[Sun Mar 25 02:46:21 2012] Detection parameters:
  Position = (304.2, 320.0) = 12 53 5.85 -9 12 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10588.1 +/- 123.9
  Background counts = 267.8
  Rate = 0.09 +/- 0.001

[Sun Mar 25 02:46:28 2012] Off-axis axis estimate = 1.61'
[Sun Mar 25 09:03:50 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 09:03:50 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Mar 25 09:03:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Sun Mar 25 09:03:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 25 11:14:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 25 11:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 25 11:14:29 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 25 11:14:29 2012] Fit fullrun_mos2_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 25 11:15:18 2012] Spatial fit model total counts = 24023.100000, observed total counts = 23285.000000
[Sun Mar 25 11:15:18 2012] Offset between fit and detection position for source 1 = 0.848609 pixels
[Sun Mar 25 11:15:18 2012] 23775.400000 total counts/ 11413.700000 bgd. counts: snr = 115.708423
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.848609 pixels
  Position = (303.7, 320.7) = 12 53 5.99 -9 12 15.0
  Extent = 13.2 (12.8-13.8)", rotation angle = 0
  Source counts = 12361.7 +/- 154.2
  Background counts = 11413.7
  Rate = 0.1 +/- 0.001
[Sun Mar 25 11:15:18 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:18 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 11:15:18 2012] Source does appear to be extended
[Sun Mar 25 11:15:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 18:28:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 18:28:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 18:28:25 2012] Initial guess for spatial extent in simple fitting = 13.24"
[Sun Mar 25 18:28:25 2012] source mask rpix=3.0, npix_max = 50, mask sum = 44, frac = 0.876
[Sun Mar 25 18:28:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.24"
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 25 20:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src1.csv
[Sun Mar 25 20:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 25 20:23:39 2012] fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 25 20:23:39 2012] Fit fullrun_mos2_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 25 20:24:29 2012] Spatial fit model total counts = 36020.500000, observed total counts = 33984.000000
[Sun Mar 25 20:24:29 2012] Offset between fit and detection position for source 1 = 0.216514 pixels
[Sun Mar 25 20:24:29 2012] 35977.600000 total counts/ 18059.600000 bgd. counts: snr = 133.332330
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.216514 pixels
  Position = (303.5, 320.6) = 12 53 6.05 -9 12 15.1
  Extent = 17.0 (16.6-17.3)", rotation angle = 0
  Source counts = 17918.0 +/- 189.7
  Background counts = 18059.6
  Rate = 0.2 +/- 0.002
[Sun Mar 25 20:24:29 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:29 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 20:24:29 2012] Source does appear to be extended
[Sun Mar 25 20:24:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:24:29 2012] Source is confused with source 5
[Mon Mar 26 20:34:20 2012] Counts = 17918.000000, rescaling region sizes by 3.000000
[Mon Mar 26 20:34:20 2012] XMMSAS src. selection expression = ellipse(26355.589800, 27846.644200, 3060.936088, 3060.936088, 0.000000, X, Y)
[Mon Mar 26 20:34:20 2012] Writing source region out to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 26 20:34:20 2012] Extracting stamp from image fullrun_mos2_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (128, 145) - (479, 497)
[Mon Mar 26 20:34:20 2012] XMMSAS bgd. selection expression = annulus(26355.589800, 27846.644200, 15304.680440, 30609.360881, X, Y) && !ellipse(30955.957733, 13279.883804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27237.899841, 28065.958344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31989.212830, 22501.728485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30218.104641, 19279.008881, 480.144132, 348.557861, 348.008250, X, Y) && !ellipse(26887.030000, 26106.199600, 304.500809, 304.500809, 0.000000, X, Y) && !ellipse(33552.249460, 40161.379600, 466.703213, 466.703213, 0.000000, X, Y) && !ellipse(32849.164421, 20511.951316, 722.371478, 441.510293, 332.557988, X, Y) && !ellipse(35227.929077, 32983.091187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20523.030800, 20595.435600, 362.410410, 362.410410, 0.000000, X, Y) && !ellipse(35584.958154, 30774.501358, 428.234581, 239.751207, 23.617467, X, Y) && !ellipse(23843.604040, 12737.180600, 587.975217, 263.926408, 7.442150, X, Y) && !ellipse(26751.511780, 36909.979200, 440.444813, 440.444813, 0.000000, X, Y) && !ellipse(14951.431839, 27207.053711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23751.038800, 26905.065400, 323.904809, 323.904809, 0.000000, X, Y) && !ellipse(24568.684723, 27520.517090, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(20047.315857, 29671.202332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.035095, 21950.152786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26592.772858, 32417.495605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.124510, 32728.448200, 387.108811, 387.108811, 0.000000, X, Y) && !ellipse(36345.314087, 31724.559509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27525.543060, 25373.989624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34525.384430, 24243.470184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33614.621765, 29481.479248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15284.823868, 22657.708801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21273.683182, 32389.835510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31040.908051, 23870.297852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36012.984070, 32944.752563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29054.441681, 44050.803833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29280.348000, 27056.650000, 1237.696036, 1237.696036, 0.000000, X, Y) && !ellipse(22954.390600, 27650.931600, 331.320010, 331.320010, 0.000000, X, Y) && !ellipse(24828.378448, 28951.638947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11861.192795, 26797.069397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24674.817180, 26102.598400, 537.592815, 537.592815, 0.000000, X, Y) && !ellipse(27306.240295, 43209.690552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34312.137787, 39639.655853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35550.329285, 13634.127106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19465.126343, 40082.833344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38693.682190, 16819.117508, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 20:34:20 2012] Writing fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src1.gif
[Mon Mar 26 20:34:51 2012] Mean detx,y = (28.45, -160.48) 
[Mon Mar 26 20:34:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 20:48:02 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 20:48:02 2012] Setting source spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 20:48:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 26 22:49:45 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:45 2012] Error reading totcts from fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 26 22:49:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:49 2012] Using photon index=1.80, rate=0.151, arf fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 22:49:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:49 2012] Updating source flux to 1.3e-12
[Mon Mar 26 22:57:12 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Mar 26 23:01:20 2012] Reading fit data from xmm0504780501/analysis//spectral/fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 26 23:01:20 2012] Spectral fit parameter nH value = 8.21689e+21
[Mon Mar 26 23:01:20 2012] Spectral fit parameter PhoIndex value = 6.75684
[Mon Mar 26 23:01:20 2012] Failed to get F(0.3-8.0) from xmm0504780501/analysis//spectral/fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 23:01:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 23:01:20 2012] Using Nh = 8.2e+21, photon index=6.76, rate=0.151, arf fullrun_mos2_xmm0504780501_pi300-10000_pass1_cl_src1.arf
[Mon Mar 26 23:01:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 23:01:20 2012] Updating source flux to 7.8e-13