[Mon Sep  3 10:40:21 2012] Detection parameters:
  Position = (353.2, 329.5) = 14 7 14.19 -27 0 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.2 +/- 17.4
  Background counts = 78.8
  Rate = 0.004 +/- 0.0007

[Mon Sep  3 10:40:22 2012] Off-axis axis estimate = 4.56'
[Mon Sep  3 15:01:49 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 15:01:49 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Mon Sep  3 15:01:49 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Mon Sep  3 15:01:49 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.71"
[Mon Sep  3 16:09:12 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src17.ximg exists
[Mon Sep  3 16:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src17.csv
[Mon Sep  3 16:09:12 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Sep  3 16:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src17.csv
[Mon Sep  3 16:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 16:09:12 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Sep  3 16:09:12 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Sep  3 16:09:12 2012] Fit fullrun_mos2_xmm0504780401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Sep  3 16:09:35 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.117745 pixels away
[Mon Sep  3 16:09:35 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 16:09:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 16:09:35 2012] Assessing source extent using major
[Mon Sep  3 16:09:35 2012] Source does appear to be extended
[Mon Sep  3 16:09:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 18:06:59 2012] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:06:59 2012] Initial guess for spatial extent in simple fitting = 8.71"
[Mon Sep  3 18:06:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.998
[Mon Sep  3 18:06:59 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.71"
[Mon Sep  3 19:09:54 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src17.ximg exists
[Mon Sep  3 19:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src17.csv
[Mon Sep  3 19:09:54 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Sep  3 19:09:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src17.csv
[Mon Sep  3 19:09:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 19:09:55 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Sep  3 19:09:55 2012] fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Sep  3 19:09:55 2012] Fit fullrun_mos2_xmm0504780401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Sep  3 19:10:11 2012] Spatial fit model total counts = 942.795000, observed total counts = 936.000000
[Mon Sep  3 19:10:11 2012] Offset between fit and detection position for source 18 = 0.079310 pixels
[Mon Sep  3 19:10:11 2012] 925.073200 total counts/ 859.657000 bgd. counts: snr = 2.231119
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.079310 pixels
  Position = (353.2, 329.6) = 14 7 14.20 -27 0 23.7
  Extent = 4.6 (3.5-6.3)", rotation angle = 0
  Source counts = 65.4 +/- 30.4
  Background counts = 859.7
  Rate = 0.002 +/- 0.001
[Mon Sep  3 19:10:11 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 19:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 19:10:11 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 19:10:11 2012] Source does appear to be extended
[Mon Sep  3 19:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 19:43:42 2012] XMMSAS src. selection expression = ellipse(30676.487280, 28623.573800, 277.357208, 277.357208, 0.000000, X, Y)
[Mon Sep  3 19:43:42 2012] Writing source region out to fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src18_src.reg
[Mon Sep  3 19:43:42 2012] Extracting stamp from image fullrun_mos2_xmm0504780401_pi300-10000_cl_sm2.00.img.gz, (337, 314) - (369, 346)
[Mon Sep  3 19:43:42 2012] XMMSAS bgd. selection expression = annulus(30676.487280, 28623.573800, 462.262013, 924.524027, X, Y)
[Mon Sep  3 19:43:42 2012] Writing fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src18.gif
[Mon Sep  3 19:52:40 2012] Mean detx,y = (-4212.51, -760.66) 
[Mon Sep  3 19:52:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 19:52:46 2012] grppha failed
[Mon Sep  3 19:52:46 2012] Setting source spectrum file to fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src18_src.pi.gz
[Mon Sep  3 19:52:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Sep  3 19:55:28 2012] Not generating rmf since there are only 65 counts
[Mon Sep  3 19:55:28 2012] rmf not generated due to insufficient counts
[Mon Sep  3 19:56:02 2012] Updating aperture counts using extracted products
[Mon Sep  3 19:56:02 2012] Error reading totcts from fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src18_src.pi.gz
[Mon Sep  3 19:56:02 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 19:56:04 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep  3 19:56:05 2012] xmm0504780401/analysis//spectral/fullrun_mos2_xmm0504780401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete