11:15:18 2012] Spatial fit model total counts = 789.545000, observed total counts = 1740.000000
[Sun Mar 25 11:15:18 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 11:15:18 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:18 2012] Assessing source extent using major
[Sun Mar 25 11:15:18 2012] Source does appear to be extended
[Sun Mar 25 11:15:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:28:25 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:28:25 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Sun Mar 25 18:28:25 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.786
[Sun Mar 25 18:28:25 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.33"
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src4.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src4.csv
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src4.csv
[Sun Mar 25 20:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Mar 25 20:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:24:29 2012] Source 7 is offset by 8.701895 and -2.704496 pixels which is larger than
2 X fitted extent = 8.580828 x 8.580828, not incorporating fit results
[Sun Mar 25 20:24:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:29 2012] Assessing source extent using major
[Sun Mar 25 20:24:29 2012] Source does appear to be extended
[Sun Mar 25 20:24:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 20:34:20 2012] Counts = 1145.813110, rescaling region sizes by 2.000000
[Mon Mar 26 20:34:20 2012] XMMSAS src. selection expression = ellipse(31989.212830, 22501.728485, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Mar 26 20:34:20 2012] Writing source region out to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src7_src.reg
[Mon Mar 26 20:34:20 2012] Extracting stamp from image fullrun_mos2_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (293, 184) - (443, 334)
[Mon Mar 26 20:34:20 2012] XMMSAS bgd. selection expression = annulus(31989.212830, 22501.728485, 4350.000000, 8700.000000, X, Y) && !ellipse(26355.589800, 27846.644200, 4081.248117, 4081.248117, 0.000000, X, Y) && !ellipse(30955.957733, 13279.883804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27237.899841, 28065.958344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30218.104641, 19279.008881, 480.144132, 348.557861, 348.008250, X, Y) && !ellipse(26887.030000, 26106.199600, 304.500809, 304.500809, 0.000000, X, Y) && !ellipse(32849.164421, 20511.951316, 722.371478, 441.510293, 332.557988, X, Y) && !ellipse(35584.958154, 30774.501358, 428.234581, 239.751207, 23.617467, X, Y) && !ellipse(23751.038800, 26905.065400, 323.904809, 323.904809, 0.000000, X, Y) && !ellipse(24568.684723, 27520.517090, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(31484.035095, 21950.152786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36345.314087, 31724.559509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27525.543060, 25373.989624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34525.384430, 24243.470184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33614.621765, 29481.479248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31040.908051, 23870.297852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29280.348000, 27056.650000, 1237.696036, 1237.696036, 0.000000, X, Y) && !ellipse(24828.378448, 28951.638947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24674.817180, 26102.598400, 537.592815, 537.592815, 0.000000, X, Y) && !ellipse(35550.329285, 13634.127106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38693.682190, 16819.117508, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 20:34:20 2012] Writing fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src7.gif
[Mon Mar 26 20:54:57 2012] Mean detx,y = (-3125.51, -7067.76) 
[Mon Mar 26 20:55:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 20:57:29 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 20:57:30 2012] Setting source spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Mar 26 20:57:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Mar 26 21:30:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 21:30:42 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:46 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:46 2012] Error reading totcts from fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Mar 26 22:49:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:49 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src7.arf
[Mon Mar 26 22:49:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:49 2012] Updating source flux to 2e-13
[Mon Mar 26 22:57:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting