[Mon Sep  3 10:40:21 2012] Detection parameters:
  Position = (314.9, 322.2) = 14 7 26.65 -27 0 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1824.0 +/- 55.0
  Background counts = 113.4
  Rate = 0.07 +/- 0.002

[Mon Sep  3 10:40:22 2012] Off-axis axis estimate = 2.10'
[Mon Sep  3 15:01:49 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 15:01:49 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Mon Sep  3 15:01:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.660
[Mon Sep  3 15:01:49 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.48"
[Mon Sep  3 16:09:12 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src2.ximg exists
[Mon Sep  3 16:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src2.csv
[Mon Sep  3 16:09:12 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Sep  3 16:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src2.csv
[Mon Sep  3 16:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 16:09:12 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Sep  3 16:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Sep  3 16:09:12 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Sep  3 16:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Sep  3 16:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 16:09:35 2012] Spatial fit model total counts = 10600.900000, observed total counts = 8952.000000
[Mon Sep  3 16:09:35 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 16:09:35 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 16:09:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 16:09:35 2012] Assessing source extent using major
[Mon Sep  3 16:09:35 2012] Source does appear to be extended
[Mon Sep  3 16:09:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 18:06:59 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:06:59 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Mon Sep  3 18:06:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.660
[Mon Sep  3 18:06:59 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.48"
[Mon Sep  3 19:09:54 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src2.ximg exists
[Mon Sep  3 19:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src2.csv
[Mon Sep  3 19:09:54 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Sep  3 19:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src2.csv
[Mon Sep  3 19:09:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 19:09:54 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Sep  3 19:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Sep  3 19:09:54 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Sep  3 19:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Sep  3 19:09:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 19:10:10 2012] Spatial fit model total counts = 10600.900000, observed total counts = 8952.000000
[Mon Sep  3 19:10:10 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 19:10:11 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 19:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 19:10:11 2012] Assessing source extent using major
[Mon Sep  3 19:10:11 2012] Source does appear to be extended
[Mon Sep  3 19:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 19:43:41 2012] Counts = 1824.016846, rescaling region sizes by 2.000000
[Mon Sep  3 19:43:41 2012] XMMSAS src. selection expression = ellipse(27348.752625, 27985.102081, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Sep  3 19:43:41 2012] Writing source region out to fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src2_src.reg
[Mon Sep  3 19:43:41 2012] Extracting stamp from image fullrun_mos2_xmm0504780401_pi300-10000_cl_sm2.00.img.gz, (240, 247) - (390, 397)
[Mon Sep  3 19:43:41 2012] XMMSAS bgd. selection expression = annulus(27348.752625, 27985.102081, 4350.000000, 8700.000000, X, Y) && !ellipse(26478.765900, 27787.331604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24985.781860, 27444.652283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.455017, 26666.927826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24351.110382, 27432.492249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25591.279877, 29436.553497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27546.013336, 25458.358490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28554.889954, 27100.507385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24588.191223, 28750.013367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.335724, 27874.270538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24172.615417, 28449.169342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36391.235474, 33291.329468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27935.946869, 26172.234802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26378.665985, 30408.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27629.495422, 29959.116364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26815.803284, 30050.717529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25818.823853, 30372.491150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30676.487280, 28623.573800, 369.809611, 369.809611, 0.000000, X, Y) && !ellipse(23766.492000, 26981.332000, 1203.856035, 1203.856035, 0.000000, X, Y) && !ellipse(24201.852600, 29384.384827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23486.821350, 28564.341858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26393.048279, 25104.028900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24058.847412, 25964.460175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23371.805481, 26580.912842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28397.914001, 25815.428070, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep  3 19:43:41 2012] Writing fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src2.gif
[Mon Sep  3 19:46:09 2012] Mean detx,y = (-531.30, -134.32) 
[Mon Sep  3 19:46:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 19:49:16 2012] grppha failed
[Mon Sep  3 19:49:16 2012] Setting source spectrum file to fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src2_src.pi.gz
[Mon Sep  3 19:49:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Sep  3 19:55:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Sep  3 19:55:27 2012] rmf not generated due to insufficient counts
[Mon Sep  3 19:56:02 2012] Updating aperture counts using extracted products
[Mon Sep  3 19:56:02 2012] Error reading totcts from fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src2_src.pi.gz
[Mon Sep  3 19:56:02 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 19:56:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Sep  3 19:56:05 2012] xmm0504780401/analysis//spectral/fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete