[Mon May 21 14:48:36 2012] Detection parameters:
  Position = (293.5, 334.4) = 14 7 32.51 -27 0 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3319.0 +/- 81.6
  Background counts = 867.4
  Rate = 0.04 +/- 0.001

[Mon May 21 14:48:40 2012] Off-axis axis estimate = 2.63'
[Mon May 21 15:02:37 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Mon May 21 15:02:37 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Mon May 21 15:02:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.058
[Mon May 21 15:02:37 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.74"
[Tue May 22 22:31:48 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 22 22:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src5.csv
[Tue May 22 22:31:48 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 22 22:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src5.csv
[Tue May 22 22:31:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 22:31:50 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 22 22:31:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 22 22:31:50 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 22 22:31:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 22 22:31:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 03:42:04 2012] Spatial fit model total counts = 27423.100000, observed total counts = 19973.000000
[Wed May 23 03:42:04 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 03:42:04 2012] Vigneting correction estimate = 1.000000
[Wed May 23 03:42:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 03:42:04 2012] Assessing source extent using major
[Wed May 23 03:42:04 2012] Source does appear to be extended
[Wed May 23 03:42:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 03:42:04 2012] Source is confused with source 4
[Wed May 23 03:43:01 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Wed May 23 03:43:01 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Wed May 23 03:43:01 2012] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.058
[Wed May 23 03:43:01 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.74"
[Wed May 23 07:29:55 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 23 07:29:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src5.csv
[Wed May 23 07:29:55 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 23 07:29:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src5.csv
[Wed May 23 07:29:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May 23 07:29:56 2012] fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 23 07:29:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed May 23 07:29:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504780301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 13:16:00 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.220185 pixels away
[Wed May 23 13:16:00 2012] Source 5 is offset by -5.427881 and 6.519959 pixels which is larger than
2 X fitted extent = 5.083494 x 5.083494, not incorporating fit results
[Wed May 23 13:16:00 2012] Vigneting correction estimate = 1.000000
[Wed May 23 13:16:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 13:16:00 2012] Assessing source extent using major
[Wed May 23 13:16:00 2012] Source does appear to be extended
[Wed May 23 13:16:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:16:51 2012] Counts = 3318.957275, rescaling region sizes by 2.000000
[Wed May 23 13:16:51 2012] XMMSAS src. selection expression = ellipse(25481.810364, 29042.366608, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 23 13:16:51 2012] Writing source region out to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src5_src.reg
[Wed May 23 13:16:51 2012] Extracting stamp from image fullrun_pn_xmm0504780301_pi300-10000_cl_sm2.00.img.gz, (218, 259) - (368, 409)
[Wed May 23 13:16:51 2012] XMMSAS bgd. selection expression = annulus(25481.810364, 29042.366608, 4350.000000, 8700.000000, X, Y) && !ellipse(26225.736000, 27937.891000, 3480.984100, 3480.984100, 0.000000, X, Y) && !ellipse(22177.058228, 27066.175201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.103973, 28777.036255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26313.123932, 29586.291840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16388.050934, 23850.775421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26062.412640, 30492.983600, 390.596011, 390.596011, 0.000000, X, Y) && !ellipse(30380.618195, 28632.597351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23462.304810, 26913.189758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24170.671936, 26118.927124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34329.812317, 38433.022034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18895.007919, 37219.161224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29182.177795, 36053.382996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33847.428009, 34113.902679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20280.692932, 31018.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22651.618164, 30822.996521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34971.206329, 27905.400757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.112640, 27682.508392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.541718, 28008.986725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.421631, 27352.374084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.483459, 26402.813477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29042.852478, 26147.856323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.413727, 26147.404968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30609.194977, 25700.077667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.962158, 25710.851776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29089.575684, 25526.106873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28817.870000, 25327.644000, 1189.248034, 1189.248034, 0.000000, X, Y) && !ellipse(26421.322000, 24183.706000, 1125.584032, 1125.584032, 0.000000, X, Y) && !ellipse(24789.997345, 25078.394592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27712.645600, 24162.050000, 1168.904034, 1168.904034, 0.000000, X, Y) && !ellipse(24683.662000, 24633.863600, 1183.608034, 1183.608034, 0.000000, X, Y) && !ellipse(24152.360199, 24399.081451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22368.058400, 24036.915400, 498.035214, 498.035214, 0.000000, X, Y) && !ellipse(22161.251600, 23160.359200, 555.728816, 555.728816, 0.000000, X, Y) && !ellipse(19683.003320, 22086.663600, 382.360011, 382.360011, 0.000000, X, Y) && !ellipse(20628.708862, 21520.322128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22415.272040, 20999.786600, 384.506466, 384.506466, 0.000000, X, Y) && !ellipse(24235.933100, 20793.317800, 489.296814, 489.296814, 0.000000, X, Y) && !ellipse(28595.012756, 20583.521591, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 13:16:51 2012] Writing fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src5.gif
[Wed May 23 13:47:58 2012] Mean detx,y = (114.29, -933.78) 
[Wed May 23 13:48:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 13:52:27 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 13:52:28 2012] Setting source spectrum file to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 23 13:52:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504780301_pi300-10000_pass1_cl_src5_bgd.pi.gz