[Sun Mar 25 02:46:24 2012] Detection parameters:
  Position = (418.3, 365.2) = 12 52 32.32 -9 8 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.9 +/- 21.2
  Background counts = 127.4
  Rate = 0.002 +/- 0.0003

[Sun Mar 25 02:46:28 2012] Off-axis axis estimate = 9.95'
[Sun Mar 25 09:03:50 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 09:03:50 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Sun Mar 25 09:03:50 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.924
[Sun Mar 25 09:03:50 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.40"
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src23.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src23.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src23.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:30 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Mar 25 11:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Mar 25 11:14:30 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Mar 25 11:14:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Mar 25 11:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:15:18 2012] Source 23 is offset by 4.510576 and -5.983293 pixels which is larger than
2 X fitted extent = 1.101140 x 1.101140, not incorporating fit results
[Sun Mar 25 11:15:18 2012] Warning, spatial fit 23 centroid is now closest to src. 18
[Sun Mar 25 11:15:18 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:18 2012] Assessing source extent using major
[Sun Mar 25 11:15:18 2012] Source does appear to be extended
[Sun Mar 25 11:15:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:28:25 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:28:25 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Sun Mar 25 18:28:25 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.924
[Sun Mar 25 18:28:25 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.40"
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src20.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src20.csv
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src20.csv
[Sun Mar 25 20:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:23:40 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Mar 25 20:23:40 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Mar 25 20:23:40 2012] Fit fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Mar 25 20:24:29 2012] Source 23 is offset by -9.540804 and -0.429760 pixels which is larger than
2 X fitted extent = 1.312110 x 1.312110, not incorporating fit results
[Sun Mar 25 20:24:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:29 2012] Assessing source extent using major
[Sun Mar 25 20:24:29 2012] Source does appear to be extended
[Sun Mar 25 20:24:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 20:34:21 2012] XMMSAS src. selection expression = ellipse(36345.314087, 31724.559509, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 20:34:21 2012] Writing source region out to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src23_src.reg
[Mon Mar 26 20:34:21 2012] Extracting stamp from image fullrun_mos2_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (381, 328) - (456, 403)
[Mon Mar 26 20:34:21 2012] XMMSAS bgd. selection expression = annulus(36345.314087, 31724.559509, 1087.500000, 2175.000000, X, Y) && !ellipse(35227.929077, 32983.091187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35584.958154, 30774.501358, 428.234581, 239.751207, 23.617467, X, Y) && !ellipse(33614.621765, 29481.479248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36012.984070, 32944.752563, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 20:34:21 2012] Writing fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src23.gif
[Mon Mar 26 21:07:47 2012] Mean detx,y = (-10632.01, -144.65) 
[Mon Mar 26 21:07:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 21:08:06 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 21:08:06 2012] Setting source spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Mar 26 21:08:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Mar 26 22:29:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 22:29:29 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:47 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:47 2012] Error reading totcts from fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Mar 26 22:49:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:50 2012] Using photon index=1.80, rate=0.00197, arf fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src23.arf
[Mon Mar 26 22:49:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:50 2012] Updating source flux to 3.4e-14
[Mon Mar 26 22:57:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting