[Sun Mar 25 02:46:16 2012] Detection parameters:
  Position = (278.1, 502.6) = 12 53 13.52 -8 59 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.5 +/- 22.1
  Background counts = 96.5
  Rate = 0.001 +/- 0.0002

[Sun Mar 25 02:46:20 2012] Off-axis axis estimate = 14.87'
[Sun Mar 25 07:04:38 2012] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 07:04:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 07:04:38 2012] Initial guess for spatial extent in simple fitting = 13.86"
[Sun Mar 25 07:04:38 2012] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.975
[Sun Mar 25 07:04:38 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 13.86"
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src28.ximg exists
[Sun Mar 25 09:03:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src28.csv
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Mar 25 09:03:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src28.csv
[Sun Mar 25 09:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 09:03:50 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Mar 25 09:03:50 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Mar 25 09:03:50 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Mar 25 11:15:05 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.497228 pixels away
[Sun Mar 25 11:15:05 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:05 2012] Assessing source extent using major
[Sun Mar 25 11:15:05 2012] Source does appear to be extended
[Sun Mar 25 11:15:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 15:48:46 2012] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 15:48:46 2012] Initial guess for spatial extent in simple fitting = 13.86"
[Sun Mar 25 15:48:46 2012] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.975
[Sun Mar 25 15:48:46 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 13.86"
[Sun Mar 25 18:28:24 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src27.ximg exists
[Sun Mar 25 18:28:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src27.csv
[Sun Mar 25 18:28:24 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Mar 25 18:28:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src27.csv
[Sun Mar 25 18:28:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 18:28:25 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Mar 25 18:28:25 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Mar 25 18:28:25 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Mar 25 20:24:16 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.171053 pixels away
[Sun Mar 25 20:24:16 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:16 2012] Assessing source extent using major
[Sun Mar 25 20:24:16 2012] Source does appear to be extended
[Sun Mar 25 20:24:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 15:46:15 2012] XMMSAS src. selection expression = ellipse(24143.383545, 43673.999420, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 15:46:15 2012] Writing source region out to fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src5_src.reg
[Mon Mar 26 15:46:15 2012] Extracting stamp from image fullrun_mos1_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (241, 465) - (316, 540)
[Mon Mar 26 15:46:15 2012] XMMSAS bgd. selection expression = annulus(24143.383545, 43673.999420, 1087.500000, 2175.000000, X, Y)
[Mon Mar 26 15:46:15 2012] Writing fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src5.gif
[Mon Mar 26 16:13:05 2012] Mean detx,y = (15701.69, 3710.09) 
[Mon Mar 26 16:13:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 16:13:43 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 16:13:44 2012] Setting source spectrum file to fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Mar 26 16:13:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Mar 26 20:14:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 20:14:59 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:43 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:43 2012] Error reading totcts from fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Mar 26 22:49:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:45 2012] Using photon index=1.80, rate=0.00141, arf fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src5.arf
[Mon Mar 26 22:49:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:45 2012] Updating source flux to 3.9e-14
[Mon Mar 26 22:49:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting