[Sun Mar 25 02:46:22 2012] Detection parameters:
  Position = (313.6, 323.2) = 12 53 3.07 -9 12 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1539.9 +/- 56.6
  Background counts = 265.3
  Rate = 0.01 +/- 0.0005

[Sun Mar 25 02:46:28 2012] Off-axis axis estimate = 2.10'
[Sun Mar 25 09:03:50 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 09:03:50 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Sun Mar 25 09:03:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.609
[Sun Mar 25 09:03:50 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.48"
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src3.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src3.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:15:18 2012] Spatial fit model total counts = -693.702000, observed total counts = 12999.000000
[Sun Mar 25 11:15:18 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 11:15:18 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:18 2012] Assessing source extent using major
[Sun Mar 25 11:15:18 2012] Source does appear to be extended
[Sun Mar 25 11:15:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:28:25 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:28:25 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Sun Mar 25 18:28:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.609
[Sun Mar 25 18:28:25 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.48"
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src3.csv
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src3.csv
[Sun Mar 25 20:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Mar 25 20:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:24:29 2012] Source 5 is offset by 9.217584 and -2.878952 pixels which is larger than
2 X fitted extent = 8.580828 x 8.580828, not incorporating fit results
[Sun Mar 25 20:24:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:29 2012] Assessing source extent using major
[Sun Mar 25 20:24:29 2012] Source does appear to be extended
[Sun Mar 25 20:24:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:24:29 2012] Source is confused with source 1
[Mon Mar 26 20:34:20 2012] Counts = 1539.925659, rescaling region sizes by 2.000000
[Mon Mar 26 20:34:20 2012] XMMSAS src. selection expression = ellipse(27237.899841, 28065.958344, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Mar 26 20:34:20 2012] Writing source region out to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src5_src.reg
[Mon Mar 26 20:34:20 2012] Extracting stamp from image fullrun_mos2_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (239, 248) - (389, 398)
[Mon Mar 26 20:34:20 2012] XMMSAS bgd. selection expression = annulus(27237.899841, 28065.958344, 4350.000000, 8700.000000, X, Y) && !ellipse(26355.589800, 27846.644200, 4081.248117, 4081.248117, 0.000000, X, Y) && !ellipse(31989.212830, 22501.728485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30218.104641, 19279.008881, 480.144132, 348.557861, 348.008250, X, Y) && !ellipse(26887.030000, 26106.199600, 304.500809, 304.500809, 0.000000, X, Y) && !ellipse(32849.164421, 20511.951316, 722.371478, 441.510293, 332.557988, X, Y) && !ellipse(35227.929077, 32983.091187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20523.030800, 20595.435600, 362.410410, 362.410410, 0.000000, X, Y) && !ellipse(35584.958154, 30774.501358, 428.234581, 239.751207, 23.617467, X, Y) && !ellipse(26751.511780, 36909.979200, 440.444813, 440.444813, 0.000000, X, Y) && !ellipse(23751.038800, 26905.065400, 323.904809, 323.904809, 0.000000, X, Y) && !ellipse(24568.684723, 27520.517090, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(20047.315857, 29671.202332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.035095, 21950.152786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26592.772858, 32417.495605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.124510, 32728.448200, 387.108811, 387.108811, 0.000000, X, Y) && !ellipse(36345.314087, 31724.559509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27525.543060, 25373.989624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34525.384430, 24243.470184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33614.621765, 29481.479248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21273.683182, 32389.835510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31040.908051, 23870.297852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36012.984070, 32944.752563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29280.348000, 27056.650000, 1237.696036, 1237.696036, 0.000000, X, Y) && !ellipse(22954.390600, 27650.931600, 331.320010, 331.320010, 0.000000, X, Y) && !ellipse(24828.378448, 28951.638947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24674.817180, 26102.598400, 537.592815, 537.592815, 0.000000, X, Y)
[Mon Mar 26 20:34:20 2012] Writing fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src5.gif
[Mon Mar 26 20:50:50 2012] Mean detx,y = (-356.67, -96.13) 
[Mon Mar 26 20:50:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 20:54:32 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 20:54:32 2012] Setting source spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Mar 26 20:54:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Mar 26 21:27:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 21:27:29 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:45 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:46 2012] Error reading totcts from fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Mar 26 22:49:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:49 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src5.arf
[Mon Mar 26 22:49:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:49 2012] Updating source flux to 1.3e-13
[Mon Mar 26 22:57:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting