[Sun Mar 25 02:46:25 2012] Detection parameters:
  Position = (285.9, 333.3) = 12 53 11.21 -9 11 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.9 +/- 25.5
  Background counts = 245.5
  Rate = 0.001 +/- 0.0002

[Sun Mar 25 02:46:28 2012] Off-axis axis estimate = 2.69'
[Sun Mar 25 09:03:50 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 09:03:50 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sun Mar 25 09:03:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.956
[Sun Mar 25 09:03:50 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 7.77"
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src36.ximg exists
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun Mar 25 11:14:29 2012] Fit fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src36 appears to have run properly
[Sun Mar 25 11:14:30 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun Mar 25 11:14:30 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Mar 25 11:14:30 2012] Fit fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Sun Mar 25 11:15:18 2012] Source 29 is offset by -7.205788 and 6.481850 pixels which is larger than
2 X fitted extent = 5.184632 x 5.184632, not incorporating fit results
[Sun Mar 25 11:15:18 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:18 2012] Assessing source extent using major
[Sun Mar 25 11:15:18 2012] Source does appear to be extended
[Sun Mar 25 11:15:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:28:25 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:28:25 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sun Mar 25 18:28:25 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.956
[Sun Mar 25 18:28:25 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 7.77"
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src32.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src32.csv
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src32.csv
[Sun Mar 25 20:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:23:40 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun Mar 25 20:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun Mar 25 20:23:40 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun Mar 25 20:23:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun Mar 25 20:23:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:24:29 2012] Spatial fit model total counts = 580.498000, observed total counts = 2313.000000
[Sun Mar 25 20:24:29 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 20:24:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:29 2012] Assessing source extent using major
[Sun Mar 25 20:24:29 2012] Source does appear to be extended
[Sun Mar 25 20:24:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 20:34:21 2012] XMMSAS src. selection expression = ellipse(24828.378448, 28951.638947, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 20:34:21 2012] Writing source region out to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src29_src.reg
[Mon Mar 26 20:34:21 2012] Extracting stamp from image fullrun_mos2_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (248, 296) - (323, 371)
[Mon Mar 26 20:34:21 2012] XMMSAS bgd. selection expression = annulus(24828.378448, 28951.638947, 1087.500000, 2175.000000, X, Y) && !ellipse(26355.589800, 27846.644200, 4081.248117, 4081.248117, 0.000000, X, Y) && !ellipse(27237.899841, 28065.958344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23751.038800, 26905.065400, 323.904809, 323.904809, 0.000000, X, Y) && !ellipse(24568.684723, 27520.517090, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22954.390600, 27650.931600, 331.320010, 331.320010, 0.000000, X, Y)
[Mon Mar 26 20:34:21 2012] Writing fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src29.gif
[Mon Mar 26 21:15:57 2012] Mean detx,y = (1036.23, 1547.13) 
[Mon Mar 26 21:16:00 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 21:16:20 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 21:16:20 2012] Setting source spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Mar 26 21:16:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Mar 26 22:44:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 22:44:15 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:48 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:48 2012] Error reading totcts from fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Mar 26 22:49:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:51 2012] Using photon index=1.80, rate=0.00128, arf fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src29.arf
[Mon Mar 26 22:49:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:51 2012] Updating source flux to 1.3e-14
[Mon Mar 26 22:57:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting