[Sun Mar 25 02:46:18 2012] Detection parameters:
  Position = (282.5, 314.0) = 12 53 12.23 -9 12 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.9 +/- 26.0
  Background counts = 217.6
  Rate = 0.001 +/- 0.0002

[Sun Mar 25 02:46:20 2012] Off-axis axis estimate = 1.61'
[Sun Mar 25 07:04:38 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 07:04:38 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Mar 25 07:04:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.068
[Sun Mar 25 07:04:38 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.24"
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src29.ximg exists
[Sun Mar 25 09:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src29.csv
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Mar 25 09:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src29.csv
[Sun Mar 25 09:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 09:03:50 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Mar 25 09:03:50 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Mar 25 09:03:50 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Mar 25 11:15:05 2012] Source 26 is offset by -6.182463 and -3.140139 pixels which is larger than
2 X fitted extent = 5.399724 x 5.399724, not incorporating fit results
[Sun Mar 25 11:15:05 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 11:15:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 11:15:05 2012] Assessing source extent using major
[Sun Mar 25 11:15:05 2012] Source does appear to be extended
[Sun Mar 25 11:15:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 15:48:46 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 15:48:46 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Mar 25 15:48:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.068
[Sun Mar 25 15:48:46 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.24"
[Sun Mar 25 18:28:24 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src28.ximg exists
[Sun Mar 25 18:28:24 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Mar 25 18:28:24 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_src28 appears to have run properly
[Sun Mar 25 18:28:25 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Mar 25 18:28:25 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Mar 25 18:28:25 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Mar 25 20:24:16 2012] Source 26 is offset by -6.182463 and -3.183196 pixels which is larger than
2 X fitted extent = 5.906943 x 5.906943, not incorporating fit results
[Sun Mar 25 20:24:16 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 20:24:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 20:24:16 2012] Assessing source extent using major
[Sun Mar 25 20:24:16 2012] Source does appear to be extended
[Sun Mar 25 20:24:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 15:46:15 2012] XMMSAS src. selection expression = ellipse(24526.485687, 27265.867920, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 26 15:46:15 2012] Writing source region out to fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src26_src.reg
[Mon Mar 26 15:46:15 2012] Extracting stamp from image fullrun_mos1_xmm0504780501_pi300-10000_cl_sm2.00.img.gz, (245, 276) - (320, 351)
[Mon Mar 26 15:46:15 2012] XMMSAS bgd. selection expression = annulus(24526.485687, 27265.867920, 1087.500000, 2175.000000, X, Y) && !ellipse(26409.942000, 27871.388000, 4744.104137, 4744.104137, 0.000000, X, Y) && !ellipse(26858.607000, 26109.401800, 322.651209, 322.651209, 0.000000, X, Y) && !ellipse(23759.268400, 26905.322200, 396.876011, 396.876011, 0.000000, X, Y) && !ellipse(26621.362000, 29144.362000, 789.622423, 789.622423, 0.000000, X, Y) && !ellipse(24822.970154, 28690.994720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22970.491400, 27672.106800, 314.743209, 314.743209, 0.000000, X, Y) && !ellipse(27157.510000, 29994.664000, 1431.696041, 1431.696041, 0.000000, X, Y) && !ellipse(24634.303772, 26170.891357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27718.064000, 28193.228000, 1684.504048, 1033.560030, 0.004000, X, Y)
[Mon Mar 26 15:46:15 2012] Writing fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src26.gif
[Mon Mar 26 16:13:55 2012] Mean detx,y = (356.03, -2085.94) 
[Mon Mar 26 16:13:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 16:14:20 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 16:14:21 2012] Setting source spectrum file to fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Mar 26 16:14:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Mar 26 20:15:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 26 20:15:07 2012] rmf not generated due to insufficient counts
[Mon Mar 26 22:49:43 2012] Updating aperture counts using extracted products
[Mon Mar 26 22:49:43 2012] Error reading totcts from fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Mar 26 22:49:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 22:49:45 2012] Using photon index=1.80, rate=0.00137, arf fullrun_mos1_xmm0504780501_pi300-10000_pass1_cl_src26.arf
[Mon Mar 26 22:49:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 22:49:45 2012] Updating source flux to 1.4e-14
[Mon Mar 26 22:49:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting