[Sun Mar 25 02:46:17 2012] Detection parameters: Position = (414.4, 379.3) = 12 52 33.47 -9 8 0.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 100.8 +/- 19.6 Background counts = 132.8 Rate = 0.001 +/- 0.0003 [Sun Mar 25 02:46:20 2012] Off-axis axis estimate = 10.25' [Sun Mar 25 07:04:38 2012] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting [Sun Mar 25 07:04:38 2012] Initial guess for spatial extent in simple fitting = 11.55" [Sun Mar 25 07:04:38 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.054 [Sun Mar 25 07:04:38 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 11.55" [Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src31.ximg exists [Sun Mar 25 09:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src31.csv [Sun Mar 25 09:03:49 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src31_1.ximg exists [Sun Mar 25 09:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src31.csv [Sun Mar 25 09:03:49 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Mar 25 09:03:50 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Sun Mar 25 09:03:50 2012] fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Sun Mar 25 09:03:50 2012] Fit fullrun_mos1_xmm0504780501_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly [Sun Mar 25 11:15:05 2012] Spatial fit model total counts = 1302.280000, observed total counts = 1301.000000 [Sun Mar 25 11:15:05 2012] Offset between fit and detection position for source 10 = 7.905354 pixels [Sun Mar 25 11:15:05 2012] Warning, changing simple spatial fit ID from 31 to 7 [Sun Mar 25 11:15:05 2012] 1328.790000 total counts/ 1328.790000 bgd. counts: snr = 0.000000 Spatial fit parameters: Offset between fit and detection position for source 10 = 7.905354 pixels Position = (413.6, 371.4) = 12 52 33.72 -9 8 34.1 Extent = 18.6" x 2.3", rotation angle = 90 Source counts = 0.0 +/- 36.5 Background counts = 1328.8 Rate = 6e-13 +/- 0.0003 Deleting source due to low Poisson probability