[Sun Mar 25 02:46:26 2012] Detection parameters:
  Position = (176.2, 261.0) = 12 53 43.44 -9 16 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.2 +/- 23.4
  Background counts = 110.9
  Rate = 0.002 +/- 0.0002

[Sun Mar 25 02:46:28 2012] Off-axis axis estimate = 9.27'
[Sun Mar 25 09:03:50 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 09:03:50 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Sun Mar 25 09:03:50 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Sun Mar 25 09:03:50 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 11.06"
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src28.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src28.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src28.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:30 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Mar 25 11:14:30 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Mar 25 11:14:30 2012] Fit fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Mar 25 11:15:18 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 11.147578 pixels away
[Sun Mar 25 11:15:18 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:18 2012] Assessing source extent using major
[Sun Mar 25 11:15:18 2012] Source does appear to be extended
[Sun Mar 25 11:15:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:28:25 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:28:25 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Sun Mar 25 18:28:25 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Sun Mar 25 18:28:25 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 11.06"
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src25.ximg exists
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Mar 25 20:23:39 2012] Fit fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src25 appears to have run properly
[Sun Mar 25 20:23:40 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Mar 25 20:23:40 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Mar 25 20:23:40 2012] Fit fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Mar 25 20:24:29 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 11.497744 pixels away
[Sun Mar 25 20:24:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:29 2012] Assessing source extent using major
[Sun Mar 25 20:24:29 2012] Source does appear to be extended
[Sun Mar 25 20:24:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 20:34:21 2012] XMMSAS src. selection expression = ellipse(15284.823868, 22657.708801, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 20:34:21 2012] Writing source region out to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src39_src.reg
[Mon Mar 26 20:34:21 2012] Extracting stamp from image fullrun_mos2_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (139, 223) - (214, 298)
[Mon Mar 26 20:34:21 2012] XMMSAS bgd. selection expression = annulus(15284.823868, 22657.708801, 1087.500000, 2175.000000, X, Y)
[Mon Mar 26 20:34:21 2012] Writing fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src39.gif
[Mon Mar 26 21:10:54 2012] Mean detx,y = (12275.74, -693.40) 
[Mon Mar 26 21:10:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 21:11:14 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 21:11:14 2012] Setting source spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon Mar 26 21:11:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon Mar 26 22:30:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 22:30:49 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:48 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:48 2012] Error reading totcts from fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon Mar 26 22:49:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:50 2012] Using photon index=1.80, rate=0.00168, arf fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src39.arf
[Mon Mar 26 22:49:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:50 2012] Updating source flux to 4e-14
[Mon Mar 26 22:57:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting