[Sun Mar 25 02:46:17 2012] Detection parameters:
  Position = (230.9, 341.9) = 12 53 27.36 -9 10 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.2 +/- 23.1
  Background counts = 159.0
  Rate = 0.002 +/- 0.0003

[Sun Mar 25 02:46:20 2012] Off-axis axis estimate = 5.82'
[Sun Mar 25 07:04:38 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 07:04:38 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Sun Mar 25 07:04:38 2012] source mask rpix=2.1, npix_max = 28, mask sum = 36, frac = 1.285
[Sun Mar 25 07:04:38 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.34"
[Sun Mar 25 09:03:48 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src18.ximg exists
[Sun Mar 25 09:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src18.csv
[Sun Mar 25 09:03:48 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Mar 25 09:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src18.csv
[Sun Mar 25 09:03:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Mar 25 09:03:49 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Mar 25 11:15:05 2012] Spatial fit model total counts = 1269.390000, observed total counts = 1216.000000
[Sun Mar 25 11:15:05 2012] Offset between fit and detection position for source 16 = 8.417551 pixels
[Sun Mar 25 11:15:05 2012] Warning, changing simple spatial fit ID from 18 to 6
[Sun Mar 25 11:15:05 2012] 1287.530023 total counts/ 1287.530000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 8.417551 pixels
  Position = (222.6, 342.4) = 12 53 29.83 -9 10 40.2
  Extent = 18.4 (18.4-36.8)", rotation angle = 0
  Source counts = 0.0 +/- 35.9
  Background counts = 1287.5
  Rate = 2e-10 +/- 0.0003
  Deleting source due to low Poisson probability