[Sun Mar 25 02:46:26 2012] Detection parameters:
  Position = (397.4, 279.2) = 12 52 38.46 -9 15 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.7 +/- 17.4
  Background counts = 155.6
  Rate = 0.002 +/- 0.0003

[Sun Mar 25 02:46:28 2012] Off-axis axis estimate = 7.31'
[Sun Mar 25 09:03:50 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 09:03:50 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Sun Mar 25 09:03:50 2012] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.598
[Sun Mar 25 09:03:50 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.08"
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src25.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src25.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src25.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:30 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Mar 25 11:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Mar 25 11:14:30 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Mar 25 11:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Mar 25 11:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:15:18 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 11.904046 pixels away
[Sun Mar 25 11:15:18 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:18 2012] Assessing source extent using major
[Sun Mar 25 11:15:18 2012] Source does appear to be extended
[Sun Mar 25 11:15:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:28:25 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:28:25 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Sun Mar 25 18:28:25 2012] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.598
[Sun Mar 25 18:28:25 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 10.08"
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src22.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src22.csv
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src22.csv
[Sun Mar 25 20:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:23:40 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Mar 25 20:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Mar 25 20:23:40 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Mar 25 20:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Mar 25 20:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:24:29 2012] Spatial fit model total counts = 994.282000, observed total counts = 775.000000
[Sun Mar 25 20:24:29 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 20:24:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:29 2012] Assessing source extent using major
[Sun Mar 25 20:24:29 2012] Source does appear to be extended
[Sun Mar 25 20:24:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 20:34:21 2012] XMMSAS src. selection expression = ellipse(34525.384430, 24243.470184, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 20:34:21 2012] Writing source region out to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src37_src.reg
[Mon Mar 26 20:34:21 2012] Extracting stamp from image fullrun_mos2_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (360, 242) - (435, 317)
[Mon Mar 26 20:34:21 2012] XMMSAS bgd. selection expression = annulus(34525.384430, 24243.470184, 1087.500000, 2175.000000, X, Y) && !ellipse(31989.212830, 22501.728485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.035095, 21950.152786, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 20:34:21 2012] Writing fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src37.gif
[Mon Mar 26 21:08:58 2012] Mean detx,y = (-6110.87, -6320.75) 
[Mon Mar 26 21:09:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 21:09:54 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 21:09:54 2012] Setting source spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Mon Mar 26 21:09:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Mon Mar 26 22:30:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 22:30:17 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:47 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:47 2012] Error reading totcts from fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Mon Mar 26 22:49:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:50 2012] Using photon index=1.80, rate=0.00191, arf fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src37.arf
[Mon Mar 26 22:49:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:50 2012] Updating source flux to 4.2e-14
[Mon Mar 26 22:57:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting