[Sun Mar 25 02:46:16 2012] Detection parameters:
  Position = (408.9, 385.6) = 12 52 35.10 -9 7 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.2 +/- 21.7
  Background counts = 132.8
  Rate = 0.002 +/- 0.0003

[Sun Mar 25 02:46:20 2012] Off-axis axis estimate = 10.20'
[Sun Mar 25 07:04:38 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 07:04:38 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Sun Mar 25 07:04:38 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.058
[Sun Mar 25 07:04:38 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.53"
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src21.ximg exists
[Sun Mar 25 09:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src21.csv
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Mar 25 09:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src21.csv
[Sun Mar 25 09:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Mar 25 09:03:49 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Mar 25 11:15:05 2012] Warning, spatial fit 21 centroid is now closest to src. 12
[Sun Mar 25 11:15:05 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.618381 pixels away
[Sun Mar 25 11:15:05 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:05 2012] Assessing source extent using major
[Sun Mar 25 11:15:05 2012] Source does appear to be extended
[Sun Mar 25 11:15:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 11:15:05 2012] Source is confused with source 12
[Sun Mar 25 15:48:46 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 15:48:46 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Sun Mar 25 15:48:46 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.058
[Sun Mar 25 15:48:46 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.53"
[Sun Mar 25 18:28:24 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src20.ximg exists
[Sun Mar 25 18:28:24 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Mar 25 18:28:24 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Mar 25 18:28:25 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Mar 25 18:28:25 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Mar 25 18:28:25 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Mar 25 20:24:16 2012] Warning, spatial fit 20 centroid is now closest to src. 12
[Sun Mar 25 20:24:16 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:16 2012] Assessing source extent using major
[Sun Mar 25 20:24:16 2012] Source does appear to be extended
[Sun Mar 25 20:24:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 15:46:15 2012] XMMSAS src. selection expression = ellipse(35525.010925, 33496.496857, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 15:46:15 2012] Writing source region out to fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src9_src.reg
[Mon Mar 26 15:46:15 2012] Extracting stamp from image fullrun_mos1_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (371, 348) - (446, 423)
[Mon Mar 26 15:46:15 2012] XMMSAS bgd. selection expression = annulus(35525.010925, 33496.496857, 1087.500000, 2175.000000, X, Y) && !ellipse(35210.730000, 32958.832000, 336.480010, 336.480010, 0.000000, X, Y) && !ellipse(35596.009064, 30730.253693, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 15:46:15 2012] Writing fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src9.gif
[Mon Mar 26 16:07:49 2012] Mean detx,y = (1913.28, 10299.20) 
[Mon Mar 26 16:07:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 16:08:27 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 16:08:27 2012] Setting source spectrum file to fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 26 16:08:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Mar 26 19:58:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 19:58:22 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:42 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:42 2012] Error reading totcts from fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Mar 26 22:49:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:45 2012] Using photon index=1.80, rate=0.00189, arf fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src9.arf
[Mon Mar 26 22:49:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:45 2012] Updating source flux to 3.1e-14
[Mon Mar 26 22:49:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting